diff mbox series

[v2,13/24] mac80211: determine chandef from HE 6 GHz operation

Message ID 20200528213443.25687d2695bc.I3f9747c1147480f65445f13eda5c4a5ed4e86757@changeid (mailing list archive)
State Accepted
Delegated to: Johannes Berg
Headers show
Series [v2,01/24] nl80211: really allow client-only BIGTK support | expand

Commit Message

Johannes Berg May 28, 2020, 7:34 p.m. UTC
From: Johannes Berg <johannes.berg@intel.com>

Support connecting to HE 6 GHz APs and mesh networks on 6 GHz,
where the HT/VHT information is missing but instead the HE 6 GHz
band capability is present, and the 6 GHz Operation information
field is used to encode the channel configuration instead of the
HT/VHT operation elements.

Also add some other bits needed to connect to 6 GHz networks.

Link: https://lore.kernel.org/r/1589399105-25472-10-git-send-email-rmanohar@codeaurora.org
Co-developed-by: Rajkumar Manoharan <rmanohar@codeaurora.org>
Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 net/mac80211/ieee80211_i.h |   3 ++
 net/mac80211/mesh.c        |   1 +
 net/mac80211/mlme.c        |  69 +++++++++++++++++-------
 net/mac80211/util.c        | 106 +++++++++++++++++++++++++++++++++++++
 4 files changed, 160 insertions(+), 19 deletions(-)

Comments

Wen Gong Sept. 11, 2020, 9:29 a.m. UTC | #1
On 2020-05-29 03:34, Johannes Berg wrote:
> From: Johannes Berg <johannes.berg@intel.com>
> 
> Support connecting to HE 6 GHz APs and mesh networks on 6 GHz,
> where the HT/VHT information is missing but instead the HE 6 GHz
> band capability is present, and the 6 GHz Operation information
> field is used to encode the channel configuration instead of the
> HT/VHT operation elements.
> 
> Also add some other bits needed to connect to 6 GHz networks.
> 
> Link:
> https://lore.kernel.org/r/1589399105-25472-10-git-send-email-rmanohar@codeaurora.org
> Co-developed-by: Rajkumar Manoharan <rmanohar@codeaurora.org>
> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org>
> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
> ---
>  net/mac80211/ieee80211_i.h |   3 ++
>  net/mac80211/mesh.c        |   1 +
>  net/mac80211/mlme.c        |  69 +++++++++++++++++-------
>  net/mac80211/util.c        | 106 +++++++++++++++++++++++++++++++++++++
>  4 files changed, 160 insertions(+), 19 deletions(-)
> 
[...]
> @@ -4838,21 +4860,23 @@ static int ieee80211_prep_channel(struct
> ieee80211_sub_if_data *sdata,
>  			  IEEE80211_STA_DISABLE_160MHZ);
> 
>  	/* disable HT/VHT/HE if we don't support them */
> -	if (!sband->ht_cap.ht_supported) {
> +	if (!sband->ht_cap.ht_supported && !is_6ghz) {
>  		ifmgd->flags |= IEEE80211_STA_DISABLE_HT;
>  		ifmgd->flags |= IEEE80211_STA_DISABLE_VHT;
>  		ifmgd->flags |= IEEE80211_STA_DISABLE_HE;
>  	}
> 
> -	if (!sband->vht_cap.vht_supported)
> +	if (!sband->vht_cap.vht_supported && !is_6ghz) {
>  		ifmgd->flags |= IEEE80211_STA_DISABLE_VHT;
> +		ifmgd->flags |= IEEE80211_STA_DISABLE_HE;
> +	}
when connec to NL80211_BAND_2GHZ, it does not support vht, then it 
failed for HE and connected with HT mode.
I tesed with below change, it fix the issue, it connected with HE mode 
for NL80211_BAND_2GHZ with an HE mode 11AX AP.
diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index b2a9d47cf86d..c85186799d05 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -4853,6 +4853,7 @@ static int ieee80211_prep_channel(struct 
ieee80211_sub_if_data *sdata,
         struct ieee80211_supported_band *sband;
         struct cfg80211_chan_def chandef;
         bool is_6ghz = cbss->channel->band == NL80211_BAND_6GHZ;
+       bool is_5ghz = cbss->channel->band == NL80211_BAND_5GHZ;
         struct ieee80211_bss *bss = (void *)cbss->priv;
         int ret;
         u32 i;
@@ -4871,7 +4872,7 @@ static int ieee80211_prep_channel(struct 
ieee80211_sub_if_data *sdata,
                 ifmgd->flags |= IEEE80211_STA_DISABLE_HE;
         }

-       if (!sband->vht_cap.vht_supported && !is_6ghz) {
+       if (!sband->vht_cap.vht_supported && is_5ghz) {
                 ifmgd->flags |= IEEE80211_STA_DISABLE_VHT;
                 ifmgd->flags |= IEEE80211_STA_DISABLE_HE;
         }
> 
>  	if (!ieee80211_get_he_sta_cap(sband))
>  		ifmgd->flags |= IEEE80211_STA_DISABLE_HE;
> 
>  	rcu_read_lock();
> 
> -	if (!(ifmgd->flags & IEEE80211_STA_DISABLE_HT)) {
> +	if (!(ifmgd->flags & IEEE80211_STA_DISABLE_HT) && !is_6ghz) {
>  		const u8 *ht_oper_ie, *ht_cap_ie;
> 
>  		ht_oper_ie = ieee80211_bss_get_ie(cbss, WLAN_EID_HT_OPERATION);
[...]
Johannes Berg Sept. 11, 2020, 10:06 a.m. UTC | #2
On Fri, 2020-09-11 at 09:29 +0000, Wen Gong wrote:
> On 2020-05-29 03:34, Johannes Berg wrote:
> > From: Johannes Berg <johannes.berg@intel.com>
> > 
> > Support connecting to HE 6 GHz APs and mesh networks on 6 GHz,
> > where the HT/VHT information is missing but instead the HE 6 GHz
> > band capability is present, and the 6 GHz Operation information
> > field is used to encode the channel configuration instead of the
> > HT/VHT operation elements.
> > 
> > Also add some other bits needed to connect to 6 GHz networks.
> > 
> > Link:
> > https://lore.kernel.org/r/1589399105-25472-10-git-send-email-rmanohar@codeaurora.org
> > Co-developed-by: Rajkumar Manoharan <rmanohar@codeaurora.org>
> > Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org>
> > Signed-off-by: Johannes Berg <johannes.berg@intel.com>
> > ---
> >  net/mac80211/ieee80211_i.h |   3 ++
> >  net/mac80211/mesh.c        |   1 +
> >  net/mac80211/mlme.c        |  69 +++++++++++++++++-------
> >  net/mac80211/util.c        | 106 +++++++++++++++++++++++++++++++++++++
> >  4 files changed, 160 insertions(+), 19 deletions(-)
> > 
> [...]
> > @@ -4838,21 +4860,23 @@ static int ieee80211_prep_channel(struct
> > ieee80211_sub_if_data *sdata,
> >  			  IEEE80211_STA_DISABLE_160MHZ);
> > 
> >  	/* disable HT/VHT/HE if we don't support them */
> > -	if (!sband->ht_cap.ht_supported) {
> > +	if (!sband->ht_cap.ht_supported && !is_6ghz) {
> >  		ifmgd->flags |= IEEE80211_STA_DISABLE_HT;
> >  		ifmgd->flags |= IEEE80211_STA_DISABLE_VHT;
> >  		ifmgd->flags |= IEEE80211_STA_DISABLE_HE;
> >  	}
> > 
> > -	if (!sband->vht_cap.vht_supported)
> > +	if (!sband->vht_cap.vht_supported && !is_6ghz) {
> >  		ifmgd->flags |= IEEE80211_STA_DISABLE_VHT;
> > +		ifmgd->flags |= IEEE80211_STA_DISABLE_HE;
> > +	}
> when connec to NL80211_BAND_2GHZ, it does not support vht, then it 
> failed for HE and connected with HT mode.
> I tesed with below change, it fix the issue, it connected with HE mode 
> for NL80211_BAND_2GHZ with an HE mode 11AX AP.

Hmm. Yeah, that seems reasonable. I wonder why/how we never saw this,
hm.

