diff mbox series

[v5,9/9] clocksource/drivers/timer-atmel-tcb: add sama5d2 support

Message ID 20200625214312.1382063-10-alexandre.belloni@bootlin.com (mailing list archive)
State New, archived
Headers show
Series clocksource/drivers/timer-atmel-tcb: add sama5d2 support | expand

Commit Message

Alexandre Belloni June 25, 2020, 9:43 p.m. UTC
The first divisor for the sama5d2 is actually the gclk selector. Because
the currently remaining divisors are fitting the use case, currently ensure
it is skipped.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
---
 drivers/clocksource/timer-atmel-tcb.c | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/drivers/clocksource/timer-atmel-tcb.c b/drivers/clocksource/timer-atmel-tcb.c
index ccb77b9cb489..e373b02d509a 100644
--- a/drivers/clocksource/timer-atmel-tcb.c
+++ b/drivers/clocksource/timer-atmel-tcb.c
@@ -359,9 +359,15 @@  static struct atmel_tcb_config tcb_sam9x5_config = {
 	.counter_width = 32,
 };
 
+static struct atmel_tcb_config tcb_sama5d2_config = {
+	.counter_width = 32,
+	.has_gclk = 1,
+};
+
 static const struct of_device_id atmel_tcb_of_match[] = {
 	{ .compatible = "atmel,at91rm9200-tcb", .data = &tcb_rm9200_config, },
 	{ .compatible = "atmel,at91sam9x5-tcb", .data = &tcb_sam9x5_config, },
+	{ .compatible = "atmel,sama5d2-tcb", .data = &tcb_sama5d2_config, },
 	{ /* sentinel */ }
 };
 
@@ -426,7 +432,10 @@  static int __init tcb_clksrc_init(struct device_node *node)
 
 	/* How fast will we be counting?  Pick something over 5 MHz.  */
 	rate = (u32) clk_get_rate(t0_clk);
-	for (i = 0; i < ARRAY_SIZE(atmel_tcb_divisors); i++) {
+	i = 0;
+	if (tc.tcb_config->has_gclk)
+		i = 1;
+	for (; i < ARRAY_SIZE(atmel_tcb_divisors); i++) {
 		unsigned divisor = atmel_tcb_divisors[i];
 		unsigned tmp;