[v4,53/78] drm/vc4: hdmi: Add PHY init and disable function
diff mbox series

Message ID 9ac309938e18a55c1c48d3520fe51a61f3c09b1f.1594230107.git-series.maxime@cerno.tech
State New
Headers show
Series
  • drm/vc4: Support BCM2711 Display Pipeline
Related show

Commit Message

Maxime Ripard July 8, 2020, 5:42 p.m. UTC
The HDMI PHY in the BCM2711 HDMI controller is significantly more
complicated to setup than in the older BCM283x SoCs.

Let's add hooks to enable and disable the PHY.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 drivers/gpu/drm/vc4/Makefile       |  1 +
 drivers/gpu/drm/vc4/vc4_hdmi.c     | 14 +++++++-------
 drivers/gpu/drm/vc4/vc4_hdmi.h     | 13 +++++++++++++
 drivers/gpu/drm/vc4/vc4_hdmi_phy.c | 25 +++++++++++++++++++++++++
 4 files changed, 46 insertions(+), 7 deletions(-)
 create mode 100644 drivers/gpu/drm/vc4/vc4_hdmi_phy.c

Comments

Dave Stevenson July 28, 2020, 1:03 p.m. UTC | #1
Hi Maxime

On Wed, 8 Jul 2020 at 18:43, Maxime Ripard <maxime@cerno.tech> wrote:
>
> The HDMI PHY in the BCM2711 HDMI controller is significantly more
> complicated to setup than in the older BCM283x SoCs.
>
> Let's add hooks to enable and disable the PHY.
>
> Signed-off-by: Maxime Ripard <maxime@cerno.tech>

Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>

> ---
>  drivers/gpu/drm/vc4/Makefile       |  1 +
>  drivers/gpu/drm/vc4/vc4_hdmi.c     | 14 +++++++-------
>  drivers/gpu/drm/vc4/vc4_hdmi.h     | 13 +++++++++++++
>  drivers/gpu/drm/vc4/vc4_hdmi_phy.c | 25 +++++++++++++++++++++++++
>  4 files changed, 46 insertions(+), 7 deletions(-)
>  create mode 100644 drivers/gpu/drm/vc4/vc4_hdmi_phy.c
>
> diff --git a/drivers/gpu/drm/vc4/Makefile b/drivers/gpu/drm/vc4/Makefile
> index b303703bc7f3..d0163e18e9ca 100644
> --- a/drivers/gpu/drm/vc4/Makefile
> +++ b/drivers/gpu/drm/vc4/Makefile
> @@ -12,6 +12,7 @@ vc4-y := \
>         vc4_kms.o \
>         vc4_gem.o \
>         vc4_hdmi.o \
> +       vc4_hdmi_phy.o \
>         vc4_vec.o \
>         vc4_hvs.o \
>         vc4_irq.o \
> diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
> index 80bc3dd9d4a8..068041145d1c 100644
> --- a/drivers/gpu/drm/vc4/vc4_hdmi.c
> +++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
> @@ -321,7 +321,9 @@ static void vc4_hdmi_encoder_disable(struct drm_encoder *encoder)
>
>         HDMI_WRITE(HDMI_RAM_PACKET_CONFIG, 0);
>
> -       HDMI_WRITE(HDMI_TX_PHY_RESET_CTL, 0xf << 16);
> +       if (vc4_hdmi->variant->phy_disable)
> +               vc4_hdmi->variant->phy_disable(vc4_hdmi);
> +
>         HDMI_WRITE(HDMI_VID_CTL,
>                    HDMI_READ(HDMI_VID_CTL) & ~VC4_HD_VID_CTL_ENABLE);
>
> @@ -381,12 +383,8 @@ static void vc4_hdmi_encoder_enable(struct drm_encoder *encoder)
>         if (vc4_hdmi->variant->reset)
>                 vc4_hdmi->variant->reset(vc4_hdmi);
>
> -       /* PHY should be in reset, like
> -        * vc4_hdmi_encoder_disable() does.
> -        */
> -       HDMI_WRITE(HDMI_TX_PHY_RESET_CTL, 0xf << 16);
> -
> -       HDMI_WRITE(HDMI_TX_PHY_RESET_CTL, 0);
> +       if (vc4_hdmi->variant->phy_init)
> +               vc4_hdmi->variant->phy_init(vc4_hdmi, mode);
>
>         if (debug_dump_regs) {
>                 struct drm_printer p = drm_info_printer(&vc4_hdmi->pdev->dev);
> @@ -1433,6 +1431,8 @@ static const struct vc4_hdmi_variant bcm2835_variant = {
>
>         .init_resources         = vc4_hdmi_init_resources,
>         .reset                  = vc4_hdmi_reset,
> +       .phy_init               = vc4_hdmi_phy_init,
> +       .phy_disable            = vc4_hdmi_phy_disable,
>  };
>
>  static const struct of_device_id vc4_hdmi_dt_match[] = {
> diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.h b/drivers/gpu/drm/vc4/vc4_hdmi.h
> index 17a30589f39c..32c80161c786 100644
> --- a/drivers/gpu/drm/vc4/vc4_hdmi.h
> +++ b/drivers/gpu/drm/vc4/vc4_hdmi.h
> @@ -21,6 +21,8 @@ to_vc4_hdmi_encoder(struct drm_encoder *encoder)
>         return container_of(encoder, struct vc4_hdmi_encoder, base.base);
>  }
>
> +struct drm_display_mode;
> +
>  struct vc4_hdmi;
>  struct vc4_hdmi_register;
>
> @@ -38,6 +40,13 @@ struct vc4_hdmi_variant {
>
>         /* Callback to reset the HDMI block */
>         void (*reset)(struct vc4_hdmi *vc4_hdmi);
> +
> +       /* Callback to initialize the PHY according to the mode */
> +       void (*phy_init)(struct vc4_hdmi *vc4_hdmi,
> +                        struct drm_display_mode *mode);
> +
> +       /* Callback to disable the PHY */
> +       void (*phy_disable)(struct vc4_hdmi *vc4_hdmi);
>  };
>
>  /* HDMI audio information */
> @@ -95,4 +104,8 @@ encoder_to_vc4_hdmi(struct drm_encoder *encoder)
>         return container_of(_encoder, struct vc4_hdmi, encoder);
>  }
>
> +void vc4_hdmi_phy_init(struct vc4_hdmi *vc4_hdmi,
> +                      struct drm_display_mode *mode);
> +void vc4_hdmi_phy_disable(struct vc4_hdmi *vc4_hdmi);
> +
>  #endif /* _VC4_HDMI_H_ */
> diff --git a/drivers/gpu/drm/vc4/vc4_hdmi_phy.c b/drivers/gpu/drm/vc4/vc4_hdmi_phy.c
> new file mode 100644
> index 000000000000..5a1746877bb5
> --- /dev/null
> +++ b/drivers/gpu/drm/vc4/vc4_hdmi_phy.c
> @@ -0,0 +1,25 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (C) 2015 Broadcom
> + * Copyright (c) 2014 The Linux Foundation. All rights reserved.
> + * Copyright (C) 2013 Red Hat
> + * Author: Rob Clark <robdclark@gmail.com>
> + */
> +
> +#include "vc4_hdmi.h"
> +#include "vc4_hdmi_regs.h"
> +
> +void vc4_hdmi_phy_init(struct vc4_hdmi *vc4_hdmi, struct drm_display_mode *mode)
> +{
> +       /* PHY should be in reset, like
> +        * vc4_hdmi_encoder_disable() does.
> +        */
> +
> +       HDMI_WRITE(HDMI_TX_PHY_RESET_CTL, 0xf << 16);
> +       HDMI_WRITE(HDMI_TX_PHY_RESET_CTL, 0);
> +}
> +
> +void vc4_hdmi_phy_disable(struct vc4_hdmi *vc4_hdmi)
> +{
> +       HDMI_WRITE(HDMI_TX_PHY_RESET_CTL, 0xf << 16);
> +}
> --
> git-series 0.9.1

Patch
diff mbox series

diff --git a/drivers/gpu/drm/vc4/Makefile b/drivers/gpu/drm/vc4/Makefile
index b303703bc7f3..d0163e18e9ca 100644
--- a/drivers/gpu/drm/vc4/Makefile
+++ b/drivers/gpu/drm/vc4/Makefile
@@ -12,6 +12,7 @@  vc4-y := \
 	vc4_kms.o \
 	vc4_gem.o \
 	vc4_hdmi.o \
+	vc4_hdmi_phy.o \
 	vc4_vec.o \
 	vc4_hvs.o \
 	vc4_irq.o \
diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
index 80bc3dd9d4a8..068041145d1c 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
@@ -321,7 +321,9 @@  static void vc4_hdmi_encoder_disable(struct drm_encoder *encoder)
 
 	HDMI_WRITE(HDMI_RAM_PACKET_CONFIG, 0);
 
