| Message ID | 1236889769-32587-1-git-send-email-premi@ti.com (mailing list archive) |
|---|---|
| State | Superseded |
| Delegated to: | Kevin Hilman |
| Headers | show |
Sanjeev Premi <premi@ti.com> writes: > From: Sanjeev Premi <premi@ti.com> > Subject: [PATCH] Start C-state definitions from base 0 > To: linux-omap@vger.kernel.org > Cc: Sanjeev Premi <premi@ti.com> > Date: Fri, 13 Mar 2009 01:59:29 +0530 > > The current definition of C-states starts from base 1. > Whereas, the cpuidle driver uses base 0. This patch > eliminates need for explicit mapping due to different > base values. Thanks! > Signed-off-by: Sanjeev Premi <premi@ti.com> > --- > arch/arm/mach-omap2/cpuidle34xx.c | 21 ++++++++++----------- > 1 files changed, 10 insertions(+), 11 deletions(-) > > diff --git a/arch/arm/mach-omap2/cpuidle34xx.c b/arch/arm/mach-omap2/cpuidle34xx.c > index 62fbb2e..d7208f3 100644 > --- a/arch/arm/mach-omap2/cpuidle34xx.c > +++ b/arch/arm/mach-omap2/cpuidle34xx.c > @@ -33,13 +33,13 @@ > > #ifdef CONFIG_CPU_IDLE > > -#define OMAP3_MAX_STATES 7 > -#define OMAP3_STATE_C1 1 /* C1 - MPU WFI + Core active */ > -#define OMAP3_STATE_C2 2 /* C2 - MPU CSWR + Core active */ > -#define OMAP3_STATE_C3 3 /* C3 - MPU OFF + Core active */ > -#define OMAP3_STATE_C4 4 /* C4 - MPU RET + Core RET */ > -#define OMAP3_STATE_C5 5 /* C5 - MPU OFF + Core RET */ > -#define OMAP3_STATE_C6 6 /* C6 - MPU OFF + Core OFF */ > +#define OMAP3_MAX_STATES 6 > +#define OMAP3_STATE_C1 0 /* C1 - MPU WFI + Core active */ > +#define OMAP3_STATE_C2 1 /* C2 - MPU CSWR + Core active */ > +#define OMAP3_STATE_C3 2 /* C3 - MPU OFF + Core active */ > +#define OMAP3_STATE_C4 3 /* C4 - MPU RET + Core RET */ > +#define OMAP3_STATE_C5 4 /* C5 - MPU OFF + Core RET */ > +#define OMAP3_STATE_C6 5 /* C6 - MPU OFF + Core OFF */ > > struct omap3_processor_cx { > u8 valid; > @@ -228,7 +228,7 @@ struct cpuidle_driver omap3_idle_driver = { > */ > int omap3_idle_init(void) > { > - int i, count = 0; > + int count = 0; > struct omap3_processor_cx *cx; > struct cpuidle_state *state; > struct cpuidle_device *dev; > @@ -244,8 +244,8 @@ int omap3_idle_init(void) > > dev = &per_cpu(omap3_idle_dev, smp_processor_id()); > > - for (i = 1; i < OMAP3_MAX_STATES; i++) { > - cx = &omap3_power_states[i]; > + for (count = 1; count < OMAP3_MAX_STATES; count++) { > + cx = &omap3_power_states[count]; > state = &dev->states[count]; If you're going to drop the separation of the iterator and 'count' then you should drop the 'if (cx->valid) continue' part as well. Otherwise, states that are not valid at boot time will never be visible to CPUidle. This way, all the states, valid or not, are registered with CPUidle, and the enter hook will sort out the difference. This change may be more appropriate for for your patch which adds support for checking the valid field. Kevin -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm/mach-omap2/cpuidle34xx.c b/arch/arm/mach-omap2/cpuidle34xx.c index 62fbb2e..d7208f3 100644 --- a/arch/arm/mach-omap2/cpuidle34xx.c +++ b/arch/arm/mach-omap2/cpuidle34xx.c @@ -33,13 +33,13 @@ #ifdef CONFIG_CPU_IDLE -#define OMAP3_MAX_STATES 7 -#define OMAP3_STATE_C1 1 /* C1 - MPU WFI + Core active */ -#define OMAP3_STATE_C2 2 /* C2 - MPU CSWR + Core active */ -#define OMAP3_STATE_C3 3 /* C3 - MPU OFF + Core active */ -#define OMAP3_STATE_C4 4 /* C4 - MPU RET + Core RET */ -#define OMAP3_STATE_C5 5 /* C5 - MPU OFF + Core RET */ -#define OMAP3_STATE_C6 6 /* C6 - MPU OFF + Core OFF */ +#define OMAP3_MAX_STATES 6 +#define OMAP3_STATE_C1 0 /* C1 - MPU WFI + Core active */ +#define OMAP3_STATE_C2 1 /* C2 - MPU CSWR + Core active */ +#define OMAP3_STATE_C3 2 /* C3 - MPU OFF + Core active */ +#define OMAP3_STATE_C4 3 /* C4 - MPU RET + Core RET */ +#define OMAP3_STATE_C5 4 /* C5 - MPU OFF + Core RET */ +#define OMAP3_STATE_C6 5 /* C6 - MPU OFF + Core OFF */ struct omap3_processor_cx { u8 valid; @@ -228,7 +228,7 @@ struct cpuidle_driver omap3_idle_driver = { */ int omap3_idle_init(void) { - int i, count = 0; + int count = 0; struct omap3_processor_cx *cx; struct cpuidle_state *state; struct cpuidle_device *dev; @@ -244,8 +244,8 @@ int omap3_idle_init(void) dev = &per_cpu(omap3_idle_dev, smp_processor_id()); - for (i = 1; i < OMAP3_MAX_STATES; i++) { - cx = &omap3_power_states[i]; + for (count = 1; count < OMAP3_MAX_STATES; count++) { + cx = &omap3_power_states[count]; state = &dev->states[count]; if (!cx->valid) @@ -259,7 +259,6 @@ int omap3_idle_init(void) if (cx->type == OMAP3_STATE_C1) dev->safe_state = state; sprintf(state->name, "C%d", count+1); - count++; } if (!count)
The current definition of C-states starts from base 1. Whereas, the cpuidle driver uses base 0. This patch eliminates need for explicit mapping due to different base values. Signed-off-by: Sanjeev Premi <premi@ti.com> --- arch/arm/mach-omap2/cpuidle34xx.c | 21 ++++++++++----------- 1 files changed, 10 insertions(+), 11 deletions(-)