diff mbox series

[V5,4/5] iio: adc: Update debug prints

Message ID 1590157452-27179-5-git-send-email-jprakash@codeaurora.org (mailing list archive)
State New, archived
Headers show
Series [V5,1/5] iio: adc: Convert the QCOM SPMI ADC bindings to .yaml format | expand

Commit Message

Jishnu Prakash May 22, 2020, 2:24 p.m. UTC 
Change pr_err/pr_debug statements to dev_err/dev_dbg for
increased clarity.

Signed-off-by: Jishnu Prakash <jprakash@codeaurora.org>
---
 drivers/iio/adc/qcom-spmi-adc5.c | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

Comments

Andy Shevchenko May 22, 2020, 3:39 p.m. UTC | #1 
On Fri, May 22, 2020 at 5:25 PM Jishnu Prakash <jprakash@codeaurora.org> wrote:
>
> Change pr_err/pr_debug statements to dev_err/dev_dbg for
> increased clarity.
>

Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>

In the same way you should have patch with removal of ' < 0' parts.

> Signed-off-by: Jishnu Prakash <jprakash@codeaurora.org>
> ---
>  drivers/iio/adc/qcom-spmi-adc5.c | 18 +++++++++---------
>  1 file changed, 9 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/iio/adc/qcom-spmi-adc5.c b/drivers/iio/adc/qcom-spmi-adc5.c
> index e1482fd..11eb97c 100644
> --- a/drivers/iio/adc/qcom-spmi-adc5.c
> +++ b/drivers/iio/adc/qcom-spmi-adc5.c
> @@ -249,11 +249,11 @@ static int adc5_read_voltage_data(struct adc5_chip *adc, u16 *data)
>         *data = (rslt_msb << 8) | rslt_lsb;
>
>         if (*data == ADC5_USR_DATA_CHECK) {
> -               pr_err("Invalid data:0x%x\n", *data);
> +               dev_err(adc->dev, "Invalid data:0x%x\n", *data);
>                 return -EINVAL;
>         }
>
> -       pr_debug("voltage raw code:0x%x\n", *data);
> +       dev_dbg(adc->dev, "voltage raw code:0x%x\n", *data);
>
>         return 0;
>  }
> @@ -385,24 +385,24 @@ static int adc5_do_conversion(struct adc5_chip *adc,
>
>         ret = adc5_configure(adc, prop);
>         if (ret) {
> -               pr_err("ADC configure failed with %d\n", ret);
> +               dev_err(adc->dev, "ADC configure failed with %d\n", ret);
>                 goto unlock;
>         }
>
>         if (adc->poll_eoc) {
>                 ret = adc5_poll_wait_eoc(adc);
>                 if (ret) {
> -                       pr_err("EOC bit not set\n");
> +                       dev_err(adc->dev, "EOC bit not set\n");
>                         goto unlock;
>                 }
>         } else {
>                 ret = wait_for_completion_timeout(&adc->complete,
>                                                         ADC5_CONV_TIMEOUT);
>                 if (!ret) {
> -                       pr_debug("Did not get completion timeout.\n");
> +                       dev_dbg(adc->dev, "Did not get completion timeout.\n");
>                         ret = adc5_poll_wait_eoc(adc);
>                         if (ret) {
> -                               pr_err("EOC bit not set\n");
> +                               dev_err(adc->dev, "EOC bit not set\n");
>                                 goto unlock;
>                         }
>                 }
> @@ -724,7 +724,7 @@ static int adc5_get_dt_channel_data(struct adc5_chip *adc,
>         channel_name = of_get_property(node,
>                                 "label", NULL) ? : node->name;
>         if (!channel_name) {
> -               pr_err("Invalid channel name\n");
> +               dev_err(dev, "Invalid channel name\n");
>                 return -EINVAL;
>         }
>         prop->datasheet_name = channel_name;
> @@ -767,7 +767,7 @@ static int adc5_get_dt_channel_data(struct adc5_chip *adc,
>                         return ret;
>                 }
>
> -               pr_debug("dig_ver:minor:%d, major:%d\n", dig_version[0],
> +               dev_dbg(dev, "dig_ver:minor:%d, major:%d\n", dig_version[0],
>                                                 dig_version[1]);
>                 /* Digital controller >= 5.3 have hw_settle_2 option */
>                 if ((dig_version[0] >= ADC5_HW_SETTLE_DIFF_MINOR &&
> @@ -971,7 +971,7 @@ static int adc5_probe(struct platform_device *pdev)
>
>         ret = adc5_get_dt_data(adc, node);
>         if (ret) {
> -               pr_err("adc get dt data failed\n");
> +               dev_err(dev, "adc get dt data failed\n");
>                 return ret;
>         }
>
> --
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> a Linux Foundation Collaborative Project
>
diff mbox series

