[6/14,v3] PCI: pciehp: Make "Power On" the default
diff mbox series

Message ID 20200710212026.27136-7-refactormyself@gmail.com
State Not Applicable
Delegated to: Bjorn Helgaas
Headers show
Series
  • PCI: Remove '*val = 0' from pcie_capability_read_*()
Related show

Commit Message

Saheed Bolarinwa July 10, 2020, 9:20 p.m. UTC
From: Bolarinwa Olayemi Saheed <refactormyself@gmail.com>

The default case of the switch statement is redundant since 
PCI_EXP_SLTCTL_PCC is only a single bit. pcie_capability_read_word()
currently causes "On" value to be set if it fails.

Make the switch-statement set status to "Power On" by default or when
(slot_ctrl & PCI_EXP_SLTCTL_PCC) == PCI_EXP_SLTCTL_PWR_ON. 

Suggested-by: Bjorn Helgaas <bjorn@helgaas.com>
Signed-off-by: Bolarinwa Olayemi Saheed <refactormyself@gmail.com>
---
 drivers/pci/hotplug/pciehp_hpc.c | 16 +++++-----------
 1 file changed, 5 insertions(+), 11 deletions(-)

Patch
diff mbox series

diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c
index 0b691e37fd04..78f806a9c6f1 100644
--- a/drivers/pci/hotplug/pciehp_hpc.c
+++ b/drivers/pci/hotplug/pciehp_hpc.c
@@ -399,22 +399,16 @@  void pciehp_get_power_status(struct controller *ctrl, u8 *status)
 {
 	struct pci_dev *pdev = ctrl_dev(ctrl);
 	u16 slot_ctrl;
+	int ret;
 
-	pcie_capability_read_word(pdev, PCI_EXP_SLTCTL, &slot_ctrl);
+	*status = 1;	/* On */
+	ret = pcie_capability_read_word(pdev, PCI_EXP_SLTCTL, &slot_ctrl);
 	ctrl_dbg(ctrl, "%s: SLOTCTRL %x value read %x\n", __func__,
 		 pci_pcie_cap(ctrl->pcie->port) + PCI_EXP_SLTCTL, slot_ctrl);
 
-	switch (slot_ctrl & PCI_EXP_SLTCTL_PCC) {
-	case PCI_EXP_SLTCTL_PWR_ON:
-		*status = 1;	/* On */
-		break;
-	case PCI_EXP_SLTCTL_PWR_OFF:
+	if (!ret &&
+	    ((slot_ctrl & PCI_EXP_SLTCTL_PCC) == PCI_EXP_SLTCTL_PWR_OFF))
 		*status = 0;	/* Off */
-		break;
-	default:
-		*status = 0xFF;
-		break;
-	}
 }
 
 void pciehp_get_latch_status(struct controller *ctrl, u8 *status)