Message ID | 20200527105659.142560-1-eugen.hristev@microchip.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Series | mmc: sdhci-of-at91: fix CALCR register being rewritten | expand |
On Wed, 27 May 2020 at 12:57, Eugen Hristev <eugen.hristev@microchip.com> wrote: > > When enabling calibration at reset, the CALCR register was completely > rewritten. This may cause certain bits being deleted unintentedly. > Fix by issuing a read-modify-write operation. > > Fixes: 727d836a375a ("mmc: sdhci-of-at91: add DT property to enable calibration on full reset") > Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Applied for next and by adding a stable tag, thanks! Kind regards Uffe > --- > drivers/mmc/host/sdhci-of-at91.c | 7 +++++-- > 1 file changed, 5 insertions(+), 2 deletions(-) > > diff --git a/drivers/mmc/host/sdhci-of-at91.c b/drivers/mmc/host/sdhci-of-at91.c > index 25f4e0f4f53b..1ece2c50042c 100644 > --- a/drivers/mmc/host/sdhci-of-at91.c > +++ b/drivers/mmc/host/sdhci-of-at91.c > @@ -121,9 +121,12 @@ static void sdhci_at91_reset(struct sdhci_host *host, u8 mask) > || mmc_gpio_get_cd(host->mmc) >= 0) > sdhci_at91_set_force_card_detect(host); > > - if (priv->cal_always_on && (mask & SDHCI_RESET_ALL)) > - sdhci_writel(host, SDMMC_CALCR_ALWYSON | SDMMC_CALCR_EN, > + if (priv->cal_always_on && (mask & SDHCI_RESET_ALL)) { > + u32 calcr = sdhci_readl(host, SDMMC_CALCR); > + > + sdhci_writel(host, calcr | SDMMC_CALCR_ALWYSON | SDMMC_CALCR_EN, > SDMMC_CALCR); > + } > } > > static const struct sdhci_ops sdhci_at91_sama5d2_ops = { > -- > 2.25.1 >
diff --git a/drivers/mmc/host/sdhci-of-at91.c b/drivers/mmc/host/sdhci-of-at91.c index 25f4e0f4f53b..1ece2c50042c 100644 --- a/drivers/mmc/host/sdhci-of-at91.c +++ b/drivers/mmc/host/sdhci-of-at91.c @@ -121,9 +121,12 @@ static void sdhci_at91_reset(struct sdhci_host *host, u8 mask) || mmc_gpio_get_cd(host->mmc) >= 0) sdhci_at91_set_force_card_detect(host); - if (priv->cal_always_on && (mask & SDHCI_RESET_ALL)) - sdhci_writel(host, SDMMC_CALCR_ALWYSON | SDMMC_CALCR_EN, + if (priv->cal_always_on && (mask & SDHCI_RESET_ALL)) { + u32 calcr = sdhci_readl(host, SDMMC_CALCR); + + sdhci_writel(host, calcr | SDMMC_CALCR_ALWYSON | SDMMC_CALCR_EN, SDMMC_CALCR); + } } static const struct sdhci_ops sdhci_at91_sama5d2_ops = {
When enabling calibration at reset, the CALCR register was completely rewritten. This may cause certain bits being deleted unintentedly. Fix by issuing a read-modify-write operation. Fixes: 727d836a375a ("mmc: sdhci-of-at91: add DT property to enable calibration on full reset") Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> --- drivers/mmc/host/sdhci-of-at91.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-)