Revert "drm/i915/dp: Correctly advertise HBR3 for GEN11+"
diff mbox series

Message ID 20200702221818.29094-1-matthew.s.atwood@intel.com
State New
Headers show
Series
  • Revert "drm/i915/dp: Correctly advertise HBR3 for GEN11+"
Related show

Commit Message

Matt Atwood July 2, 2020, 10:18 p.m. UTC
The initial CI results did not include a TGL system which includes a
panel that is having issues with patch. Revert while we triage.

This reverts commit 680c45c767f63e35f063d3ea04f388a9f7ae7079.
---
 drivers/gpu/drm/i915/display/intel_dp.c | 28 +++++++++++++++----------
 1 file changed, 17 insertions(+), 11 deletions(-)

Comments

Souza, Jose July 2, 2020, 10:34 p.m. UTC | #1
On Thu, 2020-07-02 at 15:18 -0700, Matt Atwood wrote:
> The initial CI results did not include a TGL system which includes a
> panel that is having issues with patch. Revert while we triage.
> 
> This reverts commit 680c45c767f63e35f063d3ea04f388a9f7ae7079.

Missing the Signed-off-by line also the commit references should follow this format "2850748ef876 ("drm/i915: Pull i915_vma_pin under the vm-
>mutex")".
Please CC me in the updated version.

> ---
>  drivers/gpu/drm/i915/display/intel_dp.c | 28 +++++++++++++++----------
>  1 file changed, 17 insertions(+), 11 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
> index a5ab405d3a12..d6295eb20b63 100644
> --- a/drivers/gpu/drm/i915/display/intel_dp.c
> +++ b/drivers/gpu/drm/i915/display/intel_dp.c
> @@ -137,8 +137,6 @@ static const u8 valid_dsc_slicecount[] = {1, 2, 4};
>   *
>   * If a CPU or PCH DP output is attached to an eDP panel, this function
>   * will return true, and false otherwise.
> - *
> - * This function is not safe to use prior to encoder type being set.
>   */
>  bool intel_dp_is_edp(struct intel_dp *intel_dp)
>  {
> @@ -8159,6 +8157,8 @@ intel_dp_init_connector(struct intel_digital_port *dig_port,
>  		     intel_encoder->base.name))
>  		return false;
>  
> +	intel_dp_set_source_rates(intel_dp);
> +
>  	intel_dp->reset_link_params = true;
>  	intel_dp->pps_pipe = INVALID_PIPE;
>  	intel_dp->active_pipe = INVALID_PIPE;
> @@ -8174,22 +8174,28 @@ intel_dp_init_connector(struct intel_digital_port *dig_port,
>  		 */
>  		drm_WARN_ON(dev, intel_phy_is_tc(dev_priv, phy));
>  		type = DRM_MODE_CONNECTOR_eDP;
> -		intel_encoder->type = INTEL_OUTPUT_EDP;
> -
> -		/* eDP only on port B and/or C on vlv/chv */
> -		if (drm_WARN_ON(dev, (IS_VALLEYVIEW(dev_priv) ||
> -				      IS_CHERRYVIEW(dev_priv)) &&
> -				port != PORT_B && port != PORT_C))
> -			return false;
>  	} else {
>  		type = DRM_MODE_CONNECTOR_DisplayPort;
>  	}
>  
> -	intel_dp_set_source_rates(intel_dp);
> -
>  	if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv))
>  		intel_dp->active_pipe = vlv_active_pipe(intel_dp);
>  
> +	/*
> +	 * For eDP we always set the encoder type to INTEL_OUTPUT_EDP, but
> +	 * for DP the encoder type can be set by the caller to
> +	 * INTEL_OUTPUT_UNKNOWN for DDI, so don't rewrite it.
> +	 */
> +	if (type == DRM_MODE_CONNECTOR_eDP)
> +		intel_encoder->type = INTEL_OUTPUT_EDP;
> +
> +	/* eDP only on port B and/or C on vlv/chv */
> +	if (drm_WARN_ON(dev, (IS_VALLEYVIEW(dev_priv) ||
> +			      IS_CHERRYVIEW(dev_priv)) &&
> +			intel_dp_is_edp(intel_dp) &&
> +			port != PORT_B && port != PORT_C))
> +		return false;
> +
>  	drm_dbg_kms(&dev_priv->drm,
>  		    "Adding %s connector on [ENCODER:%d:%s]\n",
>  		    type == DRM_MODE_CONNECTOR_eDP ? "eDP" : "DP",
Manasi Navare July 3, 2020, 12:06 a.m. UTC | #2
On Thu, Jul 02, 2020 at 03:34:36PM -0700, Souza, Jose wrote:
> On Thu, 2020-07-02 at 15:18 -0700, Matt Atwood wrote:
> > The initial CI results did not include a TGL system which includes a
> > panel that is having issues with patch. Revert while we triage.
> > 
> > This reverts commit 680c45c767f63e35f063d3ea04f388a9f7ae7079.
> 
> Missing the Signed-off-by line also the commit references should follow this format "2850748ef876 ("drm/i915: Pull i915_vma_pin under the vm-
> >mutex")".
> Please CC me in the updated version.

Arent these references for the Fixes , I see that revert references have always been a full SHA like
Matt has in his patch?

Can you review his v2?

