From patchwork Fri Jun 12 17:13:26 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Nicolas Saenz Julienne X-Patchwork-Id: 11602093 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 5578792A for ; Fri, 12 Jun 2020 17:14:38 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 464E6208B6 for ; Fri, 12 Jun 2020 17:14:38 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1726335AbgFLRNr (ORCPT ); Fri, 12 Jun 2020 13:13:47 -0400 Received: from mx2.suse.de ([195.135.220.15]:50588 "EHLO mx2.suse.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1726310AbgFLRNq (ORCPT ); Fri, 12 Jun 2020 13:13:46 -0400 X-Virus-Scanned: by amavisd-new at test-mx.suse.de Received: from relay2.suse.de (unknown [195.135.220.254]) by mx2.suse.de (Postfix) with ESMTP id B35A8AC64; Fri, 12 Jun 2020 17:13:48 +0000 (UTC) From: Nicolas Saenz Julienne To: f.fainelli@gmail.com, gregkh@linuxfoundation.org, wahrenst@gmx.net, p.zabel@pengutronix.de, linux-kernel@vger.kernel.org Cc: linux-usb@vger.kernel.org, linux-rpi-kernel@lists.infradead.org, linux-arm-kernel@lists.infradead.org, bcm-kernel-feedback-list@broadcom.com, tim.gover@raspberrypi.org, linux-pci@vger.kernel.org, helgaas@kernel.org, andy.shevchenko@gmail.com, mathias.nyman@linux.intel.com, lorenzo.pieralisi@arm.com, Nicolas Saenz Julienne Subject: [PATCH v3 2/9] reset: Add Raspberry Pi 4 firmware reset controller Date: Fri, 12 Jun 2020 19:13:26 +0200 Message-Id: <20200612171334.26385-3-nsaenzjulienne@suse.de> X-Mailer: git-send-email 2.26.2 In-Reply-To: <20200612171334.26385-1-nsaenzjulienne@suse.de> References: <20200612171334.26385-1-nsaenzjulienne@suse.de> MIME-Version: 1.0 Sender: linux-pci-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-pci@vger.kernel.org Raspberry Pi 4's co-processor controls some of the board's HW initialization process, but it's up to Linux to trigger it when relevant. Introduce a reset controller capable of interfacing with RPi4's co-processor that models these firmware initialization routines as reset lines. Signed-off-by: Nicolas Saenz Julienne Reviewed-by: Florian Fainelli Reviewed-by: Philipp Zabel --- Changes since v2: - Get ids from dt-binding Changes since v1: - Make the whole driver less USB centric as per Florian's comments drivers/reset/Kconfig | 11 +++ drivers/reset/Makefile | 1 + drivers/reset/reset-raspberrypi.c | 122 ++++++++++++++++++++++++++++++ 3 files changed, 134 insertions(+) create mode 100644 drivers/reset/reset-raspberrypi.c diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig index d9efbfd29646..97e848740e13 100644 --- a/drivers/reset/Kconfig +++ b/drivers/reset/Kconfig @@ -140,6 +140,17 @@ config RESET_QCOM_PDC to control reset signals provided by PDC for Modem, Compute, Display, GPU, Debug, AOP, Sensors, Audio, SP and APPS. +config RESET_RASPBERRYPI + tristate "Raspberry Pi 4 Firmware Reset Driver" + depends on RASPBERRYPI_FIRMWARE || (RASPBERRYPI_FIRMWARE=n && COMPILE_TEST) + default USB_XHCI_PCI + help + Raspberry Pi 4's co-processor controls some of the board's HW + initialization process, but it's up to Linux to trigger it when + relevant. This driver provides a reset controller capable of + interfacing with RPi4's co-processor and model these firmware + initialization routines as reset lines. + config RESET_SCMI tristate "Reset driver controlled via ARM SCMI interface" depends on ARM_SCMI_PROTOCOL || COMPILE_TEST diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile index 249ed357c997..16947610cc3b 100644 --- a/drivers/reset/Makefile +++ b/drivers/reset/Makefile @@ -21,6 +21,7 @@ obj-$(CONFIG_RESET_OXNAS) += reset-oxnas.o obj-$(CONFIG_RESET_PISTACHIO) += reset-pistachio.o obj-$(CONFIG_RESET_QCOM_AOSS) += reset-qcom-aoss.o obj-$(CONFIG_RESET_QCOM_PDC) += reset-qcom-pdc.o +obj-$(CONFIG_RESET_RASPBERRYPI) += reset-raspberrypi.o obj-$(CONFIG_RESET_SCMI) += reset-scmi.o obj-$(CONFIG_RESET_SIMPLE) += reset-simple.o obj-$(CONFIG_RESET_STM32MP157) += reset-stm32mp1.o diff --git a/drivers/reset/reset-raspberrypi.c b/drivers/reset/reset-raspberrypi.c new file mode 100644 index 000000000000..91aa29f893b9 --- /dev/null +++ b/drivers/reset/reset-raspberrypi.c @@ -0,0 +1,122 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Raspberry Pi 4 firmware reset driver + * + * Copyright (C) 2020 Nicolas Saenz Julienne + */ +#include +#include +#include +#include +#include +#include +#include +#include + +struct rpi_reset { + struct reset_controller_dev rcdev; + struct rpi_firmware *fw; +}; + +static inline struct rpi_reset *to_rpi(struct reset_controller_dev *rcdev) +{ + return container_of(rcdev, struct rpi_reset, rcdev); +} + +static int rpi_reset_reset(struct reset_controller_dev *rcdev, unsigned long id) +{ + struct rpi_reset *priv = to_rpi(rcdev); + u32 dev_addr; + int ret; + + switch (id) { + case RASPBERRYPI_FIRMWARE_RESET_ID_USB: + /* + * The Raspberry Pi 4 gets its USB functionality from VL805, a + * PCIe chip that implements xHCI. After a PCI reset, VL805's + * firmware may either be loaded directly from an EEPROM or, if + * not present, by the SoC's co-processor, VideoCore. rpi's + * VideoCore OS contains both the non public firmware load + * logic and the VL805 firmware blob. This triggers the + * aforementioned process. + * + * The pci device address is expected is expected by the + * firmware encoded like this: + * + * PCI_BUS << 20 | PCI_SLOT << 15 | PCI_FUNC << 12 + * + * But since rpi's PCIe is hardwired, we know the address in + * advance. + */ + dev_addr = 0x100000; + ret = rpi_firmware_property(priv->fw, RPI_FIRMWARE_NOTIFY_XHCI_RESET, + &dev_addr, sizeof(dev_addr)); + if (ret) + return ret; + + /* Wait for vl805 to startup */ + usleep_range(200, 1000); + break; + + default: + return -EINVAL; + } + + return 0; +} + +static const struct reset_control_ops rpi_reset_ops = { + .reset = rpi_reset_reset, +}; + +static int rpi_reset_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device_node *fw_node; + struct rpi_firmware *fw; + struct rpi_reset *priv; + + fw_node = of_get_parent(dev->of_node); + if (!fw_node) { + dev_err(dev, "Missing firmware node\n"); + return -ENOENT; + } + + fw = rpi_firmware_get(fw_node); + of_node_put(fw_node); + if (!fw) + return -EPROBE_DEFER; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + dev_set_drvdata(dev, priv); + + priv->fw = fw; + priv->rcdev.owner = THIS_MODULE; + priv->rcdev.nr_resets = RASPBERRYPI_FIRMWARE_RESET_NUM_IDS; + priv->rcdev.ops = &rpi_reset_ops; + priv->rcdev.of_node = dev->of_node; + + return devm_reset_controller_register(dev, &priv->rcdev); +} + +static const struct of_device_id rpi_reset_of_match[] = { + { .compatible = "raspberrypi,firmware-reset" }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, rpi_reset_of_match); + +static struct platform_driver rpi_reset_driver = { + .probe = rpi_reset_probe, + .driver = { + .name = "raspberrypi-reset", + .of_match_table = rpi_reset_of_match, + }, +}; +module_platform_driver(rpi_reset_driver); + +MODULE_AUTHOR("Nicolas Saenz Julienne "); +MODULE_DESCRIPTION("Raspberry Pi 4 firmware reset driver"); +MODULE_LICENSE("GPL");