[v2,23/59] drm/kmb: Additional register programming to update_plane

Message ID	1594760265-11618-24-git-send-email-anitha.chrisanthus@intel.com (mailing list archive)
State	New, archived
Headers	show Return-Path: <SRS0=MnHL=AZ=lists.freedesktop.org=intel-gfx-bounces@kernel.org> DMARC-Filter: OpenDMARC Filter v1.3.2 mail.kernel.org 88D352067D IronPort-SDR: t2VjZO69cJPfIsx/2wcOM7ePiv3SSiCShVUI958Nbti4zfPcgLAdcMIME6dt0/Fn5LHQ8fXRyw zGIKYJxBkXGw== IronPort-SDR: RZ3QCTJLOdUW/9woTpECfc1hzwXQtDSWhLHWcQ5oUm3h4b+uL7GtgDMMlbBVsss3decNPZufhI eOIInbLI8qPw== From: Anitha Chrisanthus <anitha.chrisanthus@intel.com> To: dri-devel@lists.freedesktop.org, anitha.chrisanthus@intel.com, bob.j.paauwe@intel.com, edmund.j.dea@intel.com Date: Tue, 14 Jul 2020 13:57:09 -0700 Message-Id: <1594760265-11618-24-git-send-email-anitha.chrisanthus@intel.com> In-Reply-To: <1594760265-11618-1-git-send-email-anitha.chrisanthus@intel.com> References: <1594760265-11618-1-git-send-email-anitha.chrisanthus@intel.com> Subject: [Intel-gfx] [PATCH v2 23/59] drm/kmb: Additional register programming to update_plane Precedence: list Cc: daniel.vetter@intel.com, intel-gfx@lists.freedesktop.org MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Errors-To: intel-gfx-bounces@lists.freedesktop.org Sender: "Intel-gfx" <intel-gfx-bounces@lists.freedesktop.org>
Series	Add support for KeemBay DRM driver \| expand [v2,00/59] Add support for KeemBay DRM driver [v2,01/59] drm/kmb: Add support for KeemBay Display [v2,02/59] drm/kmb: Added id to kmb_plane [v2,03/59] drm/kmb: Set correct values in the LAYERn_CFG register [v2,04/59] drm/kmb: Use biwise operators for register definitions [v2,05/59] drm/kmb: Updated kmb_plane_atomic_check [v2,06/59] drm/kmb: Initial check-in for Mipi DSI [v2,07/59] drm/kmb: Set OUT_FORMAT_CFG register [v2,08/59] drm/kmb: Added mipi_dsi_host initialization [v2,09/59] drm/kmb: Part 1 of Mipi Tx Initialization [v2,10/59] drm/kmb: Part 2 of Mipi Tx Initialization [v2,11/59] drm/kmb: Use correct mmio offset from data book [v2,12/59] drm/kmb: Part3 of Mipi Tx initialization [v2,13/59] drm/kmb: Part4 of Mipi Tx Initialization [v2,14/59] drm/kmb: Correct address offsets for mipi registers [v2,15/59] drm/kmb: Part5 of Mipi Tx Intitialization [v2,16/59] drm/kmb: Part6 of Mipi Tx Initialization [v2,17/59] drm/kmb: Part7 of Mipi Tx Initialization [v2,18/59] drm/kmb: Part8 of Mipi Tx Initialization [v2,19/59] drm/kmb: Added ioremap/iounmap for register access [v2,20/59] drm/kmb: