diff mbox series

ARM: brcmstb: Add debug UART entry for 72614

Message ID 20200709232447.5902-1-f.fainelli@gmail.com (mailing list archive)
State New, archived
Headers show
Series ARM: brcmstb: Add debug UART entry for 72614 | expand

Commit Message

Florian Fainelli July 9, 2020, 11:24 p.m. UTC 
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
 arch/arm/include/debug/brcmstb.S | 24 +++++++++++++-----------
 1 file changed, 13 insertions(+), 11 deletions(-)

Comments

Florian Fainelli July 20, 2020, 11:21 p.m. UTC | #1 
On 7/9/20 4:24 PM, Florian Fainelli wrote:
> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

Applied to soc/next, thanks!
diff mbox series

Patch

diff --git a/arch/arm/include/debug/brcmstb.S b/arch/arm/include/debug/brcmstb.S
index 132a20c4a676..79223209d3f4 100644
--- a/arch/arm/include/debug/brcmstb.S
+++ b/arch/arm/include/debug/brcmstb.S
@@ -32,6 +32,7 @@ 
 #define UARTA_7271		UARTA_7268
 #define UARTA_7278		REG_PHYS_ADDR_V7(0x40c000)
 #define UARTA_7216		UARTA_7278
+#define UARTA_72164		UARTA_7278
 #define UARTA_7364		REG_PHYS_ADDR(0x40b000)
 #define UARTA_7366		UARTA_7364
 #define UARTA_74371		REG_PHYS_ADDR(0x406b00)
@@ -84,17 +85,18 @@  ARM_BE8(	rev	\rv, \rv )
 		/* Chip specific detection starts here */
 20:		checkuart(\rp, \rv, 0x33900000, 3390)
 21:		checkuart(\rp, \rv, 0x72160000, 7216)
-22:		checkuart(\rp, \rv, 0x72500000, 7250)
-23:		checkuart(\rp, \rv, 0x72550000, 7255)
-24:		checkuart(\rp, \rv, 0x72600000, 7260)
-25:		checkuart(\rp, \rv, 0x72680000, 7268)
-26:		checkuart(\rp, \rv, 0x72710000, 7271)
-27:		checkuart(\rp, \rv, 0x72780000, 7278)
-28:		checkuart(\rp, \rv, 0x73640000, 7364)
-29:		checkuart(\rp, \rv, 0x73660000, 7366)
-30:		checkuart(\rp, \rv, 0x07437100, 74371)
-31:		checkuart(\rp, \rv, 0x74390000, 7439)
-32:		checkuart(\rp, \rv, 0x74450000, 7445)
+22:		checkuart(\rp, \rv, 0x07216400, 72164)
+23:		checkuart(\rp, \rv, 0x72500000, 7250)
+24:		checkuart(\rp, \rv, 0x72550000, 7255)
+25:		checkuart(\rp, \rv, 0x72600000, 7260)
+26:		checkuart(\rp, \rv, 0x72680000, 7268)
+27:		checkuart(\rp, \rv, 0x72710000, 7271)
+28:		checkuart(\rp, \rv, 0x72780000, 7278)
+29:		checkuart(\rp, \rv, 0x73640000, 7364)
+30:		checkuart(\rp, \rv, 0x73660000, 7366)
+31:		checkuart(\rp, \rv, 0x07437100, 74371)
+32:		checkuart(\rp, \rv, 0x74390000, 7439)
+33:		checkuart(\rp, \rv, 0x74450000, 7445)
 
 		/* No valid UART found */
 90:		mov	\rp, #0