| Message ID | 20200519065512.232760-1-ddouwsma@redhat.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | xfstests: add test for xfs_repair progress reporting | expand |
On Tue, May 19, 2020 at 04:55:12PM +1000, Donald Douwsma wrote: > xfs_repair's interval based progress has been broken for > some time, create a test based on dmdelay to stretch out > the time and use ag_stride to force parallelism. > > Signed-off-by: Donald Douwsma <ddouwsma@redhat.com> > --- > tests/xfs/516 | 72 +++++++++++++++++++++++++++++++++++++++++++++++ > tests/xfs/516.out | 15 ++++++++++ > tests/xfs/group | 1 + > 3 files changed, 88 insertions(+) > create mode 100755 tests/xfs/516 > create mode 100644 tests/xfs/516.out > > diff --git a/tests/xfs/516 b/tests/xfs/516 > new file mode 100755 > index 00000000..5ad57fbc > --- /dev/null > +++ b/tests/xfs/516 > @@ -0,0 +1,72 @@ > +#! /bin/bash > +# SPDX-License-Identifier: GPL-2.0 > +# Copyright (c) 2020 Red Hat, Inc. All Rights Reserved. > +# > +# FS QA Test 516 > +# > +# Test xfs_repair's progress reporting > +# > +seq=`basename $0` > +seqres=$RESULT_DIR/$seq > +echo "QA output created by $seq" > + > +here=`pwd` > +tmp=/tmp/$$ > +status=1 # failure is the default! > +trap "_cleanup; exit \$status" 0 1 2 3 15 > + > +_cleanup() > +{ > + cd / > + _dmsetup_remove delay-test > /dev/null 2>&1 > +} > + > +# get standard environment, filters and checks > +. ./common/rc > +. ./common/filter > +. ./common/dmdelay > +. ./common/populate > + > +# remove previous $seqres.full before test > +rm -f $seqres.full > + > +# real QA test starts here > + > +# Modify as appropriate. > +_supported_fs xfs > +_supported_os Linux > +_require_scratch > +_require_dm_target delay > + > +# Filter output specific to the formatters in xfs_repair/progress.c > +# Ideally we'd like to see hits on anything that matches > +# awk '/{FMT/' repair/progress.c > +_filter_repair() > +{ > + sed -ne ' > + s/[0-9]\+/#/g; > + /#:#:#:/p > + ' > +} > + > +echo "Format and populate" > +_scratch_populate_cached nofill > $seqres.full 2>&1 > + > +echo "Introduce a dmdelay" > +_init_delay > + > +# Introduce a read I/O delay > +# The default in common/dmdelay is a bit too agressive > +BLK_DEV_SIZE=`blockdev --getsz $SCRATCH_DEV` > +DELAY_TABLE_RDELAY="0 $BLK_DEV_SIZE delay $SCRATCH_DEV 0 100 $SCRATCH_DEV 0 0" > +_load_delay_table $DELAY_READ > + > +echo "Run repair" > +$XFS_REPAIR_PROG -o ag_stride=4 -t 1 $DELAY_DEV >> $seqres.full 2>&1 Hmm... if the scratch device had an external log device, this raw invocation of repair won't run because it won't have the log parameter. Normally I'd say just use _scratch_xfs_repair here, but since there's a delay device involved, things get trickier... ...or maybe they don't? SCRATCH_DEV=$DELAY_DEV _scratch_xfs_repair -o ag_stride... might work, seeing as we do that in a few places... > +cat $seqres.full | _filter_repair | sort -u You also might want to redirect the repair output to a separate file so that you can filter and sort /only/ the repair output in the process of logging the repair results to stdout and $seqres.full. --D > + > +_cleanup_delay > + > +# success, all done > +status=0 > +exit > diff --git a/tests/xfs/516.out b/tests/xfs/516.out > new file mode 100644 > index 00000000..bc824d7f > --- /dev/null > +++ b/tests/xfs/516.out > @@ -0,0 +1,15 @@ > +QA output created by 516 > +Format and populate > +Introduce a dmdelay > +Run repair > + - #:#:#: Phase #: #% done - estimated remaining time # minutes, # seconds > + - #:#:#: Phase #: elapsed time # second - processed # inodes per minute > + - #:#:#: Phase #: elapsed time # seconds - processed # inodes per minute > + - #:#:#: check for inodes claiming duplicate blocks - # of # inodes done > + - #:#:#: process known inodes and inode discovery - # of # inodes done > + - #:#:#: process newly discovered inodes - # of # allocation groups done > + - #:#:#: rebuild AG headers and trees - # of # allocation groups done > + - #:#:#: scanning agi unlinked lists - # of # allocation groups done > + - #:#:#: scanning filesystem freespace - # of # allocation groups done > + - #:#:#: setting up duplicate extent list - # of # allocation groups done > + - #:#:#: verify and correct link counts - # of # allocation groups done > diff --git a/tests/xfs/group b/tests/xfs/group > index 12eb55c9..aeeca23f 100644 > --- a/tests/xfs/group > +++ b/tests/xfs/group > @@ -513,3 +513,4 @@ > 513 auto mount > 514 auto quick db > 515 auto quick quota > +516 repair > -- > 2.18.4 >