Register IRQ for LCD [v2,21/59] drm/kmb: IRQ handlers for LCD and mipi dsi [v2,22/59] drm/kmb: Set hardcoded values to LCD_VSYNC_START [v2,23/59] drm/kmb: Additional register programming to update_plane [v2,24/59] drm/kmb: Add ADV7535 bridge [v2,25/59] drm/kmb: Display clock enable/disable [v2,26/59] drm/kmb: rebase to newer kernel version [v2,27/59] drm/kmb: minor name change to match device tree [v2,28/59] drm/kmb: Changed MMIO size [v2,29/59] drm/kmb: Defer Probe [v2,30/59] drm/kmb: call bridge init in the very beginning [v2,31/59] drm/kmb: Cleanup probe functions [v2,32/59] drm/kmb: Revert dsi_host back to a static variable [v2,33/59] drm/kmb: Initialize clocks for clk_msscam, clk_mipi_ecfg, & clk_mipi_cfg. [v2,34/59] drm/kmb: Enable MSS_CAM_CLK_CTRL for LCD and MIPI [v2,35/59] drm/kmb: Remove declaration of irq_lcd/irq_mipi [v2,36/59] drm/kmb: Enable MIPI TX HS Test Pattern Generation [v2,37/59] drm/kmb: Set MSS_CAM_RSTN_CTRL along with enable [v2,38/59] drm/kmb: Mipi DPHY initialization changes [v2,39/59] drm/kmb: Fixed driver unload [v2,40/59] drm/kmb: Added LCD_TEST config [v2,41/59] drm/kmb: Changes for LCD to Mipi [v2,42/59] drm/kmb: Update LCD programming to match MIPI [v2,43/59] drm/kmb: Changed name of driver to kmb-drm [v2,44/59] drm/kmb: Mipi settings from input timings [v2,45/59] drm/kmb: Enable LCD interrupts [v2,46/59] drm/kmb: Enable LCD interrupts during modeset [v2,47/59] drm/kmb: Don’t inadvertantly disable LCD controller [v2,48/59] drm/kmb: SWAP R and B LCD Layer order [v2,49/59] drm/kmb: Disable ping pong mode [v2,50/59] drm/kmb: Do the layer initializations only once [v2,51/59] drm/kmb: Write to LCD_LAYERn_CFG only once [v2,52/59] drm/kmb: Cleaned up code [v2,53/59] drm/kmb: disable the LCD layer in EOF irq handler [v2,54/59] drm/kmb: Initialize uninitialized variables [v2,55/59] drm/kmb: Added useful messages in LCD ISR [v2,56/59] kmb/drm: Prune unsupported modes [v2,57/59] drm/kmb: workaround for dma undeflow issue [v2,58/59] drm/kmb: Get System Clock from SCMI [v2,59/59] drm/kmb: work around for planar formats

diff --git a/drivers/gpu/drm/kmb/kmb_drv.h b/drivers/gpu/drm/kmb/kmb_drv.h index 1e81d44..586b53e 100644 --- a/drivers/gpu/drm/kmb/kmb_drv.h +++ b/drivers/gpu/drm/kmb/kmb_drv.h @@ -92,6 +92,22 @@ static inline u32 kmb_read_lcd(struct kmb_drm_private *dev_p, unsigned int reg) return readl(dev_p->lcd_mmio + reg); } +static inline void kmb_set_bitmask_lcd(struct kmb_drm_private *dev_p, + unsigned int reg, u32 