diff mbox series

[2/2] dt-bindings: thermal: tsens: Add zeroc interrupt support in yaml

Message ID 20200505111204.963-3-manafm@codeaurora.org (mailing list archive)
State New, archived
Delegated to: Daniel Lezcano
Headers show
Series Add 0C (zeorC) interrupt support to tsens driver | expand

Commit Message

Manaf Meethalavalappu Pallikunhi May 5, 2020, 11:12 a.m. UTC
Add 0C (zeroc) interrupt support for tsens in yaml.

Signed-off-by: Manaf Meethalavalappu Pallikunhi <manafm@codeaurora.org>
---
 Documentation/devicetree/bindings/thermal/qcom-tsens.yaml | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

Comments

Amit Kucheria May 5, 2020, 12:11 p.m. UTC | #1
On Tue, May 5, 2020 at 4:43 PM Manaf Meethalavalappu Pallikunhi
<manafm@codeaurora.org> wrote:
>
> Add 0C (zeroc) interrupt support for tsens in yaml.
>
> Signed-off-by: Manaf Meethalavalappu Pallikunhi <manafm@codeaurora.org>
> ---
>  Documentation/devicetree/bindings/thermal/qcom-tsens.yaml | 7 +++++--
>  1 file changed, 5 insertions(+), 2 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
> index 2ddd39d96766..8a0893f77d20 100644
> --- a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
> +++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
> @@ -52,12 +52,14 @@ properties:
>      items:
>        - description: Combined interrupt if upper or lower threshold crossed
>        - description: Interrupt if critical threshold crossed
> +      - description: Interrupt if zeroC threshold is crossed
>
>    interrupt-names:
>      minItems: 1
>      items:
>        - const: uplow
>        - const: critical
> +      - const: zeroc
>
>    nvmem-cells:
>      minItems: 1
> @@ -168,8 +170,9 @@ examples:
>                   <0xc222000 0x1ff>;
>
>             interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>,
> -                        <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>;
> -           interrupt-names = "uplow", "critical";
> +                        <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>,
> +                        <GIC_SPI 510 IRQ_TYPE_EDGE_RISING>;
> +           interrupt-names = "uplow", "critical", "zeroc";


Add a new example for v2 with 0C interrupt here instead of reusing the old one.

>             #qcom,sensors = <13>;
>             #thermal-sensor-cells = <1>;
> --
> 2.26.2
Rob Herring May 5, 2020, 3:38 p.m. UTC | #2
On Tue,  5 May 2020 16:42:04 +0530, Manaf Meethalavalappu Pallikunhi wrote:
> Add 0C (zeroc) interrupt support for tsens in yaml.
> 
> Signed-off-by: Manaf Meethalavalappu Pallikunhi <manafm@codeaurora.org>
> ---
>  Documentation/devicetree/bindings/thermal/qcom-tsens.yaml | 7 +++++--
>  1 file changed, 5 insertions(+), 2 deletions(-)
> 

My bot found errors running 'make dt_binding_check' on your patch:

/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/thermal/qcom-tsens.example.dt.yaml: thermal-sensor@c263000: interrupt-names: ['uplow', 'critical', 'zeroc'] is too long
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/thermal/qcom-tsens.example.dt.yaml: thermal-sensor@c263000: interrupts: [[0, 506, 4], [0, 508, 4], [0, 510, 1]] is too long

See https://patchwork.ozlabs.org/patch/1283470

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure dt-schema is up to date:

pip3 install git+https://github.com/devicetree-org/dt-schema.git@master --upgrade