Can you send a real patch?

johannes
Wen Gong Sept. 11, 2020, 10:30 a.m. UTC | #3
On 2020-09-11 18:06, Johannes Berg wrote:
> On Fri, 2020-09-11 at 09:29 +0000, Wen Gong wrote:
>> On 2020-05-29 03:34, Johannes Berg wrote:
>> > From: Johannes Berg <johannes.berg@intel.com>
>> >
>> > Support connecting to HE 6 GHz APs and mesh networks on 6 GHz,
>> > where the HT/VHT information is missing but instead the HE 6 GHz
>> > band capability is present, and the 6 GHz Operation information
>> > field is used to encode the channel configuration instead of the
>> > HT/VHT operation elements.
>> >
>> > Also add some other bits needed to connect to 6 GHz networks.
>> >
>> > Link:
>> > https://lore.kernel.org/r/1589399105-25472-10-git-send-email-rmanohar@codeaurora.org
>> > Co-developed-by: Rajkumar Manoharan <rmanohar@codeaurora.org>
>> > Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org>
>> > Signed-off-by: Johannes Berg <johannes.berg@intel.com>
>> > ---
>> >  net/mac80211/ieee80211_i.h |   3 ++
>> >  net/mac80211/mesh.c        |   1 +
>> >  net/mac80211/mlme.c        |  69 +++++++++++++++++-------
>> >  net/mac80211/util.c        | 106 +++++++++++++++++++++++++++++++++++++
>> >  4 files changed, 160 insertions(+), 19 deletions(-)
>> >
>> [...]
>> > @@ -4838,21 +4860,23 @@ static int ieee80211_prep_channel(struct
>> > ieee80211_sub_if_data *sdata,
>> >  			  IEEE80211_STA_DISABLE_160MHZ);
>> >
>> >  	/* disable HT/VHT/HE if we don't support them */
>> > -	if (!sband->ht_cap.ht_supported) {
>> > +	if (!sband->ht_cap.ht_supported && !is_6ghz) {
>> >  		ifmgd->flags |= IEEE80211_STA_DISABLE_HT;
>> >  		ifmgd->flags |= IEEE80211_STA_DISABLE_VHT;
>> >  		ifmgd->flags |= IEEE80211_STA_DISABLE_HE;
>> >  	}
>> >
>> > -	if (!sband->vht_cap.vht_supported)
>> > +	if (!sband->vht_cap.vht_supported && !is_6ghz) {
>> >  		ifmgd->flags |= IEEE80211_STA_DISABLE_VHT;
>> > +		ifmgd->flags |= IEEE80211_STA_DISABLE_HE;
>> > +	}
>> when connec to NL80211_BAND_2GHZ, it does not support vht, then it
>> failed for HE and connected with HT mode.
>> I tesed with below change, it fix the issue, it connected with HE mode
>> for NL80211_BAND_2GHZ with an HE mode 11AX AP.
> 
> Hmm. Yeah, that seems reasonable. I wonder why/how we never saw this,
> hm.
> 
> Can you send a real patch?
> 
yes, patch sent:
https://lore.kernel.org/linux-wireless/010101747cb617f2-593c5410-1648-4a42-97a0-f3646a5a6dd1-000000@us-west-2.amazonses.com/
> johannes
diff mbox series

Patch

diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
index 0cc584574976..6cac5bf7cba3 100644
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -2202,6 +2202,9 @@  bool ieee80211_chandef_vht_oper(struct ieee80211_hw *hw, u32 vht_cap_info,
 				const struct ieee80211_vht_operation *oper,
 				const struct ieee80211_ht_operation *htop,
 				struct cfg80211_chan_def *chandef);
+bool ieee80211_chandef_he_6ghz_oper(struct ieee80211_sub_if_data *sdata,
+				    const struct ieee80211_he_operation *he_oper,
+				    struct cfg80211_chan_def *chandef);
 u32 ieee80211_chandef_downgrade(struct cfg80211_chan_def *c);
 
