diff mbox series

[v7,08/13] drm/panel: st7703: Move generic part of init sequence to enable callback

Message ID 20200701162928.1638874-9-megous@megous.com (mailing list archive)
State New, archived
Headers show
Series Add support for PinePhone LCD panel | expand

Commit Message

Ondřej Jirman July 1, 2020, 4:29 p.m. UTC
Calling sleep out and display on is a controller specific part
of the initialization process. Move it out of the panel specific
initialization function to the enable callback.

Signed-off-by: Ondrej Jirman <megous@megous.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
---
 drivers/gpu/drm/panel/panel-sitronix-st7703.c | 33 ++++++++++---------
 1 file changed, 18 insertions(+), 15 deletions(-)
diff mbox series

Patch

diff --git a/drivers/gpu/drm/panel/panel-sitronix-st7703.c b/drivers/gpu/drm/panel/panel-sitronix-st7703.c
index 61872f623fff..96e39ec94900 100644
--- a/drivers/gpu/drm/panel/panel-sitronix-st7703.c
+++ b/drivers/gpu/drm/panel/panel-sitronix-st7703.c
@@ -84,8 +84,6 @@  static inline struct st7703 *panel_to_st7703(struct drm_panel *panel)
 static int jh057n_init_sequence(struct st7703 *ctx)
 {
 	struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
-	struct device *dev = ctx->dev;
-	int ret;
 
 	/*
 	 * Init sequence was supplied by the panel vendor. Most of the commands
@@ -136,20 +134,7 @@  static int jh057n_init_sequence(struct st7703 *ctx)
 			      0x18, 0x00, 0x09, 0x0E, 0x29, 0x2D, 0x3C, 0x41,
 			      0x37, 0x07, 0x0B, 0x0D, 0x10, 0x11, 0x0F, 0x10,
 			      0x11, 0x18);
-	msleep(20);
-
-	ret = mipi_dsi_dcs_exit_sleep_mode(dsi);
-	if (ret < 0) {
-		DRM_DEV_ERROR(dev, "Failed to exit sleep mode: %d\n", ret);
-		return ret;
-	}
-	/* Panel is operational 120 msec after reset */
-	msleep(60);
-	ret = mipi_dsi_dcs_set_display_on(dsi);
-	if (ret)
-		return ret;
 
-	DRM_DEV_DEBUG_DRIVER(dev, "Panel init sequence done\n");
 	return 0;
 }
 
@@ -180,6 +165,7 @@  struct st7703_panel_desc jh057n00900_panel_desc = {
 static int st7703_enable(struct drm_panel *panel)
 {
 	struct st7703 *ctx = panel_to_st7703(panel);
+	struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
 	int ret;
 
 	ret = ctx->desc->init_sequence(ctx);
@@ -189,6 +175,23 @@  static int st7703_enable(struct drm_panel *panel)
 		return ret;
 	}
 
+	msleep(20);
+
+	ret = mipi_dsi_dcs_exit_sleep_mode(dsi);
+	if (ret < 0) {
+		DRM_DEV_ERROR(ctx->dev, "Failed to exit sleep mode: %d\n", ret);
+		return ret;
+	}
+
+	/* Panel is operational 120 msec after reset */
+	msleep(60);
+
+	ret = mipi_dsi_dcs_set_display_on(dsi);
+	if (ret)
+		return ret;
+
+	DRM_DEV_DEBUG_DRIVER(ctx->dev, "Panel init sequence done\n");
+
 	return 0;
 }