[01/28] net: add sock_set_reuseaddr
diff mbox series

Message ID 20200528051236.620353-2-hch@lst.de
State New
Headers show
Series
  • [01/28] net: add sock_set_reuseaddr
Related show

Commit Message

Christoph Hellwig May 28, 2020, 5:12 a.m. UTC
Add a helper to directly set the SO_REUSEADDR sockopt from kernel space
without going through a fake uaccess.

For this the iscsi target now has to formally depend on inet to avoid
a mostly theoretical compile failure.  For actual operation it already
did depend on having ipv4 or ipv6 support.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Sagi Grimberg <sagi@grimberg.me>
---
 drivers/infiniband/sw/siw/siw_cm.c        | 18 +++++-------------
 drivers/nvme/target/tcp.c                 |  8 +-------
 drivers/target/iscsi/Kconfig              |  2 +-
 drivers/target/iscsi/iscsi_target_login.c |  9 +--------
 fs/dlm/lowcomms.c                         |  6 +-----
 include/net/sock.h                        |  2 ++
 net/core/sock.c                           |  8 ++++++++
 7 files changed, 19 insertions(+), 34 deletions(-)

Patch
diff mbox series

diff --git a/drivers/infiniband/sw/siw/siw_cm.c b/drivers/infiniband/sw/siw/siw_cm.c
index 559e5fd3bad8b..d1860f3e87401 100644
--- a/drivers/infiniband/sw/siw/siw_cm.c
+++ b/drivers/infiniband/sw/siw/siw_cm.c
@@ -1312,17 +1312,14 @@  static void siw_cm_llp_state_change(struct sock *sk)
 static int kernel_bindconnect(struct socket *s, struct sockaddr *laddr,
 			      struct sockaddr *raddr)
 {
-	int rv, flags = 0, s_val = 1;
+	int rv, flags = 0;
 	size_t size = laddr->sa_family == AF_INET ?
 		sizeof(struct sockaddr_in) : sizeof(struct sockaddr_in6);
 
 	/*
 	 * Make address available again asap.
 	 */
-	rv = kernel_setsockopt(s, SOL_SOCKET, SO_REUSEADDR, (char *)&s_val,
-			       sizeof(s_val));
-	if (rv < 0)
-		return rv;
+	sock_set_reuseaddr(s->sk);
 
 	rv = s->ops->bind(s, laddr, size);
 	if (rv < 0)
@@ -1781,7 +1778,7 @@  int siw_create_listen(struct iw_cm_id *id, int backlog)
 	struct siw_cep *cep = NULL;
 	struct siw_device *sdev = to_siw_dev(id->device);
 	int addr_family = id->local_addr.ss_family;
-	int rv = 0, s_val;
+	int rv = 0;
 
 	if (addr_family != AF_INET && addr_family != AF_INET6)
 		return -EAFNOSUPPORT;
@@ -1793,13 +1790,8 @@  int siw_create_listen(struct iw_cm_id *id, int backlog)
 	/*
 	 * Allow binding local port when still in TIME_WAIT from last close.
 	 */
-	s_val = 1;
-	rv = kernel_setsockopt(s, SOL_SOCKET, SO_REUSEADDR, (char *)&s_val,
-			       sizeof(s_val));
-	if (rv) {
-		siw_dbg(id->device, "setsockopt error: %d\n", rv);
-		goto error;
-	}
+	sock_set_reuseaddr(s->sk);
+
 	if (addr_family == AF_INET) {
 		struct sockaddr_in *laddr = &to_sockaddr_in(id->local_addr);
 
diff --git a/drivers/nvme/target/tcp.c b/drivers/nvme/target/tcp.c
index f0da04e960f40..40757a63f4553 100644
--- a/drivers/nvme/target/tcp.c
+++ b/drivers/nvme/target/tcp.c
@@ -1632,6 +1632,7 @@  static int nvmet_tcp_add_port(struct nvmet_port *nport)
 	port->sock->sk->sk_user_data = port;
 	port->data_ready = port->sock->sk->sk_data_ready;
 	port->sock->sk->sk_data_ready = nvmet_tcp_listen_data_ready;
+	sock_set_reuseaddr(port->sock->sk);
 
 	opt = 1;
 	ret = kernel_setsockopt(port->sock, IPPROTO_TCP,
@@ -1641,13 +1642,6 @@  static int nvmet_tcp_add_port(struct nvmet_port *nport)
 		goto err_sock;
 	}
 
