[v3,5/9] usb: xhci-pci: Add support for reset controllers
diff mbox series

Message ID 20200612171334.26385-6-nsaenzjulienne@suse.de
State Superseded
Headers show
Series
  • Raspberry Pi 4 USB firmware initialization rework
Related show

Commit Message

Nicolas Saenz Julienne June 12, 2020, 5:13 p.m. UTC
Some atypical users of xhci-pci might need to manually reset their xHCI
controller before starting the HCD setup. Check if a reset controller
device is available to the PCI bus and trigger a reset.

Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>

---

Changes since v2:
 - Also reset on resume

Changes since v1:
 - Use proper reset API
 - Make code simpler

 drivers/usb/host/xhci-pci.c | 10 ++++++++++
 drivers/usb/host/xhci.h     |  2 ++
 2 files changed, 12 insertions(+)

Comments

Florian Fainelli June 12, 2020, 5:24 p.m. UTC | #1
On 6/12/2020 10:13 AM, Nicolas Saenz Julienne wrote:
> Some atypical users of xhci-pci might need to manually reset their xHCI
> controller before starting the HCD setup. Check if a reset controller
> device is available to the PCI bus and trigger a reset.
> 
> Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>

Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Mathias Nyman June 15, 2020, 7:29 a.m. UTC | #2
On 12.6.2020 20.13, Nicolas Saenz Julienne wrote:
> Some atypical users of xhci-pci might need to manually reset their xHCI
> controller before starting the HCD setup. Check if a reset controller
> device is available to the PCI bus and trigger a reset.
> 
> Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>

Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Philipp Zabel June 17, 2020, 10:02 a.m. UTC | #3
On Fri, 2020-06-12 at 19:13 +0200, Nicolas Saenz Julienne wrote:
> Some atypical users of xhci-pci might need to manually reset their xHCI
> controller before starting the HCD setup. Check if a reset controller
> device is available to the PCI bus and trigger a reset.
> 
> Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
> 
> ---
> 
> Changes since v2:
>  - Also reset on resume
> 
> Changes since v1:
>  - Use proper reset API
>  - Make code simpler
> 
>  drivers/usb/host/xhci-pci.c | 10 ++++++++++
>  drivers/usb/host/xhci.h     |  2 ++
>  2 files changed, 12 insertions(+)
> 
> diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
> index ef513c2fb843..e76b9283faa3 100644
> --- a/drivers/usb/host/xhci-pci.c
> +++ b/drivers/usb/host/xhci-pci.c
> @@ -12,6 +12,7 @@
>  #include <linux/slab.h>
>  #include <linux/module.h>
>  #include <linux/acpi.h>
> +#include <linux/reset.h>
>  
>  #include "xhci.h"
>  #include "xhci-trace.h"
> @@ -339,6 +340,7 @@ static int xhci_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
>  	struct xhci_hcd *xhci;
>  	struct usb_hcd *hcd;
>  	struct xhci_driver_data *driver_data;
> +	struct reset_control *reset;
>  
>  	driver_data = (struct xhci_driver_data *)id->driver_data;
>  	if (driver_data && driver_data->quirks & XHCI_RENESAS_FW_QUIRK) {
> @@ -347,6 +349,11 @@ static int xhci_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
>  			return retval;
>  	}
>  
> +	reset = devm_reset_control_get_optional_exclusive(&dev->bus->dev, NULL);
> +	if (IS_ERR(reset))
> +		return PTR_ERR(reset);
> +	reset_control_reset(reset);

Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>

regards
Philipp

Patch
diff mbox series

diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index ef513c2fb843..e76b9283faa3 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -12,6 +12,7 @@ 
 #include <linux/slab.h>
 #include <linux/module.h>
 #include <linux/acpi.h>
+#include <linux/reset.h>
 
 #include "xhci.h"
 #include "xhci-trace.h"
@@ -339,6 +340,7 @@  static int xhci_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
 	struct xhci_hcd *xhci;
 	struct usb_hcd *hcd;
 	struct xhci_driver_data *driver_data;
+	struct reset_control *reset;
 
 	driver_data = (struct xhci_driver_data *)id->driver_data;
 	if (driver_data && driver_data->quirks & XHCI_RENESAS_FW_QUIRK) {
@@ -347,6 +349,11 @@  static int xhci_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
 			return retval;
 	}
 
+	reset = devm_reset_control_get_optional_exclusive(&dev->bus->dev, NULL);
+	if (IS_ERR(reset))
+		return PTR_ERR(reset);
+	reset_control_reset(reset);
+
 	/* Prevent runtime suspending between USB-2 and USB-3 initialization */
 	pm_runtime_get_noresume(&dev->dev);
 
@@ -364,6 +371,7 @@  static int xhci_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
 	/* USB 2.0 roothub is stored in the PCI device now. */
 	hcd = dev_get_drvdata(&dev->dev);
 	xhci = hcd_to_xhci(hcd);
+	xhci->reset = reset;
 	xhci->shared_hcd = usb_create_shared_hcd(&xhci_pci_hc_driver, &dev->dev,
 						 pci_name(dev), hcd);
 	if (!xhci->shared_hcd) {
@@ -515,6 +523,8 @@  static int xhci_pci_resume(struct usb_hcd *hcd, bool hibernated)
 	struct pci_dev		*pdev = to_pci_dev(hcd->self.controller);
 	int			retval = 0;
 
+	reset_control_reset(xhci->reset);
+
 	/* The BIOS on systems with the Intel Panther Point chipset may or may
 	 * not support xHCI natively.  That means that during system resume, it
 	 * may switch the ports back to EHCI so that users can use their
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 2c6c4f8d1ee1..379ffa24877d 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1770,6 +1770,8 @@  struct xhci_hcd {
 	/* optional clocks */
 	struct clk		*clk;
 	struct clk		*reg_clk;
+	/* optional reset controller */
+	struct reset_control *reset;
 	/* data structures */
 	struct xhci_device_context_array *dcbaa;
 	struct xhci_ring	*cmd_ring;