[v2,net-next,1/3] ptp: Add adjphase function to support phase offset control.
diff mbox series

Message ID 1588390538-24589-2-git-send-email-vincent.cheng.xh@renesas.com
State Accepted
Commit 184ecc9eb260d5a3bcdddc5bebd18f285ac004e9
Headers show
Series
  • ptp: Add adjust phase to support phase offset.
Related show

Commit Message

Vincent Cheng May 2, 2020, 3:35 a.m. UTC
From: Vincent Cheng <vincent.cheng.xh@renesas.com>

Adds adjust phase function to take advantage of a PHC
clock's hardware filtering capability that uses phase offset
control word instead of frequency offset control word.

Signed-off-by: Vincent Cheng <vincent.cheng.xh@renesas.com>
---
 drivers/ptp/ptp_clock.c          | 3 +++
 include/linux/ptp_clock_kernel.h | 6 +++++-
 2 files changed, 8 insertions(+), 1 deletion(-)

Comments

Richard Cochran May 2, 2020, 8:09 p.m. UTC | #1
On Fri, May 01, 2020 at 11:35:36PM -0400, vincent.cheng.xh@renesas.com wrote:
> From: Vincent Cheng <vincent.cheng.xh@renesas.com>
> 
> Adds adjust phase function to take advantage of a PHC
> clock's hardware filtering capability that uses phase offset
> control word instead of frequency offset control word.
> 
> Signed-off-by: Vincent Cheng <vincent.cheng.xh@renesas.com>

Reviewed-by: Richard Cochran <richardcochran@gmail.com>

Patch
diff mbox series

diff --git a/drivers/ptp/ptp_clock.c b/drivers/ptp/ptp_clock.c
index acabbe7..fc984a8 100644
--- a/drivers/ptp/ptp_clock.c
+++ b/drivers/ptp/ptp_clock.c
@@ -146,6 +146,9 @@  static int ptp_clock_adjtime(struct posix_clock *pc, struct __kernel_timex *tx)
 		else
 			err = ops->adjfreq(ops, ppb);
 		ptp->dialed_frequency = tx->freq;
+	} else if (tx->modes & ADJ_OFFSET) {
+		if (ops->adjphase)
+			err = ops->adjphase(ops, tx->offset);
 	} else if (tx->modes == 0) {
 		tx->freq = ptp->dialed_frequency;
 		err = 0;
diff --git a/include/linux/ptp_clock_kernel.h b/include/linux/ptp_clock_kernel.h
index 121a7ed..31144d9 100644
--- a/include/linux/ptp_clock_kernel.h
+++ b/include/linux/ptp_clock_kernel.h
@@ -36,7 +36,7 @@  struct ptp_system_timestamp {
 };
 
 /**
- * struct ptp_clock_info - decribes a PTP hardware clock
+ * struct ptp_clock_info - describes a PTP hardware clock
  *
  * @owner:     The clock driver should set to THIS_MODULE.
  * @name:      A short "friendly name" to identify the clock and to
@@ -65,6 +65,9 @@  struct ptp_system_timestamp {
  *            parameter delta: Desired frequency offset from nominal frequency
  *            in parts per billion
  *
+ * @adjphase:  Adjusts the phase offset of the hardware clock.
+ *             parameter delta: Desired change in nanoseconds.
+ *
  * @adjtime:  Shifts the time of the hardware clock.
  *            parameter delta: Desired change in nanoseconds.
  *
@@ -128,6 +131,7 @@  struct ptp_clock_info {
 	struct ptp_pin_desc *pin_config;
 	int (*adjfine)(struct ptp_clock_info *ptp, long scaled_ppm);
 	int (*adjfreq)(struct ptp_clock_info *ptp, s32 delta);
+	int (*adjphase)(struct ptp_clock_info *ptp, s32 phase);
 	int (*adjtime)(struct ptp_clock_info *ptp, s64 delta);
 	int (*gettime64)(struct ptp_clock_info *ptp, struct timespec64 *ts);
 	int (*gettimex64)(struct ptp_clock_info *ptp, struct timespec64 *ts,