diff mbox series

[V6,6/6] clk: imx6sl: Fix build warning reported by kernel test robot

Message ID 1594098579-25050-7-git-send-email-Anson.Huang@nxp.com (mailing list archive)
State New, archived
Headers show
Series Support building i.MX ARMv8 platforms clock driver as module | expand

Commit Message

Anson Huang July 7, 2020, 5:09 a.m. UTC
Use readl_relaxed() instead of __raw_readl(), and use BIT(x)
instead of (1 << X) to fix below build warning reported by kernel
test robot:

drivers/clk/imx/clk-imx6sl.c:149:49: warning: Shifting signed 32-bit
value by 31 bits is undefined behaviour [shiftTooManyBitsSigned]
     while (!(__raw_readl(anatop_base + PLL_ARM) & BM_PLL_ARM_LOCK))

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reported-by: kernel test robot <lkp@intel.com>
---
New patch.
---
 drivers/clk/imx/clk-imx6sl.c | 15 ++++++++-------
 1 file changed, 8 insertions(+), 7 deletions(-)

Comments

Stephen Boyd July 16, 2020, 1 a.m. UTC | #1
Quoting Anson Huang (2020-07-06 22:09:39)
> Use readl_relaxed() instead of __raw_readl(), and use BIT(x)
> instead of (1 << X) to fix below build warning reported by kernel
> test robot:
> 
> drivers/clk/imx/clk-imx6sl.c:149:49: warning: Shifting signed 32-bit
> value by 31 bits is undefined behaviour [shiftTooManyBitsSigned]
>      while (!(__raw_readl(anatop_base + PLL_ARM) & BM_PLL_ARM_LOCK))
> 
> Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
> Reported-by: kernel test robot <lkp@intel.com>
> ---

The subject is poor. Please improve it so that it summarizes the change
instead of the reaction to a warning from a robot.

> New patch.
> ---
>  drivers/clk/imx/clk-imx6sl.c | 15 ++++++++-------
>  1 file changed, 8 insertions(+), 7 deletions(-)
> 

This should come earlier in the series too so that the build warning
doesn't come out before this patch is applied.
Shawn Guo July 20, 2020, 1:55 a.m. UTC | #2
On Wed, Jul 15, 2020 at 06:00:17PM -0700, Stephen Boyd wrote:
> Quoting Anson Huang (2020-07-06 22:09:39)
> > Use readl_relaxed() instead of __raw_readl(), and use BIT(x)
> > instead of (1 << X) to fix below build warning reported by kernel
> > test robot:
> > 
> > drivers/clk/imx/clk-imx6sl.c:149:49: warning: Shifting signed 32-bit
> > value by 31 bits is undefined behaviour [shiftTooManyBitsSigned]
> >      while (!(__raw_readl(anatop_base + PLL_ARM) & BM_PLL_ARM_LOCK))
> > 
> > Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
> > Reported-by: kernel test robot <lkp@intel.com>
> > ---
> 
> The subject is poor. Please improve it so that it summarizes the change
> instead of the reaction to a warning from a robot.
> 
> > New patch.
> > ---
> >  drivers/clk/imx/clk-imx6sl.c | 15 ++++++++-------
> >  1 file changed, 8 insertions(+), 7 deletions(-)
> > 
> 
> This should come earlier in the series too so that the build warning
> doesn't come out before this patch is applied.

Anson,

Please update the series per request from Stephen.  I have dropped the
series from my branch.

Shawn
diff mbox series

Patch

diff --git a/drivers/clk/imx/clk-imx6sl.c b/drivers/clk/imx/clk-imx6sl.c
index 0f647d1..e69dba1 100644
--- a/drivers/clk/imx/clk-imx6sl.c
+++ b/drivers/clk/imx/clk-imx6sl.c
@@ -3,6 +3,7 @@ 
  * Copyright 2013-2014 Freescale Semiconductor, Inc.
  */
 
+#include <linux/bitfield.h>
 #include <linux/clk.h>
 #include <linux/clkdev.h>
 #include <linux/err.h>
@@ -14,19 +15,19 @@ 
 #include "clk.h"
 
 #define CCSR			0xc
-#define BM_CCSR_PLL1_SW_CLK_SEL	(1 << 2)
+#define BM_CCSR_PLL1_SW_CLK_SEL	BIT(2)
 #define CACRR			0x10
 #define CDHIPR			0x48
-#define BM_CDHIPR_ARM_PODF_BUSY	(1 << 16)
+#define BM_CDHIPR_ARM_PODF_BUSY	BIT(16)
 #define ARM_WAIT_DIV_396M	2
 #define ARM_WAIT_DIV_792M	4
 #define ARM_WAIT_DIV_996M	6
 
 #define PLL_ARM			0x0
-#define BM_PLL_ARM_DIV_SELECT	(0x7f << 0)
-#define BM_PLL_ARM_POWERDOWN	(1 << 12)
-#define BM_PLL_ARM_ENABLE	(1 << 13)
-#define BM_PLL_ARM_LOCK		(1 << 31)
+#define BM_PLL_ARM_DIV_SELECT	0x7f
+#define BM_PLL_ARM_POWERDOWN	BIT(12)
+#define BM_PLL_ARM_ENABLE	BIT(13)
+#define BM_PLL_ARM_LOCK		BIT(31)
 #define PLL_ARM_DIV_792M	66
 
 static const char *step_sels[]		= { "osc", "pll2_pfd2", };
@@ -145,7 +146,7 @@  static void imx6sl_enable_pll_arm(bool enable)
 		val |= BM_PLL_ARM_ENABLE;
 		val &= ~BM_PLL_ARM_POWERDOWN;
 		writel_relaxed(val, anatop_base + PLL_ARM);
-		while (!(__raw_readl(anatop_base + PLL_ARM) & BM_PLL_ARM_LOCK))
+		while (!(readl_relaxed(anatop_base + PLL_ARM) & BM_PLL_ARM_LOCK))
 			;
 	} else {
 		 writel_relaxed(saved_pll_arm, anatop_base + PLL_ARM);