diff mbox series

[v5,4/9] remoteproc: Introducing function rproc_actuate()

Message ID 20200707210014.927691-5-mathieu.poirier@linaro.org (mailing list archive)
State Superseded
Headers show
Series remoteproc: Add support for attaching with rproc | expand

Commit Message

Mathieu Poirier July 7, 2020, 9 p.m. UTC
Introduce function rproc_actuate() that provides the same
functionatlity as rproc_fw_boot(), but without the steps that
involve interaction with the firmware image.  That way we can
deal with scenarios where the remoteproc core is attaching
to a remote processor that has already been started by another
entity.

Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
---
 drivers/remoteproc/remoteproc_core.c | 59 +++++++++++++++++++++++++++-
 1 file changed, 58 insertions(+), 1 deletion(-)

Comments

Arnaud POULIQUEN July 9, 2020, 8:29 a.m. UTC | #1
Hi Mathieu,


On 7/7/20 11:00 PM, Mathieu Poirier wrote:
> Introduce function rproc_actuate() that provides the same
> functionatlity as rproc_fw_boot(), but without the steps that
> involve interaction with the firmware image.  That way we can
> deal with scenarios where the remoteproc core is attaching
> to a remote processor that has already been started by another
> entity.
> 
> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>

Reviewed-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>

Thanks,
Arnaud
> ---
>  drivers/remoteproc/remoteproc_core.c | 59 +++++++++++++++++++++++++++-
>  1 file changed, 58 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c
> index 1e8e66a25bd6..fd424662801f 100644
> --- a/drivers/remoteproc/remoteproc_core.c
> +++ b/drivers/remoteproc/remoteproc_core.c
> @@ -1369,7 +1369,7 @@ static int rproc_start(struct rproc *rproc, const struct firmware *fw)
>  	return ret;
>  }
>  
> -static int __maybe_unused rproc_attach(struct rproc *rproc)
> +static int rproc_attach(struct rproc *rproc)
>  {
>  	struct device *dev = &rproc->dev;
>  	int ret;
> @@ -1490,6 +1490,63 @@ static int rproc_fw_boot(struct rproc *rproc, const struct firmware *fw)
>  	return ret;
>  }
>  
> +/*
> + * Attach to remote processor - similar to rproc_fw_boot() but without
> + * the steps that deal with the firmware image.
> + */
> +static int __maybe_unused rproc_actuate(struct rproc *rproc)
> +{
> +	struct device *dev = &rproc->dev;
> +	int ret;
> +
> +	/*
> +	 * if enabling an IOMMU isn't relevant for this rproc, this is
> +	 * just a nop
> +	 */
> +	ret = rproc_enable_iommu(rproc);
> +	if (ret) {
> +		dev_err(dev, "can't enable iommu: %d\n", ret);
> +		return ret;
> +	}
> +
> +	/* reset max_notifyid */
> +	rproc->max_notifyid = -1;
> +
> +	/* reset handled vdev */
> +	rproc->nb_vdev = 0;
> +
> +	/*
> +	 * Handle firmware resources required to attach to a remote processor.
> +	 * Because we are attaching rather than booting the remote processor,
> +	 * we expect the platform driver to properly set rproc->table_ptr.
> +	 */
> +	ret = rproc_handle_resources(rproc, rproc_loading_handlers);
> +	if (ret) {
> +		dev_err(dev, "Failed to process resources: %d\n", ret);
> +		goto disable_iommu;
> +	}
> +
> +	/* Allocate carveout resources associated to rproc */
> +	ret = rproc_alloc_registered_carveouts(rproc);
> +	if (ret) {
> +		dev_err(dev, "Failed to allocate associated carveouts: %d\n",
> +			ret);
> +		goto clean_up_resources;
> +	}
> +
> +	ret = rproc_attach(rproc);
> +	if (ret)
> +		goto clean_up_resources;
> +
> +	return 0;
> +
> +clean_up_resources:
> +	rproc_resource_cleanup(rproc);
> +disable_iommu:
> +	rproc_disable_iommu(rproc);
> +	return ret;
> +}
> +
>  /*
>   * take a firmware and boot it up.
>   *
>
diff mbox series

Patch

diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c
index 1e8e66a25bd6..fd424662801f 100644
--- a/drivers/remoteproc/remoteproc_core.c
+++ b/drivers/remoteproc/remoteproc_core.c
@@ -1369,7 +1369,7 @@  static int rproc_start(struct rproc *rproc, const struct firmware *fw)
 	return ret;
 }
 
-static int __maybe_unused rproc_attach(struct rproc *rproc)
+static int rproc_attach(struct rproc *rproc)
 {
 	struct device *dev = &rproc->dev;
 	int ret;
@@ -1490,6 +1490,63 @@  static int rproc_fw_boot(struct rproc *rproc, const struct firmware *fw)
 	return ret;
 }
 
+/*
+ * Attach to remote processor - similar to rproc_fw_boot() but without
+ * the steps that deal with the firmware image.
+ */
+static int __maybe_unused rproc_actuate(struct rproc *rproc)
+{
+	struct device *dev = &rproc->dev;
+	int ret;
+
+	/*
+	 * if enabling an IOMMU isn't relevant for this rproc, this is
+	 * just a nop
+	 */
+	ret = rproc_enable_iommu(rproc);
+	if (ret) {
+		dev_err(dev, "can't enable iommu: %d\n", ret);
+		return ret;
+	}
+
+	/* reset max_notifyid */
+	rproc->max_notifyid = -1;
+
+	/* reset handled vdev */
+	rproc->nb_vdev = 0;
+
+	/*
+	 * Handle firmware resources required to attach to a remote processor.
+	 * Because we are attaching rather than booting the remote processor,
+	 * we expect the platform driver to properly set rproc->table_ptr.
+	 */
+	ret = rproc_handle_resources(rproc, rproc_loading_handlers);
+	if (ret) {
+		dev_err(dev, "Failed to process resources: %d\n", ret);
+		goto disable_iommu;
+	}
+
+	/* Allocate carveout resources associated to rproc */
+	ret = rproc_alloc_registered_carveouts(rproc);
+	if (ret) {
+		dev_err(dev, "Failed to allocate associated carveouts: %d\n",
+			ret);
+		goto clean_up_resources;
+	}
+
+	ret = rproc_attach(rproc);
+	if (ret)
+		goto clean_up_resources;
+
+	return 0;
+
+clean_up_resources:
+	rproc_resource_cleanup(rproc);
+disable_iommu:
+	rproc_disable_iommu(rproc);
+	return ret;
+}
+
 /*
  * take a firmware and boot it up.
  *