diff mbox series

[alsa-lib,4/5] cht-bsw-rt5672: Boost ADC volume a bit

Message ID 20200628174421.115133-4-hdegoede@redhat.com (mailing list archive)
State New, archived
Headers show
Series [alsa-lib,1/5] Fix invalid "Regex" Type in various Condition blocks | expand

Commit Message

Hans de Goede June 28, 2020, 5:44 p.m. UTC
Both the DMICs and the headset mic are quite soft, even with the 20 dB
IN1 boost we already congfigure for the headset.

This commit sets the ADC Boost gain (range 0-3) to 1 = 12 dB, which makes
the volume a lot better. The next step of the ADC Boost gain setting is
24 dB which is a bit too much.

This has been tested with both the builtin DMIC and with a headset mic
on the following devices:

Lenovo Miix 2 10
Lenovo Thinkpad 8
Lenovo Thinkpad 10 (gen 1)

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
 ucm2/codecs/rt5672/EnableSeq.conf | 5 +++++
 1 file changed, 5 insertions(+)
diff mbox series

Patch

diff --git a/ucm2/codecs/rt5672/EnableSeq.conf b/ucm2/codecs/rt5672/EnableSeq.conf
index a19a982..ddfb1c7 100644
--- a/ucm2/codecs/rt5672/EnableSeq.conf
+++ b/ucm2/codecs/rt5672/EnableSeq.conf
@@ -30,6 +30,11 @@  EnableSequence [
 	cset "name='ADC Capture Volume' 47"
 	cset "name='ADC Capture Switch' on"
 
+	# Both the DMICs and the headset mic (even with the 20 dB boost below)
+	# are quite soft, set the ADC Boost gain (range 0-3) to 1 = 12 dB the
+	# next step is 24 dB which is a bit too much
+	cset "name='STO1 ADC Boost Gain Volume' 1"
+
 	# Headset mic is quite soft, boost it a bit, 1 = 20dB which is the first
 	# available boost step
 	cset "name='IN1 Boost Volume' 1"