[v5,6/8] clk: clock-wizard: Remove the hardcoding of the clock outputs

Commit Message

Shubhrajyoti Datta June 26, 2020, 6:46 p.m. UTC

The number of output clocks are configurable in the hardware.
Currently the driver registers the maximum number of outputs.
Fix the same by registering only the outputs that are there.

Signed-off-by: Shubhrajyoti Datta <[e-mail]>
---
v4:
Assign output in this patch

 drivers/clk/clk-xlnx-clock-wizard.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

Patch

diff --git a/drivers/clk/clk-xlnx-clock-wizard.c b/drivers/clk/clk-xlnx-clock-wizard.c
index 1cf381c..0c57ca0 100644
--- a/drivers/clk/clk-xlnx-clock-wizard.c
+++ b/drivers/clk/clk-xlnx-clock-wizard.c
@@ -495,6 +495,7 @@  static int clk_wzrd_probe(struct platform_device *pdev)
 	const char *clk_name;
 	struct clk_wzrd *clk_wzrd;
 	struct resource *mem;
+	int outputs;
 	struct device_node *np = pdev->dev.of_node;
 
 	clk_wzrd = devm_kzalloc(&pdev->dev, sizeof(*clk_wzrd), GFP_KERNEL);
@@ -565,6 +566,7 @@  static int clk_wzrd_probe(struct platform_device *pdev)
 		goto err_disable_clk;
 	}
 
+	outputs = of_property_count_strings(np, "clock-output-names");
 	/* register div */
 	reg = (readl(clk_wzrd->base + WZRD_CLK_CFG_REG(0)) &
 			WZRD_DIVCLK_DIVIDE_MASK) >> WZRD_DIVCLK_DIVIDE_SHIFT;
@@ -586,7 +588,7 @@  static int clk_wzrd_probe(struct platform_device *pdev)
 	}
 
 	/* register div per output */
-	for (i = WZRD_NUM_OUTPUTS - 1; i >= 0 ; i--) {
+	for (i = outputs - 1; i >= 0 ; i--) {
 		const char *clkout_name;
 
 		if (of_property_read_string_index(np, "clock-output-names", i,
@@ -617,7 +619,7 @@  static int clk_wzrd_probe(struct platform_device *pdev)
 		if (IS_ERR(clk_wzrd->clkout[i])) {
 			int j;
 
-			for (j = i + 1; j < WZRD_NUM_OUTPUTS; j++)
+			for (j = i + 1; j < outputs; j++)
 				clk_unregister(clk_wzrd->clkout[j]);
 			dev_err(&pdev->dev,
 				"unable to register divider clock\n");