diff mbox series

[v5,13/13] arm64: dts: freescale: sl28: enable fan support

Message ID 20200706175353.16404-14-michael@walle.cc (mailing list archive)
State New, archived
Headers show
Series Add support for Kontron sl28cpld | expand

Commit Message

Michael Walle July 6, 2020, 5:53 p.m. UTC
Add a pwm-fan mapped to the PWM channel 0 which is connected to the
fan connector of the carrier.

Signed-off-by: Michael Walle <michael@walle.cc>
---
Changes since v4:
 - none

Changes since v3:
 - see cover letter

 .../dts/freescale/fsl-ls1028a-kontron-sl28-var3-ads2.dts | 9 +++++++++
 1 file changed, 9 insertions(+)

Comments

Linus Walleij July 8, 2020, 7:39 a.m. UTC | #1
Hi Michael,

just a drive-by-comment:

On Mon, Jul 6, 2020 at 7:57 PM Michael Walle <michael@walle.cc> wrote:

> Add a pwm-fan mapped to the PWM channel 0 which is connected to the
> fan connector of the carrier.
>
> Signed-off-by: Michael Walle <michael@walle.cc>

If you have a cooling device like this, do you also have a temperature
sensor? In that case it makes sense to add a thermal zone and a
policy, such as I did for a device in
6e97f0aaca4ca778905dd1dc667cbf379f4cae15

Yours,
Linus Walleij
Michael Walle July 8, 2020, 7:56 a.m. UTC | #2
Hi Linus,

Am 2020-07-08 09:39, schrieb Linus Walleij:
> just a drive-by-comment:
> 
> On Mon, Jul 6, 2020 at 7:57 PM Michael Walle <michael@walle.cc> wrote:
> 
>> Add a pwm-fan mapped to the PWM channel 0 which is connected to the
>> fan connector of the carrier.
>> 
>> Signed-off-by: Michael Walle <michael@walle.cc>
> 
> If you have a cooling device like this, do you also have a temperature
> sensor? In that case it makes sense to add a thermal zone and a
> policy, such as I did for a device in
> 6e97f0aaca4ca778905dd1dc667cbf379f4cae15

Yep, the CPU and DDR controller have temperatur sensors and there are
already thermal zones for them. We have the fan linked to the policies
in our vendor DTS overlay. For now I didn't want to include that here,
mainly because there are no labels in the fsl-ls1028a.dtsi for the
thermal zone/cooling maps/trips. But this is still on my TODO, when
this series finally make it into the kernel ;)

-michael
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var3-ads2.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var3-ads2.dts
index 0973a6a45217..c45d7b40e374 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var3-ads2.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var3-ads2.dts
@@ -15,6 +15,15 @@ 
 	compatible = "kontron,sl28-var3-ads2", "kontron,sl28-var3",
 		     "kontron,sl28", "fsl,ls1028a";
 
+	pwm-fan {
+		compatible = "pwm-fan";
+		cooling-min-state = <0>;
+		cooling-max-state = <3>;
+		#cooling-cells = <2>;
+		pwms = <&sl28cpld_pwm0 0 4000000>;
+		cooling-levels = <1 128 192 255>;
+	};
+
 	sound {
 		#address-cells = <1>;
 		#size-cells = <0>;