diff mbox series

[v3,04/12] bisect--helper: reimplement `bisect_autostart` shell function in C

Message ID 20200423070704.39872-5-mirucam@gmail.com (mailing list archive)
State New, archived
Headers show
Series Finish converting git bisect to C part 2 | expand

Commit Message

Miriam R. April 23, 2020, 7:06 a.m. UTC 
From: Pranit Bauva <pranit.bauva@gmail.com>

Reimplement the `bisect_autostart()` shell function in C and add the
C implementation from `bisect_next()` which was previously left
uncovered. Also add a subcommand `--bisect-autostart` to
`git bisect--helper` be called from `bisect_state()` from
git-bisect.sh .

Using `--bisect-autostart` subcommand is a temporary measure to port
shell function to C so as to use the existing test suite. As more
functions are ported, this subcommand will be retired and
bisect_autostart() will be called directly by `bisect_state()`.

Mentored-by: Lars Schneider <larsxschneider@gmail.com>
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Mentored-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Pranit Bauva <pranit.bauva@gmail.com>
Signed-off-by: Tanushree Tumane <tanushreetumane@gmail.com>
Signed-off-by: Miriam Rubio <mirucam@gmail.com>
---
 builtin/bisect--helper.c | 40 +++++++++++++++++++++++++++++++++++++++-
 git-bisect.sh            | 25 ++-----------------------
 2 files changed, 41 insertions(+), 24 deletions(-)

Comments

Johannes Schindelin May 22, 2020, 7:27 p.m. UTC | #1 
Hi Miriam,

On Thu, 23 Apr 2020, Miriam Rubio wrote:

> From: Pranit Bauva <pranit.bauva@gmail.com>
>
> Reimplement the `bisect_autostart()` shell function in C and add the
> C implementation from `bisect_next()` which was previously left
> uncovered. Also add a subcommand `--bisect-autostart` to
> `git bisect--helper` be called from `bisect_state()` from
> git-bisect.sh .

I know you did not author this, but maybe I can still ask you to address a
couple of concerns I have? I kind of stumble when I read "Also add a
subcommand ... be called from ... from ...".

Also, why the funny space before the full stop?

> Using `--bisect-autostart` subcommand is a temporary measure to port
> shell function to C so as to use the existing test suite. As more

Likewise, "... to port shell function..." might benefit from inserting
"the" in the middle?

> functions are ported, this subcommand will be retired and
> bisect_autostart() will be called directly by `bisect_state()`.
>
> Mentored-by: Lars Schneider <larsxschneider@gmail.com>
> Mentored-by: Christian Couder <chriscool@tuxfamily.org>
> Mentored-by: Johannes Schindelin <johannes.schindelin@gmx.de>
> Signed-off-by: Pranit Bauva <pranit.bauva@gmail.com>
> Signed-off-by: Tanushree Tumane <tanushreetumane@gmail.com>
> Signed-off-by: Miriam Rubio <mirucam@gmail.com>
> ---
>  builtin/bisect--helper.c | 40 +++++++++++++++++++++++++++++++++++++++-
>  git-bisect.sh            | 25 ++-----------------------
>  2 files changed, 41 insertions(+), 24 deletions(-)
>
> diff --git a/builtin/bisect--helper.c b/builtin/bisect--helper.c
> index d3b2b33df0..9df69800e3 100644
> --- a/builtin/bisect--helper.c
> +++ b/builtin/bisect--helper.c
> @@ -29,6 +29,7 @@ static const char * const git_bisect_helper_usage[] = {
>  	N_("git bisect--helper --bisect-terms [--term-good | --term-old | --term-bad | --term-new]"),
>  	N_("git bisect--helper --bisect-start [--term-{old,good}=<term> --term-{new,bad}=<term>]"
>  					     "[--no-checkout] [<bad> [<good>...]] [--] [<paths>...]"),
> +	N_("git bisect--helper --bisect-autostart"),
>  	NULL
>  };
>
> @@ -55,6 +56,8 @@ static void set_terms(struct bisect_terms *terms, const char *bad,
>  static const char vocab_bad[] = "bad|new";
>  static const char vocab_good[] = "good|old";
>
> +static int bisect_autostart(struct bisect_terms *terms);
> +

Why forward-declare it? There is no reference before it is defined below,
so I think this forward-declaration can be removed without any problem.

