From patchwork Mon May 11 13:51:30 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Danil Kipnis X-Patchwork-Id: 11540891 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 7CFF5913 for ; Mon, 11 May 2020 13:53:43 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 5B217207FF for ; Mon, 11 May 2020 13:53:43 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (2048-bit key) header.d=cloud.ionos.com header.i=@cloud.ionos.com header.b="JHy/gUKf" Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1730285AbgEKNxl (ORCPT ); Mon, 11 May 2020 09:53:41 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:33916 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-FAIL-OK-FAIL) by vger.kernel.org with ESMTP id S1730287AbgEKNxk (ORCPT ); Mon, 11 May 2020 09:53:40 -0400 Received: from mail-wr1-x442.google.com (mail-wr1-x442.google.com [IPv6:2a00:1450:4864:20::442]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 01A37C05BD0B for ; Mon, 11 May 2020 06:53:39 -0700 (PDT) Received: by mail-wr1-x442.google.com with SMTP id x17so11092737wrt.5 for ; Mon, 11 May 2020 06:53:38 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=cloud.ionos.com; s=google; h=from:to:cc:subject:date:message-id:in-reply-to:references :mime-version:content-transfer-encoding; bh=CApeDRpcs9y+uCevURcB1yZFuinPxngxdJkSfuMz9fI=; b=JHy/gUKfg1p4f3bY5ru2S7ahjDr3JutKZnHuaZo0vLhGaXdw0HzTcZQWW+fvz2rrCh a9Mc2RJMmU1T5j150QJLsDDoEApnm8jFNM3aZ0q7DEM0/DtHaOWBCdLOE7Srf4G0wRUs Fm1+ITt+6oXdaJxqNERW0mviLw65OYvZvhExq1qGncC/X+wtDJ4/e31zERVygB7hlbgk kpdXy3oEUPferu284FrcDDhffCQaRpZzgwGNsGqnAaDNtyfizyNyn/kcv6mEQ9cD54q/ s3Jxkb4lEzjett3YeVFSkVOxwAmQ57wspa2mRt7Z+9F4uz4hMy3G+wPvGYjiqgmV7Kc5 gHUA== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references:mime-version:content-transfer-encoding; bh=CApeDRpcs9y+uCevURcB1yZFuinPxngxdJkSfuMz9fI=; b=ASFd5O8f9zjE70HbpU1Vd2X33UXYVPQVExT2mP/jDrVIaVuzhLTFuSpFA/iTEkvkiO iOroLKJvxUobcuAgHofwYFwVohWxwSrnufy+KQqidrUbOlcNSfp01RhvdsBoyLWgDpmA rFdW6w2d5WM4L4QKpBgr6ftIJEyBTMTBe1cMgllZZVvLxrOBqCx7Cd53Y0s4zYoMLHy7 2WGQi9s/f13G7t/SgnO5fod4oOu46Qa/R+m8CJAM4ROlkd/8yIHehvVIapT22o90m3oV PYDFC7VzSC6sP6MieleZ6iEy+m2btnqXW/Y3jJnQ3QUBi+xgyS13IHDlOZfeZC8J6XaT Zqkg== X-Gm-Message-State: AGi0PuaEXfVzIe19KshaqvONHNsEUh1Di4pS6BpZ1WjGi6facCkMf+8x +PoK8MhOQllLIXkZ5UCM5f+8u3UGYOxpZa0= X-Google-Smtp-Source: APiQypLq0/iTieJihfePA7+4sK2uqFWVHw8wzzExvn1tVie84qlnLQvBkjyuvGnq4ZUrbq1eol3EpA== X-Received: by 2002:a5d:51c9:: with SMTP id n9mr18818254wrv.84.1589205217185; Mon, 11 May 2020 06:53:37 -0700 (PDT) Received: from dkxps.local (dslb-002-204-227-207.002.204.pools.vodafone-ip.de. [2.204.227.207]) by smtp.gmail.com with ESMTPSA id v205sm9220018wmg.11.2020.05.11.06.53.36 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Mon, 11 May 2020 06:53:36 -0700 (PDT) From: Danil Kipnis To: linux-block@vger.kernel.org, linux-rdma@vger.kernel.org Cc: axboe@kernel.dk, hch@infradead.org, sagi@grimberg.me, bvanassche@acm.org, leon@kernel.org, dledford@redhat.com, jgg@ziepe.ca, danil.kipnis@cloud.ionos.com, jinpu.wang@cloud.ionos.com, pankaj.gupta@cloud.ionos.com, linux-kernel@vger.kernel.org Subject: [PATCH v15 24/25] block/rnbd: a bit of documentation Date: Mon, 11 May 2020 15:51:30 +0200 Message-Id: <20200511135131.27580-25-danil.kipnis@cloud.ionos.com> X-Mailer: git-send-email 2.20.1 In-Reply-To: <20200511135131.27580-1-danil.kipnis@cloud.ionos.com> References: <20200511135131.27580-1-danil.kipnis@cloud.ionos.com> MIME-Version: 1.0 Sender: linux-block-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-block@vger.kernel.org From: Jack Wang README with description of major sysfs entries, sysfs documentation are moved to ABI dir as Bart suggested. Signed-off-by: Danil Kipnis Signed-off-by: Jack Wang Cc: linux-kernel@vger.kernel.org Reviewed-by: Bart Van Assche --- Documentation/ABI/testing/sysfs-block-rnbd | 46 ++++++++ .../ABI/testing/sysfs-class-rnbd-client | 111 ++++++++++++++++++ .../ABI/testing/sysfs-class-rnbd-server | 50 ++++++++ drivers/block/rnbd/README | 92 +++++++++++++++ 4 files changed, 299 insertions(+) create mode 100644 Documentation/ABI/testing/sysfs-block-rnbd create mode 100644 Documentation/ABI/testing/sysfs-class-rnbd-client create mode 100644 Documentation/ABI/testing/sysfs-class-rnbd-server create mode 100644 drivers/block/rnbd/README diff --git a/Documentation/ABI/testing/sysfs-block-rnbd b/Documentation/ABI/testing/sysfs-block-rnbd new file mode 100644 index 000000000000..8f070b47f361 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-block-rnbd @@ -0,0 +1,46 @@ +What: /sys/block/rnbd/rnbd/unmap_device +Date: Feb 2020 +KernelVersion: 5.7 +Contact: Jack Wang Danil Kipnis +Description: To unmap a volume, "normal" or "force" has to be written to: + /sys/block/rnbd/rnbd/unmap_device + + When "normal" is used, the operation will fail with EBUSY if any process + is using the device. When "force" is used, the device is also unmapped + when device is in use. All I/Os that are in progress will fail. + + Example: + + # echo "normal" > /sys/block/rnbd0/rnbd/unmap_device + +What: /sys/block/rnbd/rnbd/state +Date: Feb 2020 +KernelVersion: 5.7 +Contact: Jack Wang Danil Kipnis +Description: The file contains the current state of the block device. The state file + returns "open" when the device is successfully mapped from the server + and accepting I/O requests. When the connection to the server gets + disconnected in case of an error (e.g. link failure), the state file + returns "closed" and all I/O requests submitted to it will fail with -EIO. + +What: /sys/block/rnbd/rnbd/session +Date: Feb 2020 +KernelVersion: 5.7 +Contact: Jack Wang Danil Kipnis +Description: RNBD uses RTRS session to transport the data between client and + server. The entry "session" contains the name of the session, that + was used to establish the RTRS session. It's the same name that + was passed as server parameter to the map_device entry. + +What: /sys/block/rnbd/rnbd/mapping_path +Date: Feb 2020 +KernelVersion: 5.7 +Contact: Jack Wang Danil Kipnis +Description: Contains the path that was passed as "device_path" to the map_device + operation. + +What: /sys/block/rnbd/rnbd/access_mode +Date: Feb 2020 +KernelVersion: 5.7 +Contact: Jack Wang Danil Kipnis +Description: Contains the device access mode: ro, rw or migration. diff --git a/Documentation/ABI/testing/sysfs-class-rnbd-client b/Documentation/ABI/testing/sysfs-class-rnbd-client new file mode 100644 index 000000000000..c084f203b41e --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-rnbd-client @@ -0,0 +1,111 @@ +What: /sys/class/rnbd-client +Date: Feb 2020 +KernelVersion: 5.7 +Contact: Jack Wang Danil Kipnis +Description: Provide information about RNBD-client. + All sysfs files that are not read-only provide the usage information on read: + + Example: + # cat /sys/class/rnbd-client/ctl/map_device + + > Usage: echo "sessname= path=<[srcaddr,]dstaddr> + > [path=<[srcaddr,]dstaddr>] device_path= + > [access_mode=] > map_device + > + > addr ::= [ ip: | ip: | gid: ] + +What: /sys/class/rnbd-client/ctl/map_device +Date: Feb 2020 +KernelVersion: 5.7 +Contact: Jack Wang Danil Kipnis +Description: Expected format is the following: + + sessname= + path=<[srcaddr,]dstaddr> [path=<[srcaddr,]dstaddr> ...] + device_path= + [access_mode=] + + Where: + + sessname: accepts a string not bigger than 256 chars, which identifies + a given session on the client and on the server. + I.e. "clt_hostname-srv_hostname" could be a natural choice. + + path: describes a connection between the client and the server by + specifying destination and, when required, the source address. + The addresses are to be provided in the following format: + + ip: + ip: + gid: + + for example: + + path=ip:10.0.0.66 + The single addr is treated as the destination. + The connection will be established to this server from any client IP address. + + path=ip:10.0.0.66,ip:10.0.1.66 + First