mask) +{ + u32 reg_val = kmb_read_lcd(dev_p->lcd_mmio, reg); + + kmb_write_lcd(dev_p->lcd_mmio, reg, (reg_val | mask)); +} + +static inline void kmb_clr_bitmask_lcd(struct kmb_drm_private *dev_p, + unsigned int reg, u32 mask) +{ + u32 reg_val = kmb_read_lcd(dev_p->lcd_mmio, reg); + + kmb_write_lcd(dev_p->lcd_mmio, reg, (reg_val & (~mask))); +} + static inline u32 kmb_read_mipi(struct kmb_drm_private *dev_p, unsigned int reg) { return readl(dev_p->mipi_mmio + reg); diff --git a/drivers/gpu/drm/kmb/kmb_plane.c b/drivers/gpu/drm/kmb/kmb_plane.c index 946349a..2980764 100644 --- a/drivers/gpu/drm/kmb/kmb_plane.c +++ b/drivers/gpu/drm/kmb/kmb_plane.c @@ -56,6 +56,46 @@ static const u32 kmb_formats_v[] = { DRM_FORMAT_NV12, DRM_FORMAT_NV21, }; +#define LCD_INT_VL0_ERR (LAYER0_DMA_FIFO_UNDERFLOW | \ + LAYER0_DMA_FIFO_OVERFLOW | \ + LAYER0_DMA_CB_FIFO_OVERFLOW | \ + LAYER0_DMA_CB_FIFO_UNDERFLOW | \ + LAYER0_DMA_CR_FIFO_OVERFLOW | \ + LAYER0_DMA_CR_FIFO_UNDERFLOW) + +#define LCD_INT_VL1_ERR (LAYER1_DMA_FIFO_UNDERFLOW | \ + LAYER1_DMA_FIFO_OVERFLOW | \ + LAYER1_DMA_CB_FIFO_OVERFLOW | \ + LAYER1_DMA_CB_FIFO_UNDERFLOW | \ + LAYER1_DMA_CR_FIFO_OVERFLOW | \ + LAYER1_DMA_CR_FIFO_UNDERFLOW) + +#define LCD_INT_GL0_ERR (LAYER2_DMA_FIFO_OVERFLOW | LAYER2_DMA_FIFO_UNDERFLOW) + +#define LCD_INT_GL1_ERR (LAYER3_DMA_FIFO_OVERFLOW | LAYER3_DMA_FIFO_UNDERFLOW) + +#define LCD_INT_VL0 (LAYER0_DMA_DONE | LAYER0_DMA_IDLE | LCD_INT_VL0_ERR) + +#define LCD_INT_VL1 (LAYER1_DMA_DONE | LAYER1_DMA_IDLE | LCD_INT_VL1_ERR) + +#define LCD_INT_GL0 (LAYER2_DMA_DONE | LAYER2_DMA_IDLE | LCD_INT_GL0_ERR) + +#define LCD_INT_GL1 (LAYER3_DMA_DONE | LAYER3_DMA_IDLE | LCD_INT_GL1_ERR) + +const uint32_t layer_irqs[] = { + LCD_INT_VL0, + LCD_INT_VL1, + LCD_INT_GL0, + LCD_INT_GL1 + }; +/*Conversion (yuv->rgb) matrix from myriadx */ +static const u32 csc_coef_lcd[] = { + 1024, 0, 1436, + 1024, -352, -731, + 1024, 1814, 0, + -179, 125, -226 +}; + static unsigned int check_pixel_format(struct drm_plane *plane, u32 format) { int i; @@ -197,6 +237,24 @@ unsigned int set_bits_per_pixel(const struct drm_format_info *format) return val; } +static void config_csc(struct kmb_drm_private *dev_p, int plane_id) +{ + /*YUV to RGB conversion using the fixed matrix csc_coef_lcd */ + kmb_write_lcd(dev_p, LCD_LAYERn_CSC_COEFF11(plane_id), csc_coef_lcd[0]); + kmb_write_lcd(dev_p, LCD_LAYERn_CSC_COEFF12(plane_id), csc_coef_lcd[1]); + kmb_write_lcd(dev_p, LCD_LAYERn_CSC_COEFF13(plane_id), csc_coef_lcd[2]); + kmb_write_lcd(dev_p, LCD_LAYERn_CSC_COEFF21(plane_id), csc_coef_lcd[3]); + kmb_write_lcd(dev_p, LCD_LAYERn_CSC_COEFF22(plane_id), csc_coef_lcd[4]); + kmb_write_lcd(dev_p, LCD_LAYERn_CSC_COEFF23(plane_id), csc_coef_lcd[5]); + kmb_write_lcd(dev_p, LCD_LAYERn_CSC_COEFF31(plane_id), csc_coef_lcd[6]); + kmb_write_lcd(dev_p, LCD_LAYERn_CSC_COEFF32(plane_id), csc_coef_lcd[7]); + kmb_write_lcd(dev_p, LCD_LAYERn_CSC_COEFF33(plane_id), csc_coef_lcd[8]); + kmb_write_lcd(dev_p, LCD_LAYERn_CSC_OFF1(plane_id), csc_coef_lcd[9]); + kmb_write_lcd(dev_p, LCD_LAYERn_CSC_OFF2(plane_id), csc_coef_lcd[10]); + kmb_write_lcd(dev_p, LCD_LAYERn_CSC_OFF3(plane_id), csc_coef_lcd[11]); + kmb_set_bitmask_lcd(dev_p, LCD_LAYERn_CFG(plane_id), LCD_LAYER_CSC_EN); +} + static void kmb_plane_atomic_update(struct drm_plane *plane, struct drm_plane_state *state) { @@ -211,6 +269,7 @@ static void kmb_plane_atomic_update(struct drm_plane *plane, unsigned int ctrl = 0, val = 0, out_format = 0; unsigned int src_w, src_h, crtc_x, crtc_y; unsigned char plane_id = kmb_plane->id; + int num_planes = fb->format->num_planes; if (!fb) return; @@ -229,68 +288,122 @@ static void kmb_plane_atomic_update(struct drm_plane *plane, val = set_pixel_format(fb->format->format); val |= set_bits_per_pixel(fb->format); - /*CHECKME Leon drvr sets it to 50 try this for now */ - val |= LCD_LAYER_FIFO_50; + /*CHECKME Leon drvr sets it to 100 try this for now */ + val |= LCD_LAYER_FIFO_100; kmb_write_lcd(dev_p, LCD_LAYERn_CFG(plane_id), val); - switch (plane_id) { - case LAYER_0: - ctrl = LCD_CTRL_VL1_ENABLE; - break; - case LAYER_1: - ctrl = LCD_CTRL_VL2_ENABLE; - break; - case LAYER_2: - ctrl = LCD_CTRL_GL1_ENABLE; - break; - case LAYER_3: - ctrl = LCD_CTRL_GL2_ENABLE; - break; - } - - ctrl |= LCD_CTRL_ENABLE; - ctrl |= LCD_CTRL_PROGRESSIVE | LCD_CTRL_TIM_GEN_ENABLE - | LCD_CTRL_OUTPUT_ENABLED; - kmb_write_lcd(dev_p, LCD_CONTROL, ctrl); + /*re-initialize interrupts */ + kmb_clr_bitmask_lcd(dev_p, LCD_INT_ENABLE, layer_irqs[plane_id]); + kmb_set_bitmask_lcd(dev_p, LCD_INT_CLEAR, layer_irqs[plane_id]); + kmb_set_bitmask_lcd(dev_p, LCD_INT_ENABLE, layer_irqs[plane_id]); /*TBD check visible? */ - /* we may have to set LCD_DMA_VSTRIDE_ENABLE in the future */ dma_cfg = LCD_DMA_LAYER_ENABLE | LCD_DMA_LAYER_AUTO_UPDATE - | LCD_DMA_LAYER_CONT_UPDATE | LCD_DMA_LAYER_AXI_BURST_1; + | LCD_DMA_LAYER_CONT_UPDATE | LCD_DMA_LAYER_AXI_BURST_1 + | LCD_DMA_LAYER_VSTRIDE_EN; /* disable DMA first */ kmb_write_lcd(dev_p, LCD_LAYERn_DMA_CFG(plane_id), ~LCD_DMA_LAYER_ENABLE); - addr = drm_fb_cma_get_gem_addr(fb, plane->state, plane_id); + /* pinpong mode is enabled - at the end of DMA transfer, start new + * transfer alternatively using main and shadow register settings. + * So update both main and shadow registers + */ + addr = drm_fb_cma_get_gem_addr(fb, plane->state, 0); kmb_write_lcd(dev_p, LCD_LAYERn_DMA_START_ADDR(plane_id), addr); kmb_write_lcd(dev_p, LCD_LAYERn_DMA_START_SHADOW(plane_id), addr); width = fb->width; height = fb->height; - dma_len = width * height * fb->format->cpp[plane_id]; + dma_len = width * height * fb->format->cpp[0]; kmb_write_lcd(dev_p, LCD_LAYERn_DMA_LEN(plane_id), dma_len); + kmb_write_lcd(dev_p, LCD_LAYERn_DMA_LEN_SHADOW(plane_id), dma_len); kmb_write_lcd(dev_p, LCD_LAYERn_DMA_LINE_VSTRIDE(plane_id), - fb->pitches[plane_id]); + fb->pitches[0]); kmb_write_lcd(dev_p, LCD_LAYERn_DMA_LINE_WIDTH(plane_id), - (width*fb->format->cpp[plane_id])); + (width*fb->format->cpp[0])); + + /*program Cb/Cr for planar formats*/ + if (num_planes > 1) { + if (fb->format->format == DRM_FORMAT_YUV420 || + fb->format->format == DRM_FORMAT_YVU420) + width /= 2; + addr = drm_fb_cma_get_gem_addr(fb, plane->state, LAYER_1); + kmb_write_lcd(dev_p, LCD_LAYERn_DMA_START_CB_ADR(plane_id), + addr); + kmb_write_lcd(dev_p, LCD_LAYERn_DMA_START_CB_SHADOW(plane_id), + addr); + kmb_write_lcd(dev_p, + LCD_LAYERn_DMA_CB_LINE_VSTRIDE(plane_id), + fb->pitches[LAYER_1]); + kmb_write_lcd(dev_p, + LCD_LAYERn_DMA_CB_LINE_WIDTH(plane_id), + (width*fb->format->cpp[0])); + if (num_planes == 3) { + addr = drm_fb_cma_get_gem_addr(fb, plane->state, + LAYER_2); + kmb_write_lcd(dev_p, + LCD_LAYERn_DMA_START_CR_ADR(plane_id), + addr); + kmb_write_lcd(dev_p, + LCD_LAYERn_DMA_START_CR_SHADOW(plane_id), + addr); + kmb_write_lcd(dev_p, + LCD_LAYERn_DMA_CR_LINE_VSTRIDE(plane_id), + fb->pitches[LAYER_2]); + kmb_write_lcd(dev_p, + LCD_LAYERn_DMA_CR_LINE_WIDTH(plane_id), + (width*fb->format->cpp[0])); + } + } /* enable DMA */ kmb_write_lcd(dev_p, LCD_LAYERn_DMA_CFG(plane_id), dma_cfg); - /* FIXME no doc on how to set output format - may need to change - * this later + switch (plane_id) { + case LAYER_0: + ctrl = LCD_CTRL_VL1_ENABLE; + break; + case LAYER_1: + ctrl = LCD_CTRL_VL2_ENABLE; + break; + case LAYER_2: + ctrl = LCD_CTRL_GL1_ENABLE; + break; + case LAYER_3: + ctrl = LCD_CTRL_GL2_ENABLE; + break; + } + + ctrl |= LCD_CTRL_ENABLE; + ctrl |= LCD_CTRL_PROGRESSIVE | LCD_CTRL_TIM_GEN_ENABLE + | LCD_CTRL_CONTINUOUS | LCD_CTRL_OUTPUT_ENABLED; + + /*LCD is connected to MIPI on kmb + * Therefore this bit is required for DSI Tx + */ + ctrl |= LCD_CTRL_VHSYNC_IDLE_LVL; + + kmb_write_lcd(dev_p, LCD_CONTROL, ctrl); + + /* FIXME no doc on how to set output format,these values are taken + * from the Myriadx tests */ - if (val & LCD_LAYER_BGR_ORDER) - out_format |= LCD_OUTF_BGR_ORDER; - else if (val & LCD_LAYER_CRCB_ORDER) - out_format |= LCD_OUTF_CRCB_ORDER; + out_format |= LCD_OUTF_FORMAT_RGB888; + + if (val & LCD_LAYER_PLANAR_STORAGE) { + /*enable CSC if input is planar and output is RGB */ + config_csc(dev_p, plane_id); + } + + /*set background color to white*/ + kmb_write_lcd(dev_p, LCD_BG_COLOUR_LS, 0xffffff); + /*leave RGB order,conversion mode and clip mode to default*/ /* do not interleave RGB channels for mipi Tx compatibility */ out_format |= LCD_OUTF_MIPI_RGB_MODE; - /* pixel format from LCD_LAYER_CFG */ - out_format |= ((val >> 9) & 0x1F); kmb_write_lcd(dev_p, LCD_OUT_FORMAT_CFG, out_format); } diff --git a/drivers/gpu/drm/kmb/kmb_regs.h b/drivers/gpu/drm/kmb/kmb_regs.h index 7c6feba..85b55cb 100644 --- a/drivers/gpu/drm/kmb/kmb_regs.h +++ b/drivers/gpu/drm/kmb/kmb_regs.h @@ -45,7 +45,8 @@ #define LCD_CTRL_ALPHA_BOTTOM_GL1 (2<<12) #define LCD_CTRL_ALPHA_BOTTOM_GL2 (3<<12) #define LCD_CTRL_TIM_GEN_ENABLE (1<<14) -#define LCD_CTRL_DISPLAY_MODE_ONE_SHOT (1<<15) +#define LCD_CTRL_CONTINUOUS (0<<15) +#define LCD_CTRL_ONE_SHOT (1<<15) #define LCD_CTRL_PWM0_EN (1<<16) #define LCD_CTRL_PWM1_EN (1<<17) #define LCD_CTRL_PWM2_EN (1<<18) @@ -54,36 +55,37 @@ #define LCD_CTRL_BPORCH_ENABLE (1<<21) #define LCD_CTRL_FPORCH_ENABLE (1<<22) #define LCD_CTRL_PIPELINE_DMA (1<<28) +#define LCD_CTRL_VHSYNC_IDLE_LVL (1<<31) /*interrupts */ #define LCD_INT_STATUS (0x4 * 0x001) #define LCD_INT_EOF (1<<0) #define LCD_INT_LINE_CMP (1<<1) #define LCD_INT_VERT_COMP (1<<2) -#define LAYER0_DMA_DONE_BIT (1<<3) -#define LAYER0_DMA_IDLE_BIT (1<<4) -#define LAYER0_DMA_OVERFLOW_BIT (1<<5) -#define LAYER0_DMA_FIFO_UNDERFLOW_BIT (1<<6) -#define LAYER0_DMA_CB_FIFO_OVERFLOW_BIT (1<<7) -#define LAYER0_DMA_CB_FIFO_UNDERFLOW_BIT (1<<8) -#define LAYER0_DMA_CR_FIFO_OVERFLOW_BIT (1<<9) -#define LAYER0_DMA_CR_FIFO_UNDERFLOW_BIT (1<<10) -#define LAYER1_DMA_DONE_BIT (1<<11) -#define LAYER1_DMA_IDLE_BIT (1<<12) -#define LAYER1_DMA_OVERFLOW_BIT (1<<13) -#define LAYER1_DMA_FIFO_UNDERFLOW_BIT (1<<14) -#define LAYER1_DMA_CB_FIFO_OVERFLOW_BIT (1<<15) -#define LAYER1_DMA_CB_FIFO_UNDERFLOW_BIT (1<<16) -#define LAYER1_DMA_CR_FIFO_OVERFLOW_BIT (1<<17) -#define LAYER1_DMA_CR_FIFO_UNDERFLOW_BIT (1<<18) -#define LAYER2_DMA_DONE_BIT (1<<19) -#define LAYER2_DMA_IDLE_BIT (1<<20) -#define LAYER2_DMA_OVERFLOW_BIT (1<<21) -#define LAYER2_DMA_FIFO_UNDERFLOW_BIT (1<<22) -#define LAYER3_DMA_DONE_BIT (1<<23) -#define LAYER3_DMA_IDLE_BIT (1<<24) -#define LAYER3_DMA_OVERFLOW_BIT (1<<25) -#define LAYER3_DMA_FIFO_UNDERFLOW_BIT (1<<26) +#define LAYER0_DMA_DONE (1<<3) +#define LAYER0_DMA_IDLE (1<<4) +#define LAYER0_DMA_FIFO_OVERFLOW (1<<5) +#define LAYER0_DMA_FIFO_UNDERFLOW (1<<6) +#define LAYER0_DMA_CB_FIFO_OVERFLOW (1<<7) +#define LAYER0_DMA_CB_FIFO_UNDERFLOW (1<<8) +#define LAYER0_DMA_CR_FIFO_OVERFLOW (1<<9) +#define LAYER0_DMA_CR_FIFO_UNDERFLOW (1<<10) +#define LAYER1_DMA_DONE (1<<11) +#define LAYER1_DMA_IDLE (1<<12) +#define LAYER1_DMA_FIFO_OVERFLOW (1<<13) +#define LAYER1_DMA_FIFO_UNDERFLOW (1<<14) +#define LAYER1_DMA_CB_FIFO_OVERFLOW (1<<15) +#define LAYER1_DMA_CB_FIFO_UNDERFLOW (1<<16) +#define LAYER1_DMA_CR_FIFO_OVERFLOW (1<<17) +#define LAYER1_DMA_CR_FIFO_UNDERFLOW (1<<18) +#define LAYER2_DMA_DONE (1<<19) +#define LAYER2_DMA_IDLE (1<<20) +#define LAYER2_DMA_FIFO_OVERFLOW (1<<21) +#define LAYER2_DMA_FIFO_UNDERFLOW (1<<22) +#define LAYER3_DMA_DONE (1<<23) +#define LAYER3_DMA_IDLE (1<<24) +#define LAYER3_DMA_FIFO_OVERFLOW (1<<25) +#define LAYER3_DMA_FIFO_UNDERFLOW (1<<26) #define LCD_INT_ENABLE (0x4 * 0x002) #define LCD_INT_CLEAR (0x4 * 0x003) @@ -251,7 +253,7 @@ #define LCD_DMA_LAYER_AXI_BURST_14 (0xe<<5) #define LCD_DMA_LAYER_AXI_BURST_15 (0xf<<5) #define LCD_DMA_LAYER_AXI_BURST_16 (0x10<<5) -#define LCD_DMA_LAYER_V_STRIDE_EN (1<<10) +#define LCD_DMA_LAYER_VSTRIDE_EN (1<<10) #define LCD_LAYER0_DMA_START_ADR (0x4 * 0x118) #define LCD_LAYERn_DMA_START_ADDR(N) (LCD_LAYER0_DMA_START_ADR \ @@ -280,13 +282,30 @@ #define LCD_LAYER0_CFG2 (0x4 * 0x120) #define LCD_LAYERn_CFG2(N) (LCD_LAYER0_CFG2 + (0x400*N)) #define LCD_LAYER0_DMA_START_CB_ADR (0x4 * 0x700) +#define LCD_LAYERn_DMA_START_CB_ADR(N) (LCD_LAYER0_DMA_START_CB_ADR + \ + (0x20*N)) #define LCD_LAYER0_DMA_START_CB_SHADOW (0x4 * 0x701) +#define LCD_LAYERn_DMA_START_CB_SHADOW(N) (LCD_LAYER0_DMA_START_CB_SHADOW\ + + (0x20*N)) #define LCD_LAYER0_DMA_CB_LINE_WIDTH (0x4 * 0x702) +#define LCD_LAYERn_DMA_CB_LINE_WIDTH(N) (LCD_LAYER0_DMA_CB_LINE_WIDTH +\ + (0x20*N)) #define LCD_LAYER0_DMA_CB_LINE_VSTRIDE (0x4 * 0x703) +#define LCD_LAYERn_DMA_CB_LINE_VSTRIDE(N) (LCD_LAYER0_DMA_CB_LINE_VSTRIDE\ + + (0x20*N)