diff mbox series

[v2,13/34] staging: mmal-vchiq: Support sending data to MMAL ports

Message ID 20200504092611.9798-14-laurent.pinchart@ideasonboard.com (mailing list archive)
State New, archived
Headers show
Series Drivers for the BCM283x CSI-2/CCP2 receiver and ISP | expand

Commit Message

Laurent Pinchart May 4, 2020, 9:25 a.m. UTC 
From: Dave Stevenson <dave.stevenson@raspberrypi.org>

Add the ability to send data to ports. This only supports
zero copy mode as the required bulk transfer setup calls
are not done.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
---
 .../vc04_services/vchiq-mmal/mmal-vchiq.c      | 18 +++++++++++++-----
 1 file changed, 13 insertions(+), 5 deletions(-)
diff mbox series

Patch

diff --git a/drivers/staging/vc04_services/vchiq-mmal/mmal-vchiq.c b/drivers/staging/vc04_services/vchiq-mmal/mmal-vchiq.c
index 8358e25851c1..63a46818184f 100644
--- a/drivers/staging/vc04_services/vchiq-mmal/mmal-vchiq.c
+++ b/drivers/staging/vc04_services/vchiq-mmal/mmal-vchiq.c
@@ -422,11 +422,19 @@  buffer_from_host(struct vchiq_mmal_instance *instance,
 	m.u.buffer_from_host.buffer_header.data =
 		(u32)(unsigned long)buf->buffer;
 	m.u.buffer_from_host.buffer_header.alloc_size = buf->buffer_size;
-	m.u.buffer_from_host.buffer_header.length = 0;	/* nothing used yet */
-	m.u.buffer_from_host.buffer_header.offset = 0;	/* no offset */
-	m.u.buffer_from_host.buffer_header.flags = 0;	/* no flags */
-	m.u.buffer_from_host.buffer_header.pts = MMAL_TIME_UNKNOWN;
-	m.u.buffer_from_host.buffer_header.dts = MMAL_TIME_UNKNOWN;
+	if (port->type == MMAL_PORT_TYPE_OUTPUT) {
+		m.u.buffer_from_host.buffer_header.length = 0;
+		m.u.buffer_from_host.buffer_header.offset = 0;
+		m.u.buffer_from_host.buffer_header.flags = 0;
+		m.u.buffer_from_host.buffer_header.pts = MMAL_TIME_UNKNOWN;
+		m.u.buffer_from_host.buffer_header.dts = MMAL_TIME_UNKNOWN;
+	} else {
+		m.u.buffer_from_host.buffer_header.length = buf->length;
+		m.u.buffer_from_host.buffer_header.offset = 0;
+		m.u.buffer_from_host.buffer_header.flags = buf->mmal_flags;
+		m.u.buffer_from_host.buffer_header.pts = buf->pts;
+		m.u.buffer_from_host.buffer_header.dts = buf->dts;
+	}
 
 	/* clear buffer type sepecific data */
 	memset(&m.u.buffer_from_host.buffer_header_type_specific, 0,