>  /*
>   * Check whether the string `term` belongs to the set of strings
>   * included in the variable arguments.
> @@ -630,6 +633,32 @@ static int bisect_start(struct bisect_terms *terms, int no_checkout,
>  	return res;
>  }
>
> +static int bisect_autostart(struct bisect_terms *terms)
> +{
> +	const char *yesno;
> +
> +	if (!is_empty_or_missing_file(git_path_bisect_start()))
> +		return 0;

This is a bit more convoluted to read than the shell script:

	bisect_autostart() {
		test -s "$GIT_DIR/BISECT_START" || {
			gettextln "You need to start by \"git bisect start\"" >&2
			[...]
		}
	}

The `test -s <file>` command succeeds if the file exists and is non-empty.
Which makes sense: either the file exists and is non-empty, or we need to
do something.

When I read the C version, it takes me a bit more time to figure out what
is going on here. Maybe we could introduce a helper function like this and
use it here?

	static inline int file_is_not_empty(const char *path)
	{
		return !is_empty_or_missing_file(path);
	}

> +
> +	fprintf(stderr, _("You need to start by \"git bisect "
> +			  "start\"\n"));

If you use `fprintf_ln()` here, you can keep the string identical to the
shell script version, i.e. without the trailing newline. That will allow
the translations to be re-used, lessening the burden of the i18n team.

> +
> +	if (!isatty(STDIN_FILENO))
> +		return 1;

I would prefer it if only `cmd_*()` functions return positive values for
the error case.
> +
> +	/*
> +	 * TRANSLATORS: Make sure to include [Y] and [n] in your
> +	 * translation. The program will only accept English input
> +	 * at this point.
> +	 */
> +	yesno = git_prompt(_("Do you want me to do it for you "
> +			     "[Y/n]? "), PROMPT_ECHO);

Technically, `PROMPT_ECHO` is not required here as `git_prompt()` adds
that flag implicitly unless you pass in `PASS_ASKPASS`, but I guess it
does not hurt here.

However, I cannot fail to note that this constitutes a change of behavior,
as `git_prompt()` does _not_ read from `stdin`.

Maybe we should call `git_read_line_interactively()` instead, after
writing the prompt to `stderr` explicitly?

> +	if (starts_with(yesno, _("n")) || starts_with(yesno, _("N")))

This is wrong: "n" and "N" should not be translated, as they are not
translated in the shell script version, either:

			case "$yesno" in
			[Nn]*)
				exit ;;
			esac

In light of this, a much, much shorter version would be:

	if (tolower(*yesno) == 'n')
		return -1;

(I use `-1` here because this is not within a `cmd_*()` function.)

However, I still think that we need to call `free(yesno);` or we leak
memory. My preferred way would be:

		int ret;
		[...]

		ret = tolower(*yesno) == 'n' ?
			-1 : bisect_start(terms, 0, NULL, 0);

		free(yesno);
		return ret;

> +		return 1;
> +
> +	return bisect_start(terms, 0, NULL, 0);
> +}
> +
>  int cmd_bisect__helper(int argc, const char **argv, const char *prefix)
>  {
>  	enum {
> @@ -642,7 +671,8 @@ int cmd_bisect__helper(int argc, const char **argv, const char *prefix)
>  		CHECK_AND_SET_TERMS,
>  		BISECT_NEXT_CHECK,
>  		BISECT_TERMS,
> -		BISECT_START
> +		BISECT_START,
> +		BISECT_AUTOSTART,
>  	} cmdmode = 0;
>  	int no_checkout = 0, res = 0, nolog = 0;
>  	struct option options[] = {
> @@ -666,6 +696,8 @@ int cmd_bisect__helper(int argc, const char **argv, const char *prefix)
>  			 N_("print out the bisect terms"), BISECT_TERMS),
>  		OPT_CMDMODE(0, "bisect-start", &cmdmode,
>  			 N_("start the bisect session"), BISECT_START),
> +		OPT_CMDMODE(0, "bisect-autostart", &cmdmode,
> +			 N_("start the bisection if BISECT_START is empty or missing"), BISECT_AUTOSTART),

Not that it matters a lot because this command mode will go away soon
thereafter, but this describes an implementation detail rather than the
purpose of the function. I would much rather read "start the bisection if
it has not yet been started" instead.

>  		OPT_BOOL(0, "no-checkout", &no_checkout,
>  			 N_("update BISECT_HEAD instead of checking out the current commit")),
>  		OPT_BOOL(0, "no-log", &nolog,
> @@ -727,6 +759,12 @@ int cmd_bisect__helper(int argc, const char **argv, const char *prefix)
>  		set_terms(&terms, "bad", "good");
>  		res = bisect_start(&terms, no_checkout, argv, argc);
>  		break;
> +	case BISECT_AUTOSTART:
> +		if (argc)
> +			return error(_("--bisect-autostart requires 0 arguments"));

Maybe "--bisect-autostart does not accept arguments" instead?

Ciao,
Dscho

> +		set_terms(&terms, "bad", "good");
> +		res = bisect_autostart(&terms);
> +		break;
>  	default:
>  		BUG("unknown subcommand %d", (int)cmdmode);
>  	}
> diff --git a/git-bisect.sh b/git-bisect.sh
> index efee12b8b1..426d443e7e 100755
> --- a/git-bisect.sh
> +++ b/git-bisect.sh
> @@ -49,27 +49,6 @@ bisect_head()
>  	fi
>  }
>
> -bisect_autostart() {
> -	test -s "$GIT_DIR/BISECT_START" || {
> -		gettextln "You need to start by \"git bisect start\"" >&2
> -		if test -t 0
> -		then
> -			# TRANSLATORS: Make sure to include [Y] and [n] in your
> -			# translation. The program will only accept English input
> -			# at this point.
> -			gettext "Do you want me to do it for you [Y/n]? " >&2
> -			read yesno
> -			case "$yesno" in
> -			[Nn]*)
> -				exit ;;
> -			esac
> -			bisect_start
> -		else
> -			exit 1
> -		fi
> -	}
> -}
> -
>  bisect_start() {
>  	git bisect--helper --bisect-start $@ || exit
>
> @@ -108,7 +87,7 @@ bisect_skip() {
>  }
>
>  bisect_state() {
> -	bisect_autostart
> +	git bisect--helper --bisect-autostart
>  	state=$1
>  	git bisect--helper --check-and-set-terms $state $TERM_GOOD $TERM_BAD || exit
>  	get_terms
> @@ -149,7 +128,7 @@ bisect_auto_next() {
>
>  bisect_next() {
>  	case "$#" in 0) ;; *) usage ;; esac
> -	bisect_autostart
> +	git bisect--helper --bisect-autostart
>  	git bisect--helper --bisect-next-check $TERM_GOOD $TERM_BAD $TERM_GOOD|| exit
>
>  	# Perform all bisection computation, display and checkout
> --
> 2.25.0
>
>
Johannes Schindelin May 22, 2020, 8:50 p.m. UTC | #2 
Hi Miriam,

On Fri, 22 May 2020, Johannes Schindelin wrote:

> On Thu, 23 Apr 2020, Miriam Rubio wrote:
>
> > +	/*
> > +	 * TRANSLATORS: Make sure to include [Y] and [n] in your
> > +	 * translation. The program will only accept English input
> > +	 * at this point.
> > +	 */
> > +	yesno = git_prompt(_("Do you want me to do it for you "
> > +			     "[Y/n]? "), PROMPT_ECHO);
>
> [...]
>
> I still think that we need to call `free(yesno);` or we leak memory.

Never mind. I got fooled by the fact that `git_prompt()` returns `char *`.
It actually returns the pointer `buf.buf` of a `static `strbuf buf`, so
there is nothing to `free()` here.

Sorry for the noise,
Dscho
diff mbox series

Patch

diff --git a/builtin/bisect--helper.c b/builtin/bisect--helper.c
index d3b2b33df0..9df69800e3 100644
--- a/builtin/bisect--helper.c
+++ b/builtin/bisect--helper.c
@@ -29,6 +29,7 @@  static const char * const git_bisect_helper_usage[] = {
 	N_("git bisect--helper --bisect-terms [--term-good | --term-old | --term-bad | --term-new]"),
 	N_("git bisect--helper --bisect-start [--term-{old,good}=<term> --term-{new,bad}=<term>]"
 					     "[--no-checkout] [<bad> [<good>...]] [--] [<paths>...]"),
+	N_("git bisect--helper --bisect-autostart"),
 	NULL
 };
 
@@ -55,6 +56,8 @@  static void set_terms(struct bisect_terms *terms, const char *bad,
 static const char vocab_bad[] = "bad|new";
 static const char vocab_good[] = "good|old";
 
