diff mbox series

[v15,07/11] soc: mediatek: Add extra sram control

Message ID 1590051985-29149-8-git-send-email-weiyi.lu@mediatek.com (mailing list archive)
State New, archived
Headers show
Series Mediatek MT8183 scpsys support | expand

Commit Message

Weiyi Lu May 21, 2020, 9:06 a.m. UTC
For some power domains like vpu_core on MT8183 whose sram need to
do clock and internal isolation while power on/off sram.
We add a cap "MTK_SCPD_SRAM_ISO" to judge if we need to do
the extra sram isolation control or not.

Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
Reviewed-by: Nicolas Boichat <drinkcat@chromium.org>
---
 drivers/soc/mediatek/mtk-scpsys.c | 22 ++++++++++++++++++++--
 1 file changed, 20 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/drivers/soc/mediatek/mtk-scpsys.c b/drivers/soc/mediatek/mtk-scpsys.c
index ef2c668..ef46e31 100644
--- a/drivers/soc/mediatek/mtk-scpsys.c
+++ b/drivers/soc/mediatek/mtk-scpsys.c
@@ -25,6 +25,7 @@ 
 
 #define MTK_SCPD_ACTIVE_WAKEUP		BIT(0)
 #define MTK_SCPD_FWAIT_SRAM		BIT(1)
+#define MTK_SCPD_SRAM_ISO		BIT(2)
 #define MTK_SCPD_CAPS(_scpd, _x)	((_scpd)->data->caps & (_x))
 
 #define SPM_VDE_PWR_CON			0x0210
@@ -56,6 +57,8 @@ 
 #define PWR_ON_BIT			BIT(2)
 #define PWR_ON_2ND_BIT			BIT(3)
 #define PWR_CLK_DIS_BIT			BIT(4)
+#define PWR_SRAM_CLKISO_BIT		BIT(5)
+#define PWR_SRAM_ISOINT_B_BIT		BIT(6)
 
 #define PWR_STATUS_CONN			BIT(1)
 #define PWR_STATUS_DISP			BIT(3)
@@ -290,6 +293,14 @@  static int scpsys_sram_enable(struct scp_domain *scpd, void __iomem *ctl_addr)
 			return ret;
 	}
 
+	if (MTK_SCPD_CAPS(scpd, MTK_SCPD_SRAM_ISO))	{
+		val = readl(ctl_addr) | PWR_SRAM_ISOINT_B_BIT;
+		writel(val, ctl_addr);
+		udelay(1);
+		val &= ~PWR_SRAM_CLKISO_BIT;
+		writel(val, ctl_addr);
+	}
+
 	return 0;
 }
 
@@ -299,8 +310,15 @@  static int scpsys_sram_disable(struct scp_domain *scpd, void __iomem *ctl_addr)
 	u32 pdn_ack = scpd->data->sram_pdn_ack_bits;
 	int tmp;
 
-	val = readl(ctl_addr);
-	val |= scpd->data->sram_pdn_bits;
+	if (MTK_SCPD_CAPS(scpd, MTK_SCPD_SRAM_ISO))	{
+		val = readl(ctl_addr) | PWR_SRAM_CLKISO_BIT;
+		writel(val, ctl_addr);
+		val &= ~PWR_SRAM_ISOINT_B_BIT;
+		writel(val, ctl_addr);
+		udelay(1);
+	}
+
+	val = readl(ctl_addr) | scpd->data->sram_pdn_bits;
 	writel(val, ctl_addr);
 
 	/* Either wait until SRAM_PDN_ACK all 1 or 0 */