 int __must_check
diff --git a/net/mac80211/mesh.c b/net/mac80211/mesh.c
index 696d6fb322e6..5f1ca25b6c97 100644
--- a/net/mac80211/mesh.c
+++ b/net/mac80211/mesh.c
@@ -104,6 +104,7 @@  bool mesh_matches_local(struct ieee80211_sub_if_data *sdata,
 	ieee80211_chandef_vht_oper(&sdata->local->hw, vht_cap_info,
 				   ie->vht_operation, ie->ht_operation,
 				   &sta_chan_def);
+	ieee80211_chandef_he_6ghz_oper(sdata, ie->he_operation, &sta_chan_def);
 
 	if (!cfg80211_chandef_compatible(&sdata->vif.bss_conf.chandef,
 					 &sta_chan_def))
diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index 1f9c48414c85..bc558d1d20fc 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -156,15 +156,24 @@  ieee80211_determine_chantype(struct ieee80211_sub_if_data *sdata,
 	struct ieee80211_sta_ht_cap sta_ht_cap;
 	u32 ht_cfreq, ret;
 
-	memcpy(&sta_ht_cap, &sband->ht_cap, sizeof(sta_ht_cap));
-	ieee80211_apply_htcap_overrides(sdata, &sta_ht_cap);
-
 	memset(chandef, 0, sizeof(struct cfg80211_chan_def));
 	chandef->chan = channel;
 	chandef->width = NL80211_CHAN_WIDTH_20_NOHT;
 	chandef->center_freq1 = channel->center_freq;
 	chandef->freq1_offset = channel->freq_offset;
 
+	if (channel->band == NL80211_BAND_6GHZ) {
+		if (!ieee80211_chandef_he_6ghz_oper(sdata, he_oper, chandef))
+			ret = IEEE80211_STA_DISABLE_HT |
+			      IEEE80211_STA_DISABLE_VHT |
+			      IEEE80211_STA_DISABLE_HE;
+		vht_chandef = *chandef;
+		goto out;
+	}
+
+	memcpy(&sta_ht_cap, &sband->ht_cap, sizeof(sta_ht_cap));
+	ieee80211_apply_htcap_overrides(sdata, &sta_ht_cap);
+
 	if (!ht_oper || !sta_ht_cap.ht_supported) {
 		ret = IEEE80211_STA_DISABLE_HT |
 		      IEEE80211_STA_DISABLE_VHT |
@@ -914,7 +923,8 @@  static void ieee80211_send_assoc(struct ieee80211_sub_if_data *sdata)
 			 !(ifmgd->flags & IEEE80211_STA_DISABLE_VHT)))
 		ifmgd->flags |= IEEE80211_STA_DISABLE_VHT;
 
-	if (!(ifmgd->flags & IEEE80211_STA_DISABLE_HT))
+	if (sband->band != NL80211_BAND_6GHZ &&
+	    !(ifmgd->flags & IEEE80211_STA_DISABLE_HT))
 		ieee80211_add_ht_ie(sdata, skb, assoc_data->ap_ht_param,
 				    sband, chan, sdata->smps_mode);
 
@@ -968,7 +978,8 @@  static void ieee80211_send_assoc(struct ieee80211_sub_if_data *sdata)
 		offset = noffset;
 	}
 
-	if (!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT))
+	if (sband->band != NL80211_BAND_6GHZ &&
+	    !(ifmgd->flags & IEEE80211_STA_DISABLE_VHT))
 		ieee80211_add_vht_ie(sdata, skb, sband,
 				     &assoc_data->ap_vht_cap);
 
@@ -3248,6 +3259,7 @@  static bool ieee80211_assoc_success(struct ieee80211_sub_if_data *sdata,
 	struct ieee80211_bss_conf *bss_conf = &sdata->vif.bss_conf;
 	const struct cfg80211_bss_ies *bss_ies = NULL;
 	struct ieee80211_mgd_assoc_data *assoc_data = ifmgd->assoc_data;
+	bool is_6ghz = cbss->channel->band == NL80211_BAND_6GHZ;
 	u32 changed = 0;
 	int err;
 	bool ret;
@@ -3289,11 +3301,12 @@  static bool ieee80211_assoc_success(struct ieee80211_sub_if_data *sdata,
 	 * 2G/3G/4G wifi routers, reported models include the "Onda PN51T",
 	 * "Vodafone PocketWiFi 2", "ZTE MF60" and a similar T-Mobile device.
 	 */
-	if ((assoc_data->wmm && !elems->wmm_param) ||
-	    (!(ifmgd->flags & IEEE80211_STA_DISABLE_HT) &&
-	     (!elems->ht_cap_elem || !elems->ht_operation)) ||
-	    (!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT) &&
-	     (!elems->vht_cap_elem || !elems->vht_operation))) {
+	if (!is_6ghz &&
+	    ((assoc_data->wmm && !elems->wmm_param) ||
+	     (!(ifmgd->flags & IEEE80211_STA_DISABLE_HT) &&
+	      (!elems->ht_cap_elem || !elems->ht_operation)) ||
+	     (!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT) &&
+	      (!elems->vht_cap_elem || !elems->vht_operation)))) {
 		const struct cfg80211_bss_ies *ies;
 		struct ieee802_11_elems bss_elems;
 