Please check and re-submit.
Manaf Meethalavalappu Pallikunhi May 17, 2020, 10:30 a.m. UTC | #3
On 2020-05-05 17:41, Amit Kucheria wrote:
> On Tue, May 5, 2020 at 4:43 PM Manaf Meethalavalappu Pallikunhi
> <manafm@codeaurora.org> wrote:
>> 
>> Add 0C (zeroc) interrupt support for tsens in yaml.
>> 
>> Signed-off-by: Manaf Meethalavalappu Pallikunhi 
>> <manafm@codeaurora.org>
>> ---
>>  Documentation/devicetree/bindings/thermal/qcom-tsens.yaml | 7 +++++--
>>  1 file changed, 5 insertions(+), 2 deletions(-)
>> 
>> diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml 
>> b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
>> index 2ddd39d96766..8a0893f77d20 100644
>> --- a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
>> +++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
>> @@ -52,12 +52,14 @@ properties:
>>      items:
>>        - description: Combined interrupt if upper or lower threshold 
>> crossed
>>        - description: Interrupt if critical threshold crossed
>> +      - description: Interrupt if zeroC threshold is crossed
>> 
>>    interrupt-names:
>>      minItems: 1
>>      items:
>>        - const: uplow
>>        - const: critical
>> +      - const: zeroc
>> 
>>    nvmem-cells:
>>      minItems: 1
>> @@ -168,8 +170,9 @@ examples:
>>                   <0xc222000 0x1ff>;
>> 
>>             interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>,
>> -                        <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>;
>> -           interrupt-names = "uplow", "critical";
>> +                        <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>,
>> +                        <GIC_SPI 510 IRQ_TYPE_EDGE_RISING>;
>> +           interrupt-names = "uplow", "critical", "zeroc";
> 
> 
> Add a new example for v2 with 0C interrupt here instead of reusing the 
> old one.
Done
> 
>>             #qcom,sensors = <13>;
>>             #thermal-sensor-cells = <1>;
>> --
>> 2.26.2
Manaf Meethalavalappu Pallikunhi May 17, 2020, 10:32 a.m. UTC | #4
On 2020-05-05 21:08, Rob Herring wrote:
> On Tue,  5 May 2020 16:42:04 +0530, Manaf Meethalavalappu Pallikunhi 
> wrote:
>> Add 0C (zeroc) interrupt support for tsens in yaml.
>> 
>> Signed-off-by: Manaf Meethalavalappu Pallikunhi 
>> <manafm@codeaurora.org>
>> ---
>>  Documentation/devicetree/bindings/thermal/qcom-tsens.yaml | 7 +++++--
>>  1 file changed, 5 insertions(+), 2 deletions(-)
>> 
> 
> My bot found errors running 'make dt_binding_check' on your patch:
> 
> /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/thermal/qcom-tsens.example.dt.yaml:
> thermal-sensor@c263000: interrupt-names: ['uplow', 'critical',
> 'zeroc'] is too long
> /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/thermal/qcom-tsens.example.dt.yaml:
> thermal-sensor@c263000: interrupts: [[0, 506, 4], [0, 508, 4], [0,
> 510, 1]] is too long
> 
> See https://patchwork.ozlabs.org/patch/1283470
> 
> If you already ran 'make dt_binding_check' and didn't see the above
> error(s), then make sure dt-schema is up to date:
> 
> pip3 install
> git+https://github.com/devicetree-org/dt-schema.git@master --upgrade
> 
> Please check and re-submit.
Addressed above errors for 
Documentation/devicetree/bindings/thermal/qcom-tsens.yaml in v2
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
index 2ddd39d96766..8a0893f77d20 100644
--- a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
+++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
@@ -52,12 +52,14 @@  properties:
     items:
       - description: Combined interrupt if upper or lower threshold crossed
       - description: Interrupt if critical threshold crossed
+      - description: Interrupt if zeroC threshold is crossed
 
   interrupt-names:
     minItems: 1
     items:
       - const: uplow
       - const: critical
+      - const: zeroc
 
   nvmem-cells:
     minItems: 1
@@ -168,8 +170,9 @@  examples:
                  <0xc222000 0x1ff>;
 
            interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>,
-                        <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>;
-           interrupt-names = "uplow", "critical";
+                        <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>,
+                        <GIC_SPI 510 IRQ_TYPE_EDGE_RISING>;
+           interrupt-names = "uplow", "critical", "zeroc";
 
            #qcom,sensors = <13>;
            #thermal-sensor-cells = <1>;