spi: img-spfi: Convert to use GPIO descriptors

Commit Message

Linus Walleij June 25, 2020, 8:14 p.m. UTC

This converts the IMG SPFI SPI driver to use GPIO descriptors
as obtained from the core instead of GPIO numbers.

The driver was already relying on the core code to look up
the GPIO numbers from the device tree and allocate memory for
storing state etc. By moving to use descriptors handled by
the core we can delete the setup/cleanup functions and
the device state handler that were only dealing with this.

Cc: Ionela Voinescu <[e-mail]>
Cc: Sifan Naeem <[e-mail]>
Signed-off-by: Linus Walleij <[e-mail]>
---
 drivers/spi/spi-img-spfi.c | 56 +-------------------------------------
 1 file changed, 1 insertion(+), 55 deletions(-)

Comments

Mark Brown July 1, 2020, 10:24 p.m. UTC | #1

On Thu, 25 Jun 2020 22:14:22 +0200, Linus Walleij wrote:
> This converts the IMG SPFI SPI driver to use GPIO descriptors
> as obtained from the core instead of GPIO numbers.
> 
> The driver was already relying on the core code to look up
> the GPIO numbers from the device tree and allocate memory for
> storing state etc. By moving to use descriptors handled by
> the core we can delete the setup/cleanup functions and
> the device state handler that were only dealing with this.

Applied to

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git for-next

Thanks!

[1/1] spi: img-spfi: Convert to use GPIO descriptors
      commit: 27e23ca806c6fe08613330bb35e1f502ffd2d3a8

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

Patch

diff --git a/drivers/spi/spi-img-spfi.c b/drivers/spi/spi-img-spfi.c
index 8543f5ed1099..b068537375d6 100644
--- a/drivers/spi/spi-img-spfi.c
+++ b/drivers/spi/spi-img-spfi.c
@@ -9,7 +9,6 @@ 
 #include <linux/clk.h>
 #include <linux/delay.h>
 #include <linux/dmaengine.h>
-#include <linux/gpio.h>
 #include <linux/interrupt.h>
 #include <linux/io.h>
 #include <linux/irq.h>
@@ -102,10 +101,6 @@  struct img_spfi {
 	bool rx_dma_busy;
 };
 
-struct img_spfi_device_data {
-	bool gpio_requested;
-};
-
 static inline u32 spfi_readl(struct img_spfi *spfi, u32 reg)
 {
 	return readl(spfi->regs + reg);
@@ -442,54 +437,6 @@  static int img_spfi_unprepare(struct spi_master *master,
 	return 0;
 }
 
-static int img_spfi_setup(struct spi_device *spi)
-{
-	int ret = -EINVAL;
-	struct img_spfi_device_data *spfi_data = spi_get_ctldata(spi);
-
-	if (!spfi_data) {
-		spfi_data = kzalloc(sizeof(*spfi_data), GFP_KERNEL);
-		if (!spfi_data)
-			return -ENOMEM;
-		spfi_data->gpio_requested = false;
-		spi_set_ctldata(spi, spfi_data);
-	}
-	if (!spfi_data->gpio_requested) {
-		ret = gpio_request_one(spi->cs_gpio,
-				       (spi->mode & SPI_CS_HIGH) ?
-				       GPIOF_OUT_INIT_LOW : GPIOF_OUT_INIT_HIGH,
-				       dev_name(&spi->dev));
-		if (ret)
-			dev_err(&spi->dev, "can't request chipselect gpio %d\n",
-				spi->cs_gpio);
-		else
-			spfi_data->gpio_requested = true;
-	} else {
-		if (gpio_is_valid(spi->cs_gpio)) {
-			int mode = ((spi->mode & SPI_CS_HIGH) ?
-				    GPIOF_OUT_INIT_LOW : GPIOF_OUT_INIT_HIGH);
-
-			ret = gpio_direction_output(spi->cs_gpio, mode);
-			if (ret)
-				dev_err(&spi->dev, "chipselect gpio %d setup failed (%d)\n",
-					spi->cs_gpio, ret);
-		}
-	}
-	return ret;
-}
-
-static void img_spfi_cleanup(struct spi_device *spi)
-{
-	struct img_spfi_device_data *spfi_data = spi_get_ctldata(spi);
-
-	if (spfi_data) {
-		if (spfi_data->gpio_requested)
-			gpio_free(spi->cs_gpio);
-		kfree(spfi_data);
-		spi_set_ctldata(spi, NULL);
-	}
-}
-
 static void img_spfi_config(struct spi_master *master, struct spi_device *spi,
 			    struct spi_transfer *xfer)
 {
@@ -659,12 +606,11 @@  static int img_spfi_probe(struct platform_device *pdev)
 			master->max_speed_hz = max_speed_hz;
 	}
 
-	master->setup = img_spfi_setup;
-	master->cleanup = img_spfi_cleanup;
 	master->transfer_one = img_spfi_transfer_one;
 	master->prepare_message = img_spfi_prepare;
 	master->unprepare_message = img_spfi_unprepare;
 	master->handle_err = img_spfi_handle_err;
+	master->use_gpio_descriptors = true;
 
 	spfi->tx_ch = dma_request_chan(spfi->dev, "tx");
 	if (IS_ERR(spfi->tx_ch)) {