Patch

diff --git a/drivers/iio/adc/qcom-spmi-adc5.c b/drivers/iio/adc/qcom-spmi-adc5.c
index e1482fd..11eb97c 100644
--- a/drivers/iio/adc/qcom-spmi-adc5.c
+++ b/drivers/iio/adc/qcom-spmi-adc5.c
@@ -249,11 +249,11 @@  static int adc5_read_voltage_data(struct adc5_chip *adc, u16 *data)
 	*data = (rslt_msb << 8) | rslt_lsb;
 
 	if (*data == ADC5_USR_DATA_CHECK) {
-		pr_err("Invalid data:0x%x\n", *data);
+		dev_err(adc->dev, "Invalid data:0x%x\n", *data);
 		return -EINVAL;
 	}
 
-	pr_debug("voltage raw code:0x%x\n", *data);
+	dev_dbg(adc->dev, "voltage raw code:0x%x\n", *data);
 
 	return 0;
 }
@@ -385,24 +385,24 @@  static int adc5_do_conversion(struct adc5_chip *adc,
 
 	ret = adc5_configure(adc, prop);
 	if (ret) {
-		pr_err("ADC configure failed with %d\n", ret);
+		dev_err(adc->dev, "ADC configure failed with %d\n", ret);
 		goto unlock;
 	}
 
 	if (adc->poll_eoc) {
 		ret = adc5_poll_wait_eoc(adc);
 		if (ret) {
-			pr_err("EOC bit not set\n");
+			dev_err(adc->dev, "EOC bit not set\n");
 			goto unlock;
 		}
 	} else {
 		ret = wait_for_completion_timeout(&adc->complete,
 							ADC5_CONV_TIMEOUT);
 		if (!ret) {
-			pr_debug("Did not get completion timeout.\n");
+			dev_dbg(adc->dev, "Did not get completion timeout.\n");
 			ret = adc5_poll_wait_eoc(adc);
 			if (ret) {
-				pr_err("EOC bit not set\n");
+				dev_err(adc->dev, "EOC bit not set\n");
 				goto unlock;
 			}
 		}
@@ -724,7 +724,7 @@  static int adc5_get_dt_channel_data(struct adc5_chip *adc,
 	channel_name = of_get_property(node,
 				"label", NULL) ? : node->name;
 	if (!channel_name) {
-		pr_err("Invalid channel name\n");
+		dev_err(dev, "Invalid channel name\n");
 		return -EINVAL;
 	}
 	prop->datasheet_name = channel_name;
@@ -767,7 +767,7 @@  static int adc5_get_dt_channel_data(struct adc5_chip *adc,
 			return ret;
 		}
 
-		pr_debug("dig_ver:minor:%d, major:%d\n", dig_version[0],
+		dev_dbg(dev, "dig_ver:minor:%d, major:%d\n", dig_version[0],
 						dig_version[1]);
 		/* Digital controller >= 5.3 have hw_settle_2 option */
 		if ((dig_version[0] >= ADC5_HW_SETTLE_DIFF_MINOR &&
@@ -971,7 +971,7 @@  static int adc5_probe(struct platform_device *pdev)
 
 	ret = adc5_get_dt_data(adc, node);
 	if (ret) {
-		pr_err("adc get dt data failed\n");
+		dev_err(dev, "adc get dt data failed\n");
 		return ret;
 	}