+static int bisect_autostart(struct bisect_terms *terms);
+
 /*
  * Check whether the string `term` belongs to the set of strings
  * included in the variable arguments.
@@ -630,6 +633,32 @@  static int bisect_start(struct bisect_terms *terms, int no_checkout,
 	return res;
 }
 
+static int bisect_autostart(struct bisect_terms *terms)
+{
+	const char *yesno;
+
+	if (!is_empty_or_missing_file(git_path_bisect_start()))
+		return 0;
+
+	fprintf(stderr, _("You need to start by \"git bisect "
+			  "start\"\n"));
+
+	if (!isatty(STDIN_FILENO))
+		return 1;
+
+	/*
+	 * TRANSLATORS: Make sure to include [Y] and [n] in your
+	 * translation. The program will only accept English input
+	 * at this point.
+	 */
+	yesno = git_prompt(_("Do you want me to do it for you "
+			     "[Y/n]? "), PROMPT_ECHO);
+	if (starts_with(yesno, _("n")) || starts_with(yesno, _("N")))
+		return 1;
+
+	return bisect_start(terms, 0, NULL, 0);
+}
+
 int cmd_bisect__helper(int argc, const char **argv, const char *prefix)
 {
 	enum {
@@ -642,7 +671,8 @@  int cmd_bisect__helper(int argc, const char **argv, const char *prefix)
 		CHECK_AND_SET_TERMS,
 		BISECT_NEXT_CHECK,
 		BISECT_TERMS,
-		BISECT_START
+		BISECT_START,
+		BISECT_AUTOSTART,
 	} cmdmode = 0;
 	int no_checkout = 0, res = 0, nolog = 0;
 	struct option options[] = {
@@ -666,6 +696,8 @@  int cmd_bisect__helper(int argc, const char **argv, const char *prefix)
 			 N_("print out the bisect terms"), BISECT_TERMS),
 		OPT_CMDMODE(0, "bisect-start", &cmdmode,
 			 N_("start the bisect session"), BISECT_START),
+		OPT_CMDMODE(0, "bisect-autostart", &cmdmode,
+			 N_("start the bisection if BISECT_START is empty or missing"), BISECT_AUTOSTART),
 		OPT_BOOL(0, "no-checkout", &no_checkout,
 			 N_("update BISECT_HEAD instead of checking out the current commit")),
 		OPT_BOOL(0, "no-log", &nolog,
@@ -727,6 +759,12 @@  int cmd_bisect__helper(int argc, const char **argv, const char *prefix)
 		set_terms(&terms, "bad", "good");
 		res = bisect_start(&terms, no_checkout, argv, argc);
 		break;
+	case BISECT_AUTOSTART:
+		if (argc)
+			return error(_("--bisect-autostart requires 0 arguments"));
+		set_terms(&terms, "bad", "good");
+		res = bisect_autostart(&terms);
+		break;
 	default:
 		BUG("unknown subcommand %d", (int)cmdmode);
 	}
diff --git a/git-bisect.sh b/git-bisect.sh
index efee12b8b1..426d443e7e 100755
--- a/git-bisect.sh
+++ b/git-bisect.sh
@@ -49,27 +49,6 @@  bisect_head()
 	fi
 }
 
-bisect_autostart() {
-	test -s "$GIT_DIR/BISECT_START" || {
-		gettextln "You need to start by \"git bisect start\"" >&2
-		if test -t 0
-		then
-			# TRANSLATORS: Make sure to include [Y] and [n] in your
-			# translation. The program will only accept English input
-			# at this point.
-			gettext "Do you want me to do it for you [Y/n]? " >&2
-			read yesno
-			case "$yesno" in
-			[Nn]*)
-				exit ;;
-			esac
-			bisect_start
-		else
-			exit 1
-		fi
-	}
-}
-
 bisect_start() {
 	git bisect--helper --bisect-start $@ || exit
 
@@ -108,7 +87,7 @@  bisect_skip() {
 }
 
 bisect_state() {
-	bisect_autostart
+	git bisect--helper --bisect-autostart
 	state=$1
 	git bisect--helper --check-and-set-terms $state $TERM_GOOD $TERM_BAD || exit
 	get_terms
@@ -149,7 +128,7 @@  bisect_auto_next() {
 
 bisect_next() {
 	case "$#" in 0) ;; *) usage ;; esac
-	bisect_autostart
+	git bisect--helper --bisect-autostart
 	git bisect--helper --bisect-next-check $TERM_GOOD $TERM_BAD $TERM_GOOD|| exit
 
 	# Perform all bisection computation, display and checkout