Regards
Manasi

> 
> > ---
> >  drivers/gpu/drm/i915/display/intel_dp.c | 28 +++++++++++++++----------
> >  1 file changed, 17 insertions(+), 11 deletions(-)
> > 
> > diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
> > index a5ab405d3a12..d6295eb20b63 100644
> > --- a/drivers/gpu/drm/i915/display/intel_dp.c
> > +++ b/drivers/gpu/drm/i915/display/intel_dp.c
> > @@ -137,8 +137,6 @@ static const u8 valid_dsc_slicecount[] = {1, 2, 4};
> >   *
> >   * If a CPU or PCH DP output is attached to an eDP panel, this function
> >   * will return true, and false otherwise.
> > - *
> > - * This function is not safe to use prior to encoder type being set.
> >   */
> >  bool intel_dp_is_edp(struct intel_dp *intel_dp)
> >  {
> > @@ -8159,6 +8157,8 @@ intel_dp_init_connector(struct intel_digital_port *dig_port,
> >  		     intel_encoder->base.name))
> >  		return false;
> >  
> > +	intel_dp_set_source_rates(intel_dp);
> > +
> >  	intel_dp->reset_link_params = true;
> >  	intel_dp->pps_pipe = INVALID_PIPE;
> >  	intel_dp->active_pipe = INVALID_PIPE;
> > @@ -8174,22 +8174,28 @@ intel_dp_init_connector(struct intel_digital_port *dig_port,
> >  		 */
> >  		drm_WARN_ON(dev, intel_phy_is_tc(dev_priv, phy));
> >  		type = DRM_MODE_CONNECTOR_eDP;
> > -		intel_encoder->type = INTEL_OUTPUT_EDP;
> > -
> > -		/* eDP only on port B and/or C on vlv/chv */
> > -		if (drm_WARN_ON(dev, (IS_VALLEYVIEW(dev_priv) ||
> > -				      IS_CHERRYVIEW(dev_priv)) &&
> > -				port != PORT_B && port != PORT_C))
> > -			return false;
> >  	} else {
> >  		type = DRM_MODE_CONNECTOR_DisplayPort;
> >  	}
> >  
> > -	intel_dp_set_source_rates(intel_dp);
> > -
> >  	if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv))
> >  		intel_dp->active_pipe = vlv_active_pipe(intel_dp);
> >  
> > +	/*
> > +	 * For eDP we always set the encoder type to INTEL_OUTPUT_EDP, but
> > +	 * for DP the encoder type can be set by the caller to
> > +	 * INTEL_OUTPUT_UNKNOWN for DDI, so don't rewrite it.
> > +	 */
> > +	if (type == DRM_MODE_CONNECTOR_eDP)
> > +		intel_encoder->type = INTEL_OUTPUT_EDP;
> > +
> > +	/* eDP only on port B and/or C on vlv/chv */
> > +	if (drm_WARN_ON(dev, (IS_VALLEYVIEW(dev_priv) ||
> > +			      IS_CHERRYVIEW(dev_priv)) &&
> > +			intel_dp_is_edp(intel_dp) &&
> > +			port != PORT_B && port != PORT_C))
> > +		return false;
> > +
> >  	drm_dbg_kms(&dev_priv->drm,
> >  		    "Adding %s connector on [ENCODER:%d:%s]\n",
> >  		    type == DRM_MODE_CONNECTOR_eDP ? "eDP" : "DP",

Patch
diff mbox series

diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
index a5ab405d3a12..d6295eb20b63 100644
--- a/drivers/gpu/drm/i915/display/intel_dp.c
+++ b/drivers/gpu/drm/i915/display/intel_dp.c
@@ -137,8 +137,6 @@  static const u8 valid_dsc_slicecount[] = {1, 2, 4};
  *
  * If a CPU or PCH DP output is attached to an eDP panel, this function
  * will return true, and false otherwise.
- *
- * This function is not safe to use prior to encoder type being set.
  */
 bool intel_dp_is_edp(struct intel_dp *intel_dp)
 {
@@ -8159,6 +8157,8 @@  intel_dp_init_connector(struct intel_digital_port *dig_port,
 		     intel_encoder->base.name))
 		return false;
 
+	intel_dp_set_source_rates(intel_dp);
+
 	intel_dp->reset_link_params = true;
 	intel_dp->pps_pipe = INVALID_PIPE;
 	intel_dp->active_pipe = INVALID_PIPE;
@@ -8174,22 +8174,28 @@  intel_dp_init_connector(struct intel_digital_port *dig_port,
 		 */
 		drm_WARN_ON(dev, intel_phy_is_tc(dev_priv, phy));
 		type = DRM_MODE_CONNECTOR_eDP;
-		intel_encoder->type = INTEL_OUTPUT_EDP;
-
-		/* eDP only on port B and/or C on vlv/chv */
-		if (drm_WARN_ON(dev, (IS_VALLEYVIEW(dev_priv) ||
-				      IS_CHERRYVIEW(dev_priv)) &&
-				port != PORT_B && port != PORT_C))
-			return false;
 	} else {
 		type = DRM_MODE_CONNECTOR_DisplayPort;
 	}
 
-	intel_dp_set_source_rates(intel_dp);
-
 	if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv))
 		intel_dp->active_pipe = vlv_active_pipe(intel_dp);
 
+	/*
+	 * For eDP we always set the encoder type to INTEL_OUTPUT_EDP, but
+	 * for DP the encoder type can be set by the caller to
+	 * INTEL_OUTPUT_UNKNOWN for DDI, so don't rewrite it.
+	 */
+	if (type == DRM_MODE_CONNECTOR_eDP)
+		intel_encoder->type = INTEL_OUTPUT_EDP;
+
+	/* eDP only on port B and/or C on vlv/chv */
+	if (drm_WARN_ON(dev, (IS_VALLEYVIEW(dev_priv) ||
+			      IS_CHERRYVIEW(dev_priv)) &&
+			intel_dp_is_edp(intel_dp) &&
+			port != PORT_B && port != PORT_C))
+		return false;
+
 	drm_dbg_kms(&dev_priv->drm,
 		    "Adding %s connector on [ENCODER:%d:%s]\n",
 		    type == DRM_MODE_CONNECTOR_eDP ? "eDP" : "DP",