@@ -3351,7 +3364,7 @@  static bool ieee80211_assoc_success(struct ieee80211_sub_if_data *sdata,
 	 * We previously checked these in the beacon/probe response, so
 	 * they should be present here. This is just a safety net.
 	 */
-	if (!(ifmgd->flags & IEEE80211_STA_DISABLE_HT) &&
+	if (!is_6ghz && !(ifmgd->flags & IEEE80211_STA_DISABLE_HT) &&
 	    (!elems->wmm_param || !elems->ht_cap_elem || !elems->ht_operation)) {
 		sdata_info(sdata,
 			   "HT AP is missing WMM params or HT capability/operation\n");
@@ -3359,7 +3372,7 @@  static bool ieee80211_assoc_success(struct ieee80211_sub_if_data *sdata,
 		goto out;
 	}
 
-	if (!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT) &&
+	if (!is_6ghz && !(ifmgd->flags & IEEE80211_STA_DISABLE_VHT) &&
 	    (!elems->vht_cap_elem || !elems->vht_operation)) {
 		sdata_info(sdata,
 			   "VHT AP is missing VHT capability/operation\n");
@@ -3367,6 +3380,14 @@  static bool ieee80211_assoc_success(struct ieee80211_sub_if_data *sdata,
 		goto out;
 	}
 
+	if (is_6ghz && !(ifmgd->flags & IEEE80211_STA_DISABLE_HE) &&
+	    !elems->he_6ghz_capa) {
+		sdata_info(sdata,
+			   "HE 6 GHz AP is missing HE 6 GHz band capability\n");
+		ret = false;
+		goto out;
+	}
+
 	mutex_lock(&sdata->local->sta_mtx);
 	/*
 	 * station info was already allocated and inserted before
@@ -4826,6 +4847,7 @@  static int ieee80211_prep_channel(struct ieee80211_sub_if_data *sdata,
 	const struct ieee80211_he_operation *he_oper = NULL;
 	struct ieee80211_supported_band *sband;
 	struct cfg80211_chan_def chandef;
+	bool is_6ghz = cbss->channel->band == NL80211_BAND_6GHZ;
 	struct ieee80211_bss *bss = (void *)cbss->priv;
 	int ret;
 	u32 i;
@@ -4838,21 +4860,23 @@  static int ieee80211_prep_channel(struct ieee80211_sub_if_data *sdata,
 			  IEEE80211_STA_DISABLE_160MHZ);
 
 	/* disable HT/VHT/HE if we don't support them */
-	if (!sband->ht_cap.ht_supported) {
+	if (!sband->ht_cap.ht_supported && !is_6ghz) {
 		ifmgd->flags |= IEEE80211_STA_DISABLE_HT;
 		ifmgd->flags |= IEEE80211_STA_DISABLE_VHT;
 		ifmgd->flags |= IEEE80211_STA_DISABLE_HE;
 	}
 
-	if (!sband->vht_cap.vht_supported)
+	if (!sband->vht_cap.vht_supported && !is_6ghz) {
 		ifmgd->flags |= IEEE80211_STA_DISABLE_VHT;
+		ifmgd->flags |= IEEE80211_STA_DISABLE_HE;
+	}
 
 	if (!ieee80211_get_he_sta_cap(sband))
 		ifmgd->flags |= IEEE80211_STA_DISABLE_HE;
 
 	rcu_read_lock();
 
