diff mbox series

ASoC: amd :High hw_level while simultaneous capture

Message ID 20200505114023.251409-1-akshu.agrawal@amd.com (mailing list archive)
State New, archived
Headers show
Series ASoC: amd :High hw_level while simultaneous capture | expand

Commit Message

Akshu Agrawal May 5, 2020, 11:40 a.m. UTC
From: Ravulapati Vishnu vardhan rao <Vishnuvardhanrao.Ravulapati@amd.com>

Simultaneous capture on dmic and headset mic is having
issue with high hw_level being reported.

Issue Can be reproduced by:
arecord -D hw:2,0 -f dat -d 60 /tmp/test0 &
arecord -D hw:2,2 -f dat -d 60 /tmp/test1 &
cat /proc/asound/card2/pcm?c/sub0/status

Signed-off-by: Ravulapati Vishnu vardhan rao <Vishnuvardhanrao.Ravulapati@amd.com>
---
 sound/soc/amd/raven/acp3x-pcm-dma.c | 37 +++++++++++++++++++----------
 1 file changed, 24 insertions(+), 13 deletions(-)

Comments

Mark Brown May 5, 2020, 11:51 a.m. UTC | #1
On Tue, May 05, 2020 at 05:10:20PM +0530, Akshu Agrawal wrote:

> Simultaneous capture on dmic and headset mic is having
> issue with high hw_level being reported.

> Issue Can be reproduced by:
> arecord -D hw:2,0 -f dat -d 60 /tmp/test0 &
> arecord -D hw:2,2 -f dat -d 60 /tmp/test1 &
> cat /proc/asound/card2/pcm?c/sub0/status

What is a "high hw_level" and how does this patch address it?  As far as
I can see this patch reorders some of the initialzation but it's not
entirely obvious what the issue was or how this fixes it.
Mark Brown May 5, 2020, 11:52 a.m. UTC | #2
On Tue, May 05, 2020 at 05:10:20PM +0530, Akshu Agrawal wrote:

> cat /proc/asound/card2/pcm?c/sub0/status
> 
> Signed-off-by: Ravulapati Vishnu vardhan rao <Vishnuvardhanrao.Ravulapati@amd.com>

Also if you're sending a patch for someone else you need to add your
Signed-off-by - see submitting-patches.rst for details on what that is
and why it's important.
RAVULAPATI, VISHNU VARDHAN RAO May 5, 2020, 12:18 p.m. UTC | #3
[AMD Official Use Only - Internal Distribution Only]



-----Original Message-----
From: Mark Brown <broonie@kernel.org>
Sent: Tuesday, May 5, 2020 5:21 PM
To: Agrawal, Akshu <Akshu.Agrawal@amd.com>
Cc: RAVULAPATI, VISHNU VARDHAN RAO <Vishnuvardhanrao.Ravulapati@amd.com>; Liam Girdwood <lgirdwood@gmail.com>; Jaroslav Kysela <perex@perex.cz>; Takashi Iwai <tiwai@suse.com>; Mukunda, Vijendar <Vijendar.Mukunda@amd.com>; Colin Ian King <colin.king@canonical.com>; Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>; moderated list:SOUND - SOC LAYER / DYNAMIC AUDIO POWER MANAGEM... <alsa-devel@alsa-project.org>; open list <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH] ASoC: amd :High hw_level while simultaneous capture

On Tue, May 05, 2020 at 05:10:20PM +0530, Akshu Agrawal wrote:

> Simultaneous capture on dmic and headset mic is having issue with high 
> hw_level being reported.

> Issue Can be reproduced by:
> arecord -D hw:2,0 -f dat -d 60 /tmp/test0 & arecord -D hw:2,2 -f dat 
> -d 60 /tmp/test1 & cat /proc/asound/card2/pcm?c/sub0/status

What is a "high hw_level" and how does this patch address it?  As far as I can see this patch reorders some of the initialzation but it's not entirely obvious what the issue was or how this fixes it.