addr is the source address and the second is the destination. + + If multiple "path=" options are specified multiple connection + will be established and data will be sent according to + the selected multipath policy (see RTRS mp_policy sysfs entry description). + + device_path: Path to the block device on the server side. Path is specified + relative to the directory on server side configured in the + 'dev_search_path' module parameter of the rnbd_server. + The rnbd_server prepends the received from client + with and tries to open the + / block device. On success, + a /dev/rnbd device file, a /sys/block/rnbd_client/rnbd/ + directory and an entry in /sys/class/rnbd-client/ctl/devices + will be created. + + If 'dev_search_path' contains '%SESSNAME%', then each session can + have different devices namespace, e.g. server was configured with + the following parameter "dev_search_path=/run/rnbd-devs/%SESSNAME%", + client has this string "sessname=blya device_path=sda", then server + will try to open: /run/rnbd-devs/blya/sda. + + access_mode: the access_mode parameter specifies if the device is to be + mapped as "ro" read-only or "rw" read-write. The server allows + a device to be exported in rw mode only once. The "migration" + access mode has to be specified if a second mapping in read-write + mode is desired. + + By default "rw" is used. + + Exit Codes: + + If the device is already mapped it will fail with EEXIST. If the input + has an invalid format it will return EINVAL. If the device path cannot + be found on the server, it will fail with ENOENT. + + Finding device file after mapping + --------------------------------- + + After mapping, the device file can be found by: + o The symlink /sys/class/rnbd-client/ctl/devices/ + points to /sys/block/. The last part of the symlink destination + is the same as the device name. By extracting the last part of the + path the path to the device /dev/ can be build. + + o /dev/block/$(cat /sys/class/rnbd-client/ctl/devices//dev) + + How to find the of the device is described on the next + section. + +What: /sys/class/rnbd-client/ctl/devices/ +Date: Feb 2020 +KernelVersion: 5.7 +Contact: Jack Wang Danil Kipnis +Description: For each device mapped on the client a new symbolic link is created as + /sys/class/rnbd-client/ctl/devices/, which points + to the block device created by rnbd (/sys/block/rnbd/). + The of each device is created as follows: + + - If the 'device_path' provided during mapping contains slashes ("/"), + they are replaced by exclamation mark ("!") and used as as the + . Otherwise, the will be the same as the + "device_path" provided. diff --git a/Documentation/ABI/testing/sysfs-class-rnbd-server b/Documentation/ABI/testing/sysfs-class-rnbd-server new file mode 100644 index 000000000000..ba60a90c0e45 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-rnbd-server @@ -0,0 +1,50 @@ +What: /sys/class/rnbd-server +Date: Feb 2020 +KernelVersion: 5.7 +Contact: Jack Wang Danil Kipnis +Description: provide information about RNBD-server. + +What: /sys/class/rnbd-server/ctl/ +Date: Feb 2020 +KernelVersion: 5.7 +Contact: Jack Wang Danil Kipnis +Description: When a client maps a device, a directory entry with the name of the + block device is created under /sys/class/rnbd-server/ctl/devices/. + +What: /sys/class/rnbd-server/ctl/devices//block_dev +Date: Feb 2020 +KernelVersion: 5.7 +Contact: Jack Wang Danil Kipnis +Description: Is a symlink to the sysfs entry of the exported device. + + Example: + block_dev -> ../../../../class/block/ram0 + +What: /sys/class/rnbd-server/ctl/devices//sessions/ +Date: Feb 2020 +KernelVersion: 5.7 +Contact: Jack Wang Danil Kipnis +Description: For each client a particular device is exported to, following directory will be + created: + + /sys/class/rnbd-server/ctl/devices//sessions// + + When the device is unmapped by that client, the directory will be removed. + +What: /sys/class/rnbd-server/ctl/devices//sessions//read_only +Date: Feb 2020 +KernelVersion: 5.7 +Contact: Jack Wang Danil Kipnis +Description: Contains '1' if device is mapped read-only, otherwise '0'. + +What: /sys/class/rnbd-server/ctl/devices//sessions//mapping_path +Date: Feb 2020 +KernelVersion: 5.7 +Contact: Jack Wang Danil Kipnis +Description: Contains the relative device path provided by the user during mapping. + +What: /sys/class/rnbd-server/ctl/devices//sessions//access_mode +Date: Feb 2020 +KernelVersion: 5.7 +Contact: Jack Wang Danil Kipnis +Description: Contains the device access mode: ro, rw or migration. diff --git a/drivers/block/rnbd/README b/drivers/block/rnbd/README new file mode 100644 index 000000000000..1773c0aa0bd4 --- /dev/null +++ b/drivers/block/rnbd/README @@ -0,0 +1,92 @@ +******************************** +RDMA Network Block Device (RNBD) +******************************** + +Introduction +------------ + +RNBD (RDMA Network Block Device) is a pair of kernel modules +(client and server) that allow for remote access of a block device on +the server over RTRS protocol using the RDMA (InfiniBand, RoCE, iWARP) +transport. After being mapped, the remote block devices can be accessed +on the client side as local block devices. + +I/O is transferred between client and server by the RTRS transport +modules. The administration of RNBD and RTRS modules is done via +sysfs entries. + +Requirements +------------ + + RTRS kernel modules + +Quick Start +----------- + +Server side: + # modprobe rnbd_server + +Client side: + # modprobe rnbd_client + # echo "sessname=blya path=ip:10.50.100.66 device_path=/dev/ram0" > \ + /sys/devices/virtual/rnbd-client/ctl/map_device + + Where "sessname=" is a session name, a string to identify the session + on client and on server sides; "path=" is a destination IP address or + a pair of a source and a destination IPs, separated by comma. Multiple + "path=" options can be specified in order to use multipath (see RTRS + description for details); "device_path=" is the block device to be + mapped from the server side. After the session to the server machine is + established, the mapped device will appear on the client side under + /dev/rnbd. + + +RNBD-Server Module Parameters +============================= + +dev_search_path +--------------- + +When a device is mapped from the client, the server generates the path +to the block device on the server side by concatenating dev_search_path +and the "device_path" that was specified in the map_device operation. + +The default dev_search_path is: "/". + +dev_search_path option can also contain %SESSNAME% in order to provide +different device namespaces for different sessions. See "device_path" +option for details. + +============================ +Protocol (rnbd/rnbd-proto.h) +============================ + +1. Before mapping first device from a given server, client sends an +RNBD_MSG_SESS_INFO to the server. Server responds with +RNBD_MSG_SESS_INFO_RSP. Currently the messages only contain the protocol +version for backward compatibility. + +2. Client requests to open a device by sending RNBD_MSG_OPEN message. This +contains the path to the device and access mode (read-only or writable). +Server responds to the message with RNBD_MSG_OPEN_RSP. This contains +a 32 bit device id to be used for IOs and device "geometry" related +information: side, max_hw_sectors, etc. + +3. Client attaches RNBD_MSG_IO to each IO message send to a device. This +message contains device id, provided by server in his rnbd_msg_open_rsp, +sector to be accessed, read-write flags and bi_size. + +4. Client closes a device by sending RNBD_MSG_CLOSE which contains only the +device id provided by the server. + +========================================= +Contributors List(in alphabetical order) +========================================= +Danil Kipnis +Fabian Holler +Guoqing Jiang +Jack Wang +Kleber Souza +Lutz Pogrell +Milind Dumbare +Roman Penyaev