-	if (!(ifmgd->flags & IEEE80211_STA_DISABLE_HT)) {
+	if (!(ifmgd->flags & IEEE80211_STA_DISABLE_HT) && !is_6ghz) {
 		const u8 *ht_oper_ie, *ht_cap_ie;
 
 		ht_oper_ie = ieee80211_bss_get_ie(cbss, WLAN_EID_HT_OPERATION);
@@ -4869,7 +4893,7 @@  static int ieee80211_prep_channel(struct ieee80211_sub_if_data *sdata,
 		}
 	}
 
-	if (!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT)) {
+	if (!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT) && !is_6ghz) {
 		const u8 *vht_oper_ie, *vht_cap;
 
 		vht_oper_ie = ieee80211_bss_get_ie(cbss,
@@ -4934,6 +4958,11 @@  static int ieee80211_prep_channel(struct ieee80211_sub_if_data *sdata,
 
 	rcu_read_unlock();
 
+	if (ifmgd->flags & IEEE80211_STA_DISABLE_HE && is_6ghz) {
+		sdata_info(sdata, "Rejecting non-HE 6/7 GHz connection");
+		return -EINVAL;
+	}
+
 	/* will change later if needed */
 	sdata->smps_mode = IEEE80211_SMPS_OFF;
 
@@ -5315,6 +5344,7 @@  int ieee80211_mgd_auth(struct ieee80211_sub_if_data *sdata,
 int ieee80211_mgd_assoc(struct ieee80211_sub_if_data *sdata,
 			struct cfg80211_assoc_request *req)
 {
+	bool is_6ghz = req->bss->channel->band == NL80211_BAND_6GHZ;
 	struct ieee80211_local *local = sdata->local;
 	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
 	struct ieee80211_bss *bss = (void *)req->bss->priv;
@@ -5457,14 +5487,15 @@  int ieee80211_mgd_assoc(struct ieee80211_sub_if_data *sdata,
 	if (ht_ie && ht_ie[1] >= sizeof(struct ieee80211_ht_operation))
 		assoc_data->ap_ht_param =
 			((struct ieee80211_ht_operation *)(ht_ie + 2))->ht_param;
-	else
+	else if (!is_6ghz)
 		ifmgd->flags |= IEEE80211_STA_DISABLE_HT;
 	vht_ie = ieee80211_bss_get_ie(req->bss, WLAN_EID_VHT_CAPABILITY);
 	if (vht_ie && vht_ie[1] >= sizeof(struct ieee80211_vht_cap))
 		memcpy(&assoc_data->ap_vht_cap, vht_ie + 2,
 		       sizeof(struct ieee80211_vht_cap));
-	else
-		ifmgd->flags |= IEEE80211_STA_DISABLE_VHT;
+	else if (!is_6ghz)
+		ifmgd->flags |= IEEE80211_STA_DISABLE_VHT |
+				IEEE80211_STA_DISABLE_HE;
 	rcu_read_unlock();
 
 	if (WARN((sdata->vif.driver_flags & IEEE80211_VIF_SUPPORTS_UAPSD) &&
diff --git a/net/mac80211/util.c b/net/mac80211/util.c
index e6104829fa1c..cbe24d303f0d 100644
--- a/net/mac80211/util.c
+++ b/net/mac80211/util.c
@@ -3244,6 +3244,112 @@  bool ieee80211_chandef_vht_oper(struct ieee80211_hw *hw, u32 vht_cap_info,
 	return true;
 }
 