Actual issue is :
When we open one capture stream on one instance lets say I2S_SP and then once again if we open other capture on other instance lets say I2S_BT while first capture is in progress and when we try to read the status of both running instances by below command cat /proc/asound/card2/pcm?c/sub0/status
we observe that avail_max is being doubled on first opened capture(I2S_SP in the example).

This is because our previous implementation was like when any instance is opened it gets initialized in dma_open irrespective of on what instance it called open.
For example:
First I2S_SP called opened it initializes both SP/BT capture streams irrespective of on which instance the stream opened.next time I2S_BT called opened and it initializes both SP/BT this corrupts the behaviour .

So with this patch the stream gets initialized only on specific instance when ever it gets opened calls hw_params.

This rectifies the issue.

Thanks,
Vishnu
Mark Brown May 5, 2020, 12:22 p.m. UTC | #4
On Tue, May 05, 2020 at 12:18:45PM +0000, RAVULAPATI, VISHNU VARDHAN RAO wrote:

> > Simultaneous capture on dmic and headset mic is having issue with high 
> > hw_level being reported.

> Actual issue is :

OK, this is information that should be in the changelog so someone
looking at git history in future can understand what the change was
doing.
diff mbox series

Patch

diff --git a/sound/soc/amd/raven/acp3x-pcm-dma.c b/sound/soc/amd/raven/acp3x-pcm-dma.c
index e362f0bc9e46..a36c5cb848cd 100644
--- a/sound/soc/amd/raven/acp3x-pcm-dma.c
+++ b/sound/soc/amd/raven/acp3x-pcm-dma.c
@@ -241,14 +241,6 @@  static int acp3x_dma_open(struct snd_soc_component *component,
 		adata->i2ssp_play_stream && !adata->i2ssp_capture_stream)
 		rv_writel(1, adata->acp3x_base + mmACP_EXTERNAL_INTR_ENB);
 
-	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
-		adata->play_stream = substream;
-		adata->i2ssp_play_stream = substream;
-	} else {
-		adata->capture_stream = substream;
-		adata->i2ssp_capture_stream = substream;
-	}
-
 	i2s_data->acp3x_base = adata->acp3x_base;
 	runtime->private_data = i2s_data;
 	return ret;
@@ -263,23 +255,42 @@  static int acp3x_dma_hw_params(struct snd_soc_component *component,
 	struct snd_soc_pcm_runtime *prtd;
 	struct snd_soc_card *card;
 	struct acp3x_platform_info *pinfo;
+	struct i2s_dev_data *adata;
 	u64 size;
 
 	prtd = substream->private_data;
 	card = prtd->card;
 	pinfo = snd_soc_card_get_drvdata(card);
+	adata = dev_get_drvdata(component->dev);
 	rtd = substream->runtime->private_data;
 	if (!rtd)
 		return -EINVAL;
 
-	if (pinfo)
-		if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+	if (pinfo) {
+		if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
 			rtd->i2s_instance = pinfo->play_i2s_instance;
-		else
+			switch (rtd->i2s_instance) {
+			case I2S_BT_INSTANCE:
+				adata->play_stream = substream;
+				break;
+			case I2S_SP_INSTANCE:
+			default:
+				adata->i2ssp_play_stream = substream;
+			}
+		} else {
 			rtd->i2s_instance = pinfo->cap_i2s_instance;
-	else
+			switch (rtd->i2s_instance) {
+			case I2S_BT_INSTANCE:
+				adata->capture_stream = substream;
+				break;
+			case I2S_SP_INSTANCE:
+			default:
+				adata->i2ssp_capture_stream = substream;
+			}
+		}
+	} else {
 		pr_err("pinfo failed\n");
-
+	}
 	size = params_buffer_bytes(params);
 	rtd->dma_addr = substream->dma_buffer.addr;
 	rtd->num_pages = (PAGE_ALIGN(size) >> PAGE_SHIFT);