From patchwork Thu Jun 25 17:37:14 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: Zhou Yanjie X-Patchwork-Id: 11625809 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 2CF3914B7 for ; Thu, 25 Jun 2020 17:38:01 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 189F8206BE for ; Thu, 25 Jun 2020 17:38:01 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S2406839AbgFYRhy (ORCPT ); Thu, 25 Jun 2020 13:37:54 -0400 Received: from out28-49.mail.aliyun.com ([115.124.28.49]:55189 "EHLO out28-49.mail.aliyun.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S2405219AbgFYRhw (ORCPT ); Thu, 25 Jun 2020 13:37:52 -0400 X-Alimail-AntiSpam: AC=CONTINUE;BC=0.07436311|-1;CH=green;DM=|CONTINUE|false|;DS=CONTINUE|ham_system_inform|0.0292448-0.0134207-0.957335;FP=0|0|0|0|0|-1|-1|-1;HT=e02c03279;MF=zhouyanjie@wanyeetech.com;NM=1;PH=DS;RN=15;RT=15;SR=0;TI=SMTPD_---.HsRfZK5_1593106660; Received: from localhost.localdomain(mailfrom:zhouyanjie@wanyeetech.com fp:SMTPD_---.HsRfZK5_1593106660) by smtp.aliyun-inc.com(10.147.41.231); Fri, 26 Jun 2020 01:37:46 +0800 From: =?utf-8?b?5ZGo55Cw5p2wIChaaG91IFlhbmppZSk=?= To: linux-mips@vger.kernel.org Cc: linux-kernel@vger.kernel.org, devicetree@vger.kernel.org, paul.burton@mips.com, paul@crapouillou.net, robh+dt@kernel.org, tsbogend@alpha.franken.de, ak@linux.intel.com, ebiederm@xmission.com, dongsheng.qiu@ingenic.com, aric.pzqi@ingenic.com, rick.tyliu@ingenic.com, yanfei.li@ingenic.com, sernia.zhou@foxmail.com, zhenwenjin@gmail.com Subject: [PATCH v2 1/3] MIPS: Ingenic: Add Ingenic X1830 support. Date: Fri, 26 Jun 2020 01:37:14 +0800 Message-Id: <20200625173716.56146-2-zhouyanjie@wanyeetech.com> X-Mailer: git-send-email 2.11.0 In-Reply-To: <20200625173716.56146-1-zhouyanjie@wanyeetech.com> References: <20200625173716.56146-1-zhouyanjie@wanyeetech.com> MIME-Version: 1.0 Sender: linux-mips-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-mips@vger.kernel.org Support the Ingenic X1830 SoC using the code under arch/mips/jz4740. This is left unselectable in Kconfig until a X1830 based board is added in a later commit. Tested-by: 周正 (Zhou Zheng) Signed-off-by: 周琰杰 (Zhou Yanjie) --- Notes: v1->v2: No change. arch/mips/boot/dts/ingenic/x1830.dtsi | 300 ++++++++++++++++++++++++++++++++++ arch/mips/jz4740/Kconfig | 6 + 2 files changed, 306 insertions(+) create mode 100644 arch/mips/boot/dts/ingenic/x1830.dtsi diff --git a/arch/mips/boot/dts/ingenic/x1830.dtsi b/arch/mips/boot/dts/ingenic/x1830.dtsi new file mode 100644 index 000000000000..6d2d6f227b45 --- /dev/null +++ b/arch/mips/boot/dts/ingenic/x1830.dtsi @@ -0,0 +1,300 @@ +// SPDX-License-Identifier: GPL-2.0 +#include +#include +#include + +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "ingenic,x1830"; + + cpuintc: interrupt-controller { + #address-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; + compatible = "mti,cpu-interrupt-controller"; + }; + + intc: interrupt-controller@10001000 { + compatible = "ingenic,x1830-intc", "ingenic,jz4780-intc"; + reg = <0x10001000 0x50>; + + interrupt-controller; + #interrupt-cells = <1>; + + interrupt-parent = <&cpuintc>; + interrupts = <2>; + }; + + exclk: ext { + compatible = "fixed-clock"; + #clock-cells = <0>; + }; + + rtclk: rtc { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + + cgu: x1830-cgu@10000000 { + compatible = "ingenic,x1830-cgu"; + reg = <0x10000000 0x100>; + + #clock-cells = <1>; + + clocks = <&exclk>, <&rtclk>; + clock-names = "ext", "rtc"; + }; + + tcu: timer@10002000 { + compatible = "ingenic,x1830-tcu", "ingenic,x1000-tcu", "simple-mfd"; + reg = <0x10002000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x10002000 0x1000>; + + #clock-cells = <1>; + + clocks = <&cgu X1830_CLK_RTCLK + &cgu X1830_CLK_EXCLK + &cgu X1830_CLK_PCLK>; + clock-names = "rtc", "ext", "pclk"; + + interrupt-controller; + #interrupt-cells = <1>; + + interrupt-parent = <&intc>; + interrupts = <27 26 25>; + + wdt: watchdog@0 { + compatible = "ingenic,x1830-watchdog", "ingenic,jz4780-watchdog"; + reg = <0x0 0x10>; + + clocks = <&tcu TCU_CLK_WDT>; + clock-names = "wdt"; + }; + }; + + rtc: rtc@10003000 { + compatible = "ingenic,x1830-rtc", "ingenic,jz4780-rtc"; + reg = <0x10003000 0x4c>; + + interrupt-parent = <&intc>; + interrupts = <32>; + + clocks = <&cgu X1830_CLK_RTCLK>; + clock-names = "rtc"; + }; + + pinctrl: pin-controller@10010000 { + compatible = "ingenic,x1830-pinctrl"; + reg = <0x10010000 0x800>; + #address-cells = <1>; + #size-cells = <0>; + + gpa: gpio@0 { + compatible = "ingenic,x1830-gpio"; + reg = <0>; + + gpio-controller; + gpio-ranges = <&pinctrl 0 0 32>; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + + interrupt-parent = <&intc>; + interrupts = <17>; + }; + + gpb: gpio@1 { + compatible = "ingenic,x1830-gpio"; + reg = <1>; + + gpio-controller; + gpio-ranges = <&pinctrl 0 32 32>; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + + interrupt-parent = <&intc>; + interrupts = <16>; + }; + + gpc: gpio@2 { + compatible = "ingenic,x1830-gpio"; + reg = <2>; + + gpio-controller; + gpio-ranges = <&pinctrl 0 64 32>; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + + interrupt-parent = <&intc>; + interrupts = <15>; + }; + + gpd: gpio@3 { + compatible = "ingenic,x1830-gpio"; + reg = <3>; + + gpio-controller; + gpio-ranges = <&pinctrl 0 96 32>; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + + interrupt-parent = <&intc>; + interrupts = <14>; + }; + }; + + i2c0: i2c-controller@10050000 { + compatible = "ingenic,x1830-i2c", "ingenic,x1000-i2c"; + reg = <0x10050000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + + interrupt-parent = <&intc>; + interrupts = <60>; + + clocks = <&cgu X1830_CLK_SMB0>; + + status = "disabled"; + }; + + i2c1: i2c-controller@10051000 { + compatible = "ingenic,x1830-i2c", "ingenic,x1000-i2c"; + reg = <0x10051000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + + interrupt-parent = <&intc>; + interrupts = <59>; + + clocks = <&cgu X1830_CLK_SMB1>; + + status = "disabled"; + }; + + i2c2: i2c-controller@10052000 { + compatible = "ingenic,x1830-i2c", "ingenic,x1000-i2c"; + reg = <0x10052000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + + interrupt-parent = <&intc>; + interrupts = <58>; + + clocks = <&cgu X1830_CLK_SMB2>; + + status = "disabled"; + }; + + uart0: serial@10030000 { + compatible = "ingenic,x1830-uart", "ingenic,x1000-uart"; + reg = <0x10030000 0x100>; + + interrupt-parent = <&intc>; + interrupts = <51>; + + clocks = <&exclk>, <&cgu X1830_CLK_UART0>; + clock-names = "baud", "module"; + + status = "disabled"; + }; + + uart1: serial@10031000 { + compatible = "ingenic,x1830-uart", "ingenic,x1000-uart"; + reg = <0x10031000 0x100>; + + interrupt-parent = <&intc>; + interrupts = <50>; + + clocks = <&exclk>, <&cgu X1830_CLK_UART1>; + clock-names = "baud", "module"; + + status = "disabled"; + }; + + pdma: dma-controller@13420000 { + compatible = "ingenic,x1830-dma"; + reg = <0x13420000 0x400 + 0x13421000 0x40>; + #dma-cells = <2>; + + interrupt-parent = <&intc>; + interrupts = <10>; + + clocks = <&cgu X1830_CLK_PDMA>; + }; + + mac: ethernet@134b0000 { + compatible = "ingenic,x1830-mac", "snps,dwmac"; + reg = <0x134b0000 0x2000>; + + interrupt-parent = <&intc>; + interrupts = <55>; + interrupt-names = "macirq"; + + clocks = <&cgu X1830_CLK_MAC>; + clock-names = "stmmaceth"; + + status = "disabled"; + + mdio: mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + }; + + msc0: mmc@13450000 { + compatible = "ingenic,x1830-mmc", "ingenic,x1000-mmc"; + reg = <0x13450000 0x1000>; + + interrupt-parent = <&intc>; + interrupts = <37>; + + clocks = <&cgu X1830_CLK_MSC0>; + clock-names = "mmc"; + + cap-sd-highspeed; + cap-mmc-highspeed; + cap-sdio-irq; + + dmas = <&pdma X1830_DMA_MSC0_RX 0xffffffff>, + <&pdma X1830_DMA_MSC0_TX 0xffffffff>; + dma-names = "rx", "tx"; + + status = "disabled"; + }; + + msc1: mmc@13460000 { + compatible = "ingenic,x1830-mmc", "ingenic,x1000-mmc"; + reg = <0x13460000 0x1000>; + + interrupt-parent = <&intc>; + interrupts = <36>; + + clocks = <&cgu X1830_CLK_MSC1>; + clock-names = "mmc"; + + cap-sd-highspeed; + cap-mmc-highspeed; + cap-sdio-irq; + + dmas = <&pdma X1830_DMA_MSC1_RX 0xffffffff>, + <&pdma X1830_DMA_MSC1_TX 0xffffffff>; + dma-names = "rx", "tx"; + + status = "disabled"; + }; +}; diff --git a/arch/mips/jz4740/Kconfig b/arch/mips/jz4740/Kconfig index 9c2e8c15bb97..cd0ddb52da99 100644 --- a/arch/mips/jz4740/Kconfig +++ b/arch/mips/jz4740/Kconfig @@ -50,3 +50,9 @@ config MACH_X1000 select MIPS_CPU_SCACHE select SYS_HAS_CPU_MIPS32_R2 select SYS_SUPPORTS_HIGHMEM + +config MACH_X1830 + bool + select MIPS_CPU_SCACHE + select SYS_HAS_CPU_MIPS32_R2 + select SYS_SUPPORTS_HIGHMEM