diff mbox series

[v2,02/34] media: uapi: Add MEDIA_BUS_FMT_SENSOR_DATA media bus format

Message ID 20200504092611.9798-3-laurent.pinchart@ideasonboard.com (mailing list archive)
State New, archived
Headers show
Series Drivers for the BCM283x CSI-2/CCP2 receiver and ISP | expand

Commit Message

Laurent Pinchart May 4, 2020, 9:25 a.m. UTC 
From: Naushir Patuck <naush@raspberrypi.com>

This patch adds MEDIA_BUS_FMT_SENSOR_DATA used by the bcm2835-unicam
driver to support CSI-2 embedded data streams from camera sensors.

Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
---
 .../media/uapi/v4l/subdev-formats.rst         | 33 +++++++++++++++++++
 include/uapi/linux/media-bus-format.h         |  3 ++
 2 files changed, 36 insertions(+)
diff mbox series

Patch

diff --git a/Documentation/media/uapi/v4l/subdev-formats.rst b/Documentation/media/uapi/v4l/subdev-formats.rst
index 17bfb2beaa6a..e79caa61b9ce 100644
--- a/Documentation/media/uapi/v4l/subdev-formats.rst
+++ b/Documentation/media/uapi/v4l/subdev-formats.rst
@@ -7831,3 +7831,36 @@  formats.
       - 0x5001
       - Interleaved raw UYVY and JPEG image format with embedded meta-data
 	used by Samsung S3C73MX camera sensors.
+
+
+
+.. _v4l2-mbus-sensor-data:
+
+Sensor Ancillary Metadata Formats
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+This section lists ancillary data generated by a camera sensor and
+transmitted over a stream on the camera bus.
+
+The following table lists the existing sensor ancillary metadata formats:
+
+
+.. _v4l2-mbus-pixelcode-sensor-metadata:
+
+.. tabularcolumns:: |p{8.0cm}|p{1.4cm}|p{7.7cm}|
+
+.. flat-table:: Sensor ancillary metadata formats
+    :header-rows:  1
+    :stub-columns: 0
+
+    * - Identifier
+      - Code
+      - Comments
+    * .. _MEDIA_BUS_FMT_SENSOR_DATA:
+
+      - MEDIA_BUS_FMT_SENSOR_DATA
+      - 0x7001
+      - Sensor vendor specific ancillary metadata. Some vendors follow a generic
+        CSI-2/SMIA embedded data format as described in the `CSI-2 specification.
+	<https://mipi.org/specifications/csi-2>`_
+
diff --git a/include/uapi/linux/media-bus-format.h b/include/uapi/linux/media-bus-format.h
index 84fa53ffb13f..3c2848e91c1b 100644
--- a/include/uapi/linux/media-bus-format.h
+++ b/include/uapi/linux/media-bus-format.h
@@ -156,4 +156,7 @@ 
 /* HSV - next is	0x6002 */
 #define MEDIA_BUS_FMT_AHSV8888_1X32		0x6001
 
+/* Sensor ancillary metadata formats - next is 0x7002 */
+#define MEDIA_BUS_FMT_SENSOR_DATA		0x7001
+
 #endif /* __LINUX_MEDIA_BUS_FORMAT_H */