From patchwork Wed Jun 17 22:31:56 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Serge Semin X-Patchwork-Id: 11610879 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 4A239913 for ; Wed, 17 Jun 2020 22:32:29 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 33D942184D for ; Wed, 17 Jun 2020 22:32:29 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1727053AbgFQWcZ (ORCPT ); Wed, 17 Jun 2020 18:32:25 -0400 Received: from mail.baikalelectronics.com ([87.245.175.226]:57376 "EHLO mail.baikalelectronics.ru" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1726909AbgFQWcT (ORCPT ); Wed, 17 Jun 2020 18:32:19 -0400 Received: from localhost (unknown [127.0.0.1]) by mail.baikalelectronics.ru (Postfix) with ESMTP id 3FF1D8030868; Wed, 17 Jun 2020 22:32:12 +0000 (UTC) X-Virus-Scanned: amavisd-new at baikalelectronics.ru Received: from mail.baikalelectronics.ru ([127.0.0.1]) by localhost (mail.baikalelectronics.ru [127.0.0.1]) (amavisd-new, port 10024) with ESMTP id kXQH8iHluOnd; Thu, 18 Jun 2020 01:32:09 +0300 (MSK) From: Serge Semin To: Thomas Gleixner , "Rafael J. Wysocki" , Daniel Lezcano , Thomas Bogendoerfer , Greg Kroah-Hartman , Jason Cooper , Marc Zyngier , Rob Herring CC: Serge Semin , Serge Semin , Rob Herring , Alexey Malahov , , , Subject: [PATCH v4 2/6] dt-bindings: interrupt-controller: Convert mti,gic to DT schema Date: Thu, 18 Jun 2020 01:31:56 +0300 Message-ID: <20200617223201.23259-3-Sergey.Semin@baikalelectronics.ru> In-Reply-To: <20200617223201.23259-1-Sergey.Semin@baikalelectronics.ru> References: <20200617223201.23259-1-Sergey.Semin@baikalelectronics.ru> MIME-Version: 1.0 X-ClientProxiedBy: MAIL.baikal.int (192.168.51.25) To mail (192.168.51.25) Sender: linux-mips-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-mips@vger.kernel.org Modern device tree bindings are supposed to be created as YAML-files in accordance with DT schema. This commit replaces MIPS GIC legacy bare text binding with YAML file. As before the binding file states that the corresponding dts node is supposed to be compatible with MIPS Global Interrupt Controller indicated by the "mti,gic" compatible string and to provide a mandatory interrupt-controller and '#interrupt-cells' properties. There might be optional registers memory range, "mti,reserved-cpu-vectors" and "mti,reserved-ipi-vectors" properties specified. MIPS GIC also includes a free-running global timer, per-CPU count/compare timers, and a watchdog. Since currently the GIC Timer is only supported the DT schema expects an IRQ and clock-phandler charged timer sub-node with "mti,mips-gic-timer" compatible string. Signed-off-by: Serge Semin Reviewed-by: Rob Herring Cc: Alexey Malahov Cc: linux-mips@vger.kernel.org --- I don't really know who is the corresponding driver maintainer, so I added Paul to the maintainers property since he used to be looking for the MIPS arch and Thomas looking after it now. Any idea what email should be specified there instead? Changelog prev: - Since timer sub-node has no unit-address, the node shouldn't be named with one. So alter the MIPS GIC bindings to have a pure "timer" sub-node. - Discard allOf: [ $ref: /schemas/interrupt-controller.yaml# ]. - Since it's a conversion patch use GPL-2.0-only SPDX header. --- .../interrupt-controller/mips-gic.txt | 67 -------- .../interrupt-controller/mti,gic.yaml | 148 ++++++++++++++++++ 2 files changed, 148 insertions(+), 67 deletions(-) delete mode 100644 Documentation/devicetree/bindings/interrupt-controller/mips-gic.txt create mode 100644 Documentation/devicetree/bindings/interrupt-controller/mti,gic.yaml diff --git a/Documentation/devicetree/bindings/interrupt-controller/mips-gic.txt b/Documentation/devicetree/bindings/interrupt-controller/mips-gic.txt deleted file mode 100644 index 173595305e26..000000000000 --- a/Documentation/devicetree/bindings/interrupt-controller/mips-gic.txt +++ /dev/null @@ -1,67 +0,0 @@ -MIPS Global Interrupt Controller (GIC) - -The MIPS GIC routes external interrupts to individual VPEs and IRQ pins. -It also supports local (per-processor) interrupts and software-generated -interrupts which can be used as IPIs. The GIC also includes a free-running -global timer, per-CPU count/compare timers, and a watchdog. - -Required properties: -- compatible : Should be "mti,gic". -- interrupt-controller : Identifies the node as an interrupt controller -- #interrupt-cells : Specifies the number of cells needed to encode an - interrupt specifier. Should be 3. - - The first cell is the type of interrupt, local or shared. - See . - - The second cell is the GIC interrupt number. - - The third cell encodes the interrupt flags. - See for a list of valid - flags. - -Optional properties: -- reg : Base address and length of the GIC registers. If not present, - the base address reported by the hardware GCR_GIC_BASE will be used. -- mti,reserved-cpu-vectors : Specifies the list of CPU interrupt vectors - to which the GIC may not route interrupts. Valid values are 2 - 7. - This property is ignored if the CPU is started in EIC mode. -- mti,reserved-ipi-vectors : Specifies the range of GIC interrupts that are - reserved for IPIs. - It accepts 2 values, the 1st is the starting interrupt and the 2nd is the size - of the reserved range. - If not specified, the driver will allocate the last 2 * number of VPEs in the - system. - -Required properties for timer sub-node: -- compatible : Should be "mti,gic-timer". -- interrupts : Interrupt for the GIC local timer. - -Optional properties for timer sub-node: -- clocks : GIC timer operating clock. -- clock-frequency : Clock frequency at which the GIC timers operate. - -Note that one of clocks or clock-frequency must be specified. - -Example: - - gic: interrupt-controller@1bdc0000 { - compatible = "mti,gic"; - reg = <0x1bdc0000 0x20000>; - - interrupt-controller; - #interrupt-cells = <3>; - - mti,reserved-cpu-vectors = <7>; - mti,reserved-ipi-vectors = <40 8>; - - timer { - compatible = "mti,gic-timer"; - interrupts = ; - clock-frequency = <50000000>; - }; - }; - - uart@18101400 { - ... - interrupt-parent = <&gic>; - interrupts = ; - ... - }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/mti,gic.yaml b/Documentation/devicetree/bindings/interrupt-controller/mti,gic.yaml new file mode 100644 index 000000000000..9f0eb3addac4 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/mti,gic.yaml @@ -0,0 +1,148 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interrupt-controller/mti,gic.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MIPS Global Interrupt Controller + +maintainers: + - Paul Burton + - Thomas Bogendoerfer + +description: | + The MIPS GIC routes external interrupts to individual VPEs and IRQ pins. + It also supports local (per-processor) interrupts and software-generated + interrupts which can be used as IPIs. The GIC also includes a free-running + global timer, per-CPU count/compare timers, and a watchdog. + +properties: + compatible: + const: mti,gic + + "#interrupt-cells": + const: 3 + description: | + The 1st cell is the type of interrupt: local or shared defined in the + file 'dt-bindings/interrupt-controller/mips-gic.h'. The 2nd cell is the + GIC interrupt number. The 3d cell encodes the interrupt flags setting up + the IRQ trigger modes, which are defined in the file + 'dt-bindings/interrupt-controller/irq.h'. + + reg: + description: | + Base address and length of the GIC registers space. If not present, + the base address reported by the hardware GCR_GIC_BASE will be used. + maxItems: 1 + + interrupt-controller: true + + mti,reserved-cpu-vectors: + description: | + Specifies the list of CPU interrupt vectors to which the GIC may not + route interrupts. This property is ignored if the CPU is started in EIC + mode. + allOf: + - $ref: /schemas/types.yaml#definitions/uint32-array + - minItems: 1 + maxItems: 6 + uniqueItems: true + items: + minimum: 2 + maximum: 7 + + mti,reserved-ipi-vectors: + description: | + Specifies the range of GIC interrupts that are reserved for IPIs. + It accepts two values: the 1st is the starting interrupt and the 2nd is + the size of the reserved range. If not specified, the driver will + allocate the last (2 * number of VPEs in the system). + allOf: + - $ref: /schemas/types.yaml#definitions/uint32-array + - items: + - minimum: 0 + maximum: 254 + - minimum: 2 + maximum: 254 + + timer: + type: object + description: | + MIPS GIC includes a free-running global timer, per-CPU count/compare + timers, and a watchdog. Currently only the GIC Timer is supported. + properties: + compatible: + const: mti,gic-timer + + interrupts: + description: | + Interrupt for the GIC local timer, so normally it's suppose to be of + format. + maxItems: 1 + + clocks: + maxItems: 1 + + clock-frequency: true + + required: + - compatible + - interrupts + + oneOf: + - required: + - clocks + - required: + - clock-frequency + + additionalProperties: false + +unevaluatedProperties: false + +required: + - compatible + - "#interrupt-cells" + - interrupt-controller + +examples: + - | + #include + #include + + interrupt-controller@1bdc0000 { + compatible = "mti,gic"; + reg = <0x1bdc0000 0x20000>; + interrupt-controller; + #interrupt-cells = <3>; + mti,reserved-cpu-vectors = <7>; + mti,reserved-ipi-vectors = <40 8>; + + timer { + compatible = "mti,gic-timer"; + interrupts = ; + clock-frequency = <50000000>; + }; + }; + - | + #include + #include + + interrupt-controller@1bdc0000 { + compatible = "mti,gic"; + reg = <0x1bdc0000 0x20000>; + interrupt-controller; + #interrupt-cells = <3>; + + timer { + compatible = "mti,gic-timer"; + interrupts = ; + clocks = <&cpu_pll>; + }; + }; + - | + interrupt-controller { + compatible = "mti,gic"; + interrupt-controller; + #interrupt-cells = <3>; + }; +...