+bool ieee80211_chandef_he_6ghz_oper(struct ieee80211_sub_if_data *sdata,
+				    const struct ieee80211_he_operation *he_oper,
+				    struct cfg80211_chan_def *chandef)
+{
+	struct ieee80211_local *local = sdata->local;
+	struct ieee80211_supported_band *sband;
+	enum nl80211_iftype iftype = ieee80211_vif_type_p2p(&sdata->vif);
+	const struct ieee80211_sta_he_cap *he_cap;
+	struct cfg80211_chan_def he_chandef = *chandef;
+	const struct ieee80211_he_6ghz_oper *he_6ghz_oper;
+	bool support_80_80, support_160;
+	u8 he_phy_cap;
+	u32 freq;
+
+	if (chandef->chan->band != NL80211_BAND_6GHZ)
+		return true;
+
+	sband = local->hw.wiphy->bands[NL80211_BAND_6GHZ];
+
+	he_cap = ieee80211_get_he_iftype_cap(sband, iftype);
+	if (!he_cap) {
+		sdata_info(sdata, "Missing iftype sband data/HE cap");
+		return false;
+	}
+
+	he_phy_cap = he_cap->he_cap_elem.phy_cap_info[0];
+	support_160 =
+		he_phy_cap &
+		IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_160MHZ_IN_5G;
+	support_80_80 =
+		he_phy_cap &
+		IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_80PLUS80_MHZ_IN_5G;
+
+	if (!he_oper) {
+		sdata_info(sdata,
+			   "HE is not advertised on (on %d MHz), expect issues\n",
+			   chandef->chan->center_freq);
+		return false;
+	}
+
+	he_6ghz_oper = ieee80211_he_6ghz_oper(he_oper);
+
+	if (!he_6ghz_oper) {
+		sdata_info(sdata,
+			   "HE 6GHz operation missing (on %d MHz), expect issues\n",
+			   chandef->chan->center_freq);
+		return false;
+	}
+
+	freq = ieee80211_channel_to_frequency(he_6ghz_oper->primary,
+					      NL80211_BAND_6GHZ);
+	he_chandef.chan = ieee80211_get_channel(sdata->local->hw.wiphy, freq);
+
+	switch (u8_get_bits(he_6ghz_oper->control,
+			    IEEE80211_HE_6GHZ_OPER_CTRL_CHANWIDTH)) {
+	case IEEE80211_HE_6GHZ_OPER_CTRL_CHANWIDTH_20MHZ:
+		he_chandef.width = NL80211_CHAN_WIDTH_20;
+		break;
+	case IEEE80211_HE_6GHZ_OPER_CTRL_CHANWIDTH_40MHZ:
+		he_chandef.width = NL80211_CHAN_WIDTH_40;
+		break;
+	case IEEE80211_HE_6GHZ_OPER_CTRL_CHANWIDTH_80MHZ:
+		he_chandef.width = NL80211_CHAN_WIDTH_80;
+		break;
+	case IEEE80211_HE_6GHZ_OPER_CTRL_CHANWIDTH_160MHZ:
+		he_chandef.width = NL80211_CHAN_WIDTH_80;
+		if (!he_6ghz_oper->ccfs1)
+			break;
+		if (abs(he_6ghz_oper->ccfs1 - he_6ghz_oper->ccfs0) == 8) {
+			if (support_160)
+				he_chandef.width = NL80211_CHAN_WIDTH_160;
+		} else {
+			if (support_80_80)
+				he_chandef.width = NL80211_CHAN_WIDTH_80P80;
+		}
+		break;
+	}
+
+	if (he_chandef.width == NL80211_CHAN_WIDTH_160) {
+		he_chandef.center_freq1 =
+			ieee80211_channel_to_frequency(he_6ghz_oper->ccfs1,
+						       NL80211_BAND_6GHZ);
+	} else {
+		he_chandef.center_freq1 =
+			ieee80211_channel_to_frequency(he_6ghz_oper->ccfs0,
+						       NL80211_BAND_6GHZ);
+		he_chandef.center_freq2 =
+			ieee80211_channel_to_frequency(he_6ghz_oper->ccfs1,
+						       NL80211_BAND_6GHZ);
+	}
+
+	if (!cfg80211_chandef_valid(&he_chandef)) {
+		sdata_info(sdata,
+			   "HE 6GHz operation resulted in invalid chandef: %d MHz/%d/%d MHz/%d MHz\n",
+			   he_chandef.chan ? he_chandef.chan->center_freq : 0,
+			   he_chandef.width,
+			   he_chandef.center_freq1,
+			   he_chandef.center_freq2);
+		return false;
+	}
+
+	*chandef = he_chandef;
+
+	return true;
+}
+
 int ieee80211_parse_bitrates(struct cfg80211_chan_def *chandef,
 			     const struct ieee80211_supported_band *sband,
 			     const u8 *srates, int srates_len, u32 *rates)