-	ret = kernel_setsockopt(port->sock, SOL_SOCKET, SO_REUSEADDR,
-			(char *)&opt, sizeof(opt));
-	if (ret) {
-		pr_err("failed to set SO_REUSEADDR sock opt %d\n", ret);
-		goto err_sock;
-	}
-
 	if (so_priority > 0) {
 		ret = kernel_setsockopt(port->sock, SOL_SOCKET, SO_PRIORITY,
 				(char *)&so_priority, sizeof(so_priority));
diff --git a/drivers/target/iscsi/Kconfig b/drivers/target/iscsi/Kconfig
index 1f93ea3813536..922484ea4e304 100644
--- a/drivers/target/iscsi/Kconfig
+++ b/drivers/target/iscsi/Kconfig
@@ -1,7 +1,7 @@ 
 # SPDX-License-Identifier: GPL-2.0-only
 config ISCSI_TARGET
 	tristate "Linux-iSCSI.org iSCSI Target Mode Stack"
-	depends on NET
+	depends on INET
 	select CRYPTO
 	select CRYPTO_CRC32C
 	select CRYPTO_CRC32C_INTEL if X86
diff --git a/drivers/target/iscsi/iscsi_target_login.c b/drivers/target/iscsi/iscsi_target_login.c
index 731ee67fe914b..91acb3f07b4cc 100644
--- a/drivers/target/iscsi/iscsi_target_login.c
+++ b/drivers/target/iscsi/iscsi_target_login.c
@@ -909,14 +909,7 @@  int iscsit_setup_np(
 		}
 	}
 
-	/* FIXME: Someone please explain why this is endian-safe */
-	ret = kernel_setsockopt(sock, SOL_SOCKET, SO_REUSEADDR,
-			(char *)&opt, sizeof(opt));
-	if (ret < 0) {
-		pr_err("kernel_setsockopt() for SO_REUSEADDR"
-			" failed\n");
-		goto fail;
-	}
+	sock_set_reuseaddr(sock->sk);
 
 	ret = kernel_setsockopt(sock, IPPROTO_IP, IP_FREEBIND,
 			(char *)&opt, sizeof(opt));
diff --git a/fs/dlm/lowcomms.c b/fs/dlm/lowcomms.c
index cdfaf4f0e11a0..b801e77e3e596 100644
--- a/fs/dlm/lowcomms.c
+++ b/fs/dlm/lowcomms.c
@@ -1244,12 +1244,8 @@  static struct socket *tcp_create_listen_sock(struct connection *con,
 	kernel_setsockopt(sock, SOL_TCP, TCP_NODELAY, (char *)&one,
 			  sizeof(one));
 
-	result = kernel_setsockopt(sock, SOL_SOCKET, SO_REUSEADDR,
-				   (char *)&one, sizeof(one));
+	sock_set_reuseaddr(sock->sk);
 
-	if (result < 0) {
-		log_print("Failed to set SO_REUSEADDR on socket: %d", result);
-	}
 	write_lock_bh(&sock->sk->sk_callback_lock);
 	sock->sk->sk_user_data = con;
 	save_listen_callbacks(sock);
diff --git a/include/net/sock.h b/include/net/sock.h
index 3e8c6d4b4b59f..2ec085044790c 100644
--- a/include/net/sock.h
+++ b/include/net/sock.h
@@ -2688,4 +2688,6 @@  static inline bool sk_dev_equal_l3scope(struct sock *sk, int dif)
 
 void sock_def_readable(struct sock *sk);
 
+void sock_set_reuseaddr(struct sock *sk);
+
 #endif	/* _SOCK_H */
diff --git a/net/core/sock.c b/net/core/sock.c
index fd85e651ce284..18eb84fdf5fbe 100644
--- a/net/core/sock.c
+++ b/net/core/sock.c
@@ -712,6 +712,14 @@  bool sk_mc_loop(struct sock *sk)
 }
 EXPORT_SYMBOL(sk_mc_loop);
 
+void sock_set_reuseaddr(struct sock *sk)
+{
+	lock_sock(sk);
+	sk->sk_reuse = SK_CAN_REUSE;
+	release_sock(sk);
+}
+EXPORT_SYMBOL(sock_set_reuseaddr);
+
 /*
  *	This is meant for all protocols to use and covers goings on
  *	at the socket level. Everything here is generic.