[v3,6/9] soc: mediatek: cmdq: add write_s_mask value function
diff mbox series

Message ID 1594136714-11650-7-git-send-email-dennis-yc.hsieh@mediatek.com
State New
Headers show
Series
  • support cmdq helper function on mt6779 platform
Related show

Commit Message

Dennis YC Hsieh July 7, 2020, 3:45 p.m. UTC
add write_s_mask_value function in cmdq helper functions which
writes a constant value to address with mask and large dma
access support.

Signed-off-by: Dennis YC Hsieh <dennis-yc.hsieh@mediatek.com>
---
 drivers/soc/mediatek/mtk-cmdq-helper.c |   21 +++++++++++++++++++++
 include/linux/soc/mediatek/mtk-cmdq.h  |   15 +++++++++++++++
 2 files changed, 36 insertions(+)

Patch
diff mbox series

diff --git a/drivers/soc/mediatek/mtk-cmdq-helper.c b/drivers/soc/mediatek/mtk-cmdq-helper.c
index 4e86b65815fc..b6e25f216605 100644
--- a/drivers/soc/mediatek/mtk-cmdq-helper.c
+++ b/drivers/soc/mediatek/mtk-cmdq-helper.c
@@ -294,6 +294,27 @@  int cmdq_pkt_write_s_value(struct cmdq_pkt *pkt, u8 high_addr_reg_idx,
 }
 EXPORT_SYMBOL(cmdq_pkt_write_s_value);
 
+int cmdq_pkt_write_s_mask_value(struct cmdq_pkt *pkt, u8 high_addr_reg_idx,
+				u16 addr_low, u32 value, u32 mask)
+{
+	struct cmdq_instruction inst = {};
+	int err;
+
+	inst.op = CMDQ_CODE_MASK;
+	inst.mask = ~mask;
+	err = cmdq_pkt_append_command(pkt, inst);
+	if (err < 0)
+		return err;
+
+	inst.op = CMDQ_CODE_WRITE_S_MASK;
+	inst.sop = high_addr_reg_idx;
+	inst.offset = addr_low;
+	inst.value = value;
+
+	return cmdq_pkt_append_command(pkt, inst);
+}
+EXPORT_SYMBOL(cmdq_pkt_write_s_mask_value);
+
 int cmdq_pkt_wfe(struct cmdq_pkt *pkt, u16 event)
 {
 	struct cmdq_instruction inst = { {0} };
diff --git a/include/linux/soc/mediatek/mtk-cmdq.h b/include/linux/soc/mediatek/mtk-cmdq.h
index ae73e10da274..d9390d76ee14 100644
--- a/include/linux/soc/mediatek/mtk-cmdq.h
+++ b/include/linux/soc/mediatek/mtk-cmdq.h
@@ -165,6 +165,21 @@  int cmdq_pkt_write_s_value(struct cmdq_pkt *pkt, u8 high_addr_reg_idx,
 			   u16 addr_low, u32 value);
 
 /**
+ * cmdq_pkt_write_s_mask_value() - append write_s command with mask to the CMDQ
+ *				   packet which write value to a physical
+ *				   address
+ * @pkt:	the CMDQ packet
+ * @high_addr_reg_idx:	internal register ID which contains high address of pa
+ * @addr_low:	low address of pa
+ * @value:	the specified target value
+ * @mask:	the specified target mask
+ *
+ * Return: 0 for success; else the error code is returned
+ */
+int cmdq_pkt_write_s_mask_value(struct cmdq_pkt *pkt, u8 high_addr_reg_idx,
+				u16 addr_low, u32 value, u32 mask);
+
+/**
  * cmdq_pkt_wfe() - append wait for event command to the CMDQ packet
  * @pkt:	the CMDQ packet
  * @event:	the desired event type to "wait and CLEAR"