-	HDMI_WRITE(HDMI_TX_PHY_RESET_CTL, 0xf << 16);
+	if (vc4_hdmi->variant->phy_disable)
+		vc4_hdmi->variant->phy_disable(vc4_hdmi);
+
 	HDMI_WRITE(HDMI_VID_CTL,
 		   HDMI_READ(HDMI_VID_CTL) & ~VC4_HD_VID_CTL_ENABLE);
 
@@ -381,12 +383,8 @@  static void vc4_hdmi_encoder_enable(struct drm_encoder *encoder)
 	if (vc4_hdmi->variant->reset)
 		vc4_hdmi->variant->reset(vc4_hdmi);
 
-	/* PHY should be in reset, like
-	 * vc4_hdmi_encoder_disable() does.
-	 */
-	HDMI_WRITE(HDMI_TX_PHY_RESET_CTL, 0xf << 16);
-
-	HDMI_WRITE(HDMI_TX_PHY_RESET_CTL, 0);
+	if (vc4_hdmi->variant->phy_init)
+		vc4_hdmi->variant->phy_init(vc4_hdmi, mode);
 
 	if (debug_dump_regs) {
 		struct drm_printer p = drm_info_printer(&vc4_hdmi->pdev->dev);
@@ -1433,6 +1431,8 @@  static const struct vc4_hdmi_variant bcm2835_variant = {
 
 	.init_resources		= vc4_hdmi_init_resources,
 	.reset			= vc4_hdmi_reset,
+	.phy_init		= vc4_hdmi_phy_init,
+	.phy_disable		= vc4_hdmi_phy_disable,
 };
 
 static const struct of_device_id vc4_hdmi_dt_match[] = {
diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.h b/drivers/gpu/drm/vc4/vc4_hdmi.h
index 17a30589f39c..32c80161c786 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.h
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.h
@@ -21,6 +21,8 @@  to_vc4_hdmi_encoder(struct drm_encoder *encoder)
 	return container_of(encoder, struct vc4_hdmi_encoder, base.base);
 }
 
+struct drm_display_mode;
+
 struct vc4_hdmi;
 struct vc4_hdmi_register;
 
@@ -38,6 +40,13 @@  struct vc4_hdmi_variant {
 
 	/* Callback to reset the HDMI block */
 	void (*reset)(struct vc4_hdmi *vc4_hdmi);
+
+	/* Callback to initialize the PHY according to the mode */
+	void (*phy_init)(struct vc4_hdmi *vc4_hdmi,
+			 struct drm_display_mode *mode);
+
+	/* Callback to disable the PHY */
+	void (*phy_disable)(struct vc4_hdmi *vc4_hdmi);
 };
 
 /* HDMI audio information */
@@ -95,4 +104,8 @@  encoder_to_vc4_hdmi(struct drm_encoder *encoder)
 	return container_of(_encoder, struct vc4_hdmi, encoder);
 }
 
+void vc4_hdmi_phy_init(struct vc4_hdmi *vc4_hdmi,
+		       struct drm_display_mode *mode);
+void vc4_hdmi_phy_disable(struct vc4_hdmi *vc4_hdmi);
+
 #endif /* _VC4_HDMI_H_ */
diff --git a/drivers/gpu/drm/vc4/vc4_hdmi_phy.c b/drivers/gpu/drm/vc4/vc4_hdmi_phy.c
new file mode 100644
index 000000000000..5a1746877bb5
--- /dev/null
+++ b/drivers/gpu/drm/vc4/vc4_hdmi_phy.c
@@ -0,0 +1,25 @@ 
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2015 Broadcom
+ * Copyright (c) 2014 The Linux Foundation. All rights reserved.
+ * Copyright (C) 2013 Red Hat
+ * Author: Rob Clark <robdclark@gmail.com>
+ */
+
+#include "vc4_hdmi.h"
+#include "vc4_hdmi_regs.h"
+
+void vc4_hdmi_phy_init(struct vc4_hdmi *vc4_hdmi, struct drm_display_mode *mode)
+{
+	/* PHY should be in reset, like
+	 * vc4_hdmi_encoder_disable() does.
+	 */
+
+	HDMI_WRITE(HDMI_TX_PHY_RESET_CTL, 0xf << 16);
+	HDMI_WRITE(HDMI_TX_PHY_RESET_CTL, 0);
+}
+
+void vc4_hdmi_phy_disable(struct vc4_hdmi *vc4_hdmi)
+{
+	HDMI_WRITE(HDMI_TX_PHY_RESET_CTL, 0xf << 16);
+}