On 20/05/2020 02:01, Darrick J. Wong wrote: > On Tue, May 19, 2020 at 04:55:12PM +1000, Donald Douwsma wrote: >> xfs_repair's interval based progress has been broken for >> some time, create a test based on dmdelay to stretch out >> the time and use ag_stride to force parallelism. >> >> Signed-off-by: Donald Douwsma <ddouwsma@redhat.com> >> --- >> tests/xfs/516 | 72 +++++++++++++++++++++++++++++++++++++++++++++++ >> tests/xfs/516.out | 15 ++++++++++ >> tests/xfs/group | 1 + >> 3 files changed, 88 insertions(+) >> create mode 100755 tests/xfs/516 >> create mode 100644 tests/xfs/516.out >> >> diff --git a/tests/xfs/516 b/tests/xfs/516 >> new file mode 100755 >> index 00000000..5ad57fbc >> --- /dev/null >> +++ b/tests/xfs/516 >> @@ -0,0 +1,72 @@ >> +#! /bin/bash >> +# SPDX-License-Identifier: GPL-2.0 >> +# Copyright (c) 2020 Red Hat, Inc. All Rights Reserved. >> +# >> +# FS QA Test 516 >> +# >> +# Test xfs_repair's progress reporting >> +# >> +seq=`basename $0` >> +seqres=$RESULT_DIR/$seq >> +echo "QA output created by $seq" >> + >> +here=`pwd` >> +tmp=/tmp/$$ >> +status=1 # failure is the default! >> +trap "_cleanup; exit \$status" 0 1 2 3 15 >> + >> +_cleanup() >> +{ >> + cd / >> + _dmsetup_remove delay-test > /dev/null 2>&1 >> +} >> + >> +# get standard environment, filters and checks >> +. ./common/rc >> +. ./common/filter >> +. ./common/dmdelay >> +. ./common/populate >> + >> +# remove previous $seqres.full before test >> +rm -f $seqres.full >> + >> +# real QA test starts here >> + >> +# Modify as appropriate. >> +_supported_fs xfs >> +_supported_os Linux >> +_require_scratch >> +_require_dm_target delay >> + >> +# Filter output specific to the formatters in xfs_repair/progress.c >> +# Ideally we'd like to see hits on anything that matches >> +# awk '/{FMT/' repair/progress.c >> +_filter_repair() >> +{ >> + sed -ne ' >> + s/[0-9]\+/#/g; >> + /#:#:#:/p >> + ' >> +} >> + >> +echo "Format and populate" >> +_scratch_populate_cached nofill > $seqres.full 2>&1 >> + >> +echo "Introduce a dmdelay" >> +_init_delay >> + >> +# Introduce a read I/O delay >> +# The default in common/dmdelay is a bit too agressive >> +BLK_DEV_SIZE=`blockdev --getsz $SCRATCH_DEV` >> +DELAY_TABLE_RDELAY="0 $BLK_DEV_SIZE delay $SCRATCH_DEV 0 100 $SCRATCH_DEV 0 0" >> +_load_delay_table $DELAY_READ >> + >> +echo "Run repair" >> +$XFS_REPAIR_PROG -o ag_stride=4 -t 1 $DELAY_DEV >> $seqres.full 2>&1 > > Hmm... if the scratch device had an external log device, this raw > invocation of repair won't run because it won't have the log parameter. > Normally I'd say just use _scratch_xfs_repair here, but since there's a > delay device involved, things get trickier... > > ...or maybe they don't? > > SCRATCH_DEV=$DELAY_DEV _scratch_xfs_repair -o ag_stride... > > might work, seeing as we do that in a few places... > Thanks, that works a treat! >> +cat $seqres.full | _filter_repair | sort -u > > You also might want to redirect the repair output to a separate file so > that you can filter and sort /only/ the repair output in the process of > logging the repair results to stdout and $seqres.full. *nod*, that would be much clearer. Cheers, Don > --D > >> + >> +_cleanup_delay >> + >> +# success, all done >> +status=0 >> +exit >> diff --git a/tests/xfs/516.out b/tests/xfs/516.out >> new file mode 100644 >> index 00000000..bc824d7f >> --- /dev/null >> +++ b/tests/xfs/516.out >> @@ -0,0 +1,15 @@ >> +QA output created by 516 >> +Format and populate >> +Introduce a dmdelay >> +Run repair >> + - #:#:#: Phase #: #% done - estimated remaining time # minutes, # seconds >> + - #:#:#: Phase #: elapsed time # second - processed # inodes per minute >> + - #:#:#: Phase #: elapsed time # seconds - processed # inodes per minute >> + - #:#:#: check for inodes claiming duplicate blocks - # of # inodes done >> + - #:#:#: process known inodes and inode discovery - # of # inodes done >> + - #:#:#: process newly discovered inodes - # of # allocation groups done >> + - #:#:#: rebuild AG headers and trees - # of # allocation groups done >> + - #:#:#: scanning agi unlinked lists - # of # allocation groups done >> + - #:#:#: scanning filesystem freespace - # of # allocation groups done >> + - #:#:#: setting up duplicate extent list - # of # allocation groups done >> + - #:#:#: verify and correct link counts - # of # allocation groups done >> diff --git a/tests/xfs/group b/tests/xfs/group >> index 12eb55c9..aeeca23f 100644 >> --- a/tests/xfs/group >> +++ b/tests/xfs/group >> @@ -513,3 +513,4 @@ >> 513 auto mount >> 514 auto quick db >> 515 auto quick quota >> +516 repair >> -- >> 2.18.4 >> >
diff --git a/tests/xfs/516 b/tests/xfs/516 new file mode 100755 index 00000000..5ad57fbc --- /dev/null +++ b/tests/xfs/516 @@ -0,0 +1,72 @@ +#! /bin/bash +# SPDX-License-Identifier: GPL-2.0 +# Copyright (c) 2020 Red Hat, Inc. All Rights Reserved. +# +# FS QA Test 516 +# +# Test xfs_repair's progress reporting +# +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 15 + +_cleanup() +{ + cd / + _dmsetup_remove delay-test > /dev/null 2>&1 +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter +. ./common/dmdelay +. ./common/populate + +# remove previous $seqres.full before test +rm -f $seqres.full + +# real QA test starts here + +# Modify as appropriate. +_supported_fs xfs +_supported_os Linux +_require_scratch +_require_dm_target delay + +# Filter output specific to the formatters in xfs_repair/progress.c +# Ideally we'd like to see hits on anything that matches +# awk '/{FMT/' repair/progress.c +_filter_repair() +{ + sed -ne ' + s/[0-9]\+/#/g; + /#:#:#:/p + ' +} + +echo "Format and populate" +_scratch_populate_cached nofill > $seqres.full 2>&1 + +echo "Introduce a dmdelay" +_init_delay + +# Introduce a read I/O delay +# The default in common/dmdelay is a bit too agressive +BLK_DEV_SIZE=`blockdev --getsz $SCRATCH_DEV` +DELAY_TABLE_RDELAY="0 $BLK_DEV_SIZE delay $SCRATCH_DEV 0 100 $SCRATCH_DEV 0 0" +_load_delay_table $DELAY_READ + +echo "Run repair" +$XFS_REPAIR_PROG -o ag_stride=4 -t 1 $DELAY_DEV >> $seqres.full 2>&1 +cat $seqres.full | _filter_repair | sort -u + +_cleanup_delay + +# success, all done +status=0 +exit diff --git a/tests/xfs/516.out b/tests/xfs/516.out new file mode 100644 index 00000000..bc824d7f --- /dev/null +++ b/tests/xfs/516.out @@ -0,0 +1,15 @@ +QA output created by 516 +Format and populate +Introduce a dmdelay +Run repair + - #:#:#: Phase #: #% done - estimated remaining time # minutes, # seconds + - #:#:#: Phase #: elapsed time # second - processed # inodes per minute + - #:#:#: Phase #: elapsed time # seconds - processed # inodes per minute + - #:#:#: check for inodes claiming duplicate blocks - # of # inodes done + - #:#:#: process known inodes and inode discovery - # of # inodes done + - #:#:#: process newly discovered inodes - # of # allocation groups done + - #:#:#: rebuild AG headers and trees - # of # allocation groups done + - #:#:#: scanning agi unlinked lists - # of # allocation groups done + - #:#:#: scanning filesystem freespace - # of # allocation groups done + - #:#:#: setting up duplicate extent list - # of # allocation groups done + - #:#:#: verify and correct link counts - # of # allocation groups done diff --git a/tests/xfs/group b/tests/xfs/group index 12eb55c9..aeeca23f 100644 --- a/tests/xfs/group +++ b/tests/xfs/group @@ -513,3 +513,4 @@ 513 auto mount 514 auto quick db 515 auto quick quota +516 repair
xfs_repair's interval based progress has been broken for some time, create a test based on dmdelay to stretch out the time and use ag_stride to force parallelism. Signed-off-by: Donald Douwsma <ddouwsma@redhat.com> --- tests/xfs/516 | 72 +++++++++++++++++++++++++++++++++++++++++++++++ tests/xfs/516.out | 15 ++++++++++ tests/xfs/group | 1 + 3 files changed, 88 insertions(+) create mode 100755 tests/xfs/516 create mode 100644 tests/xfs/516.out