diff mbox series

[TEGRA194_CPUFREQ,v4,1/4] dt-bindings: arm: Add t194 ccplex compatible and bpmp property

Message ID 1593186236-12760-2-git-send-email-sumitg@nvidia.com (mailing list archive)
State New, archived
Headers show
Series Add cpufreq driver for Tegra194 | expand

Commit Message

Sumit Gupta June 26, 2020, 3:43 p.m. UTC
To do frequency scaling on all CPUs within T194 CPU Complex, we need
to query BPMP for data on valid operating points. Document a compatible
string under 'cpus' node to represent the CPU Complex for binding drivers
like cpufreq which don't have their node or CPU Complex node to bind to.
Also, document a property to point to the BPMP device that can be queried
for all CPUs.

Signed-off-by: Sumit Gupta <sumitg@nvidia.com>
---
 Documentation/devicetree/bindings/arm/cpus.yaml | 9 +++++++++
 1 file changed, 9 insertions(+)

Comments

Michał Mirosław June 26, 2020, 4:04 p.m. UTC | #1
On Fri, Jun 26, 2020 at 09:13:53PM +0530, Sumit Gupta wrote:
> To do frequency scaling on all CPUs within T194 CPU Complex, we need
> to query BPMP for data on valid operating points. Document a compatible
> string under 'cpus' node to represent the CPU Complex for binding drivers
> like cpufreq which don't have their node or CPU Complex node to bind to.
> Also, document a property to point to the BPMP device that can be queried
> for all CPUs.
> 
> Signed-off-by: Sumit Gupta <sumitg@nvidia.com>
> ---
>  Documentation/devicetree/bindings/arm/cpus.yaml | 9 +++++++++
>  1 file changed, 9 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/arm/cpus.yaml b/Documentation/devicetree/bindings/arm/cpus.yaml
> index a018147..737b55e 100644
> --- a/Documentation/devicetree/bindings/arm/cpus.yaml
> +++ b/Documentation/devicetree/bindings/arm/cpus.yaml
> @@ -162,6 +162,7 @@ properties:
>        - nvidia,tegra132-denver
>        - nvidia,tegra186-denver
>        - nvidia,tegra194-carmel
> +      - nvidia,tegra194-ccplex
>        - qcom,krait
>        - qcom,kryo
>        - qcom,kryo260
> @@ -255,6 +256,14 @@ properties:
>  
>        where voltage is in V, frequency is in MHz.
>  
> +  nvidia,bpmp:
> +    $ref: '/schemas/types.yaml#/definitions/phandle'
> +    descrption: |
> +      Specifies the bpmp node that needs to be queried to get
> +      operating point data for all CPUs.
> +
> +      Optional for NVIDIA Tegra194 Carmel CPUs

Hi,

The code (next patches) suggests, that the property is relevant for Tegra194
only. If it is required for compatible=tegra194-ccplex, then maybe you can
mark it so (there is already similar constraint described in the file, just
before the example section).

Best Regards,
Michał Mirosław
Rob Herring (Arm) June 29, 2020, 10:06 p.m. UTC | #2
On Fri, 26 Jun 2020 21:13:53 +0530, Sumit Gupta wrote:
> To do frequency scaling on all CPUs within T194 CPU Complex, we need
> to query BPMP for data on valid operating points. Document a compatible
> string under 'cpus' node to represent the CPU Complex for binding drivers
> like cpufreq which don't have their node or CPU Complex node to bind to.
> Also, document a property to point to the BPMP device that can be queried
> for all CPUs.
> 
> Signed-off-by: Sumit Gupta <sumitg@nvidia.com>
> ---
>  Documentation/devicetree/bindings/arm/cpus.yaml | 9 +++++++++
>  1 file changed, 9 insertions(+)
> 


My bot found errors running 'make dt_binding_check' on your patch:

/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/arm/cpus.yaml: properties:nvidia,bpmp: Additional properties are not allowed ('descrption' was unexpected)
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/arm/cpus.yaml: properties:nvidia,bpmp: 'descrption' is not one of ['$ref', 'additionalItems', 'additionalProperties', 'allOf', 'anyOf', 'const', 'contains', 'default', 'dependencies', 'deprecated', 'description', 'else', 'enum', 'exclusiveMaximum', 'exclusiveMinimum', 'items', 'if', 'minItems', 'minimum', 'maxItems', 'maximum', 'multipleOf', 'not', 'oneOf', 'pattern', 'patternProperties', 'properties', 'required', 'then', 'type', 'typeSize', 'unevaluatedProperties', 'uniqueItems']
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/arm/cpus.yaml: properties:nvidia,bpmp: {'$ref': '/schemas/types.yaml#/definitions/phandle', 'descrption': 'Specifies the bpmp node that needs to be queried to get\noperating point data for all CPUs.\n\nOptional for NVIDIA Tegra194 Carmel CPUs\n'} is not valid under any of the given schemas (Possible causes of the failure):
	/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/arm/cpus.yaml: properties:nvidia,bpmp: 'description' is a required property

Documentation/devicetree/bindings/Makefile:20: recipe for target 'Documentation/devicetree/bindings/arm/cpus.example.dts' failed
make[1]: *** [Documentation/devicetree/bindings/arm/cpus.example.dts] Error 1
make[1]: *** Waiting for unfinished jobs....
Makefile:1347: recipe for target 'dt_binding_check' failed
make: *** [dt_binding_check] Error 2


See https://patchwork.ozlabs.org/patch/1317775

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure dt-schema is up to date:

pip3 install git+https://github.com/devicetree-org/dt-schema.git@master --upgrade

Please check and re-submit.
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/arm/cpus.yaml b/Documentation/devicetree/bindings/arm/cpus.yaml
index a018147..737b55e 100644
--- a/Documentation/devicetree/bindings/arm/cpus.yaml
+++ b/Documentation/devicetree/bindings/arm/cpus.yaml
@@ -162,6 +162,7 @@  properties:
       - nvidia,tegra132-denver
       - nvidia,tegra186-denver
       - nvidia,tegra194-carmel
+      - nvidia,tegra194-ccplex
       - qcom,krait
       - qcom,kryo
       - qcom,kryo260
@@ -255,6 +256,14 @@  properties:
 
       where voltage is in V, frequency is in MHz.
 
+  nvidia,bpmp:
+    $ref: '/schemas/types.yaml#/definitions/phandle'
+    descrption: |
+      Specifies the bpmp node that needs to be queried to get
+      operating point data for all CPUs.
+
+      Optional for NVIDIA Tegra194 Carmel CPUs
+
   power-domains:
     $ref: '/schemas/types.yaml#/definitions/phandle-array'
     description: