diff mbox series

[v11,41/56] input: atmel_mxt_ts: export GPIO reset line via sysfs

Message ID 20200508055656.96389-42-jiada_wang@mentor.com (mailing list archive)
State New, archived
Headers show
Series atmel_mxt_ts misc | expand

Commit Message

Wang, Jiada May 8, 2020, 5:56 a.m. UTC
From: "George G. Davis" <george_davis@mentor.com>

N.B. Modifying the atmel_mxt_ts GPIO reset line during operation will
cause problems with normal driver operation.  This feature is provided
as a diagnostic debug aid.  It does not take into consideration any
pending operations which may be in progress.  Modifying the atmel_mxt_ts
GPIO reset line at any time will inevitably cause the driver to fail.

Signed-off-by: George G. Davis <george_davis@mentor.com>
Signed-off-by: Rajeev Kumar <rajeev_kumar@mentor.com>
Signed-off-by: Jiada Wang <jiada_wang@mentor.com>
---
 drivers/input/touchscreen/atmel_mxt_ts.c | 21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)
diff mbox series

Patch

diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index 75329f87927b..ceb14b4a8d4d 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -4080,6 +4080,19 @@  static int mxt_probe(struct i2c_client *client, const struct i2c_device_id *id)
 		return error;
 	}
 
+	if (data->reset_gpio) {
+		error = gpiod_export(data->reset_gpio, 0);
+		if (error)
+			return error;
+
+		error = gpiod_export_link(&client->dev, "reset",
+					  data->reset_gpio);
+		if (error) {
+			gpiod_unexport(data->reset_gpio);
+			return error;
+		}
+	}
+
 	if (data->suspend_mode == MXT_SUSPEND_REGULATOR) {
 		enable_irq(data->irq);
 
@@ -4110,6 +4123,10 @@  static int mxt_probe(struct i2c_client *client, const struct i2c_device_id *id)
 err_free_object:
 	mxt_free_input_device(data);
 	mxt_free_object_table(data);
+	if (data->reset_gpio) {
+		sysfs_remove_link(&client->dev.kobj, "reset");
+		gpiod_unexport(data->reset_gpio);
+	}
 	return error;
 }
 
@@ -4119,6 +4136,10 @@  static int mxt_remove(struct i2c_client *client)
 
 	disable_irq(data->irq);
 	sysfs_remove_group(&client->dev.kobj, &mxt_fw_attr_group);
+	if (data->reset_gpio) {
+		sysfs_remove_link(&client->dev.kobj, "reset");
+		gpiod_unexport(data->reset_gpio);
+	}
 	mxt_debug_msg_remove(data);
 	mxt_sysfs_remove(data);
 	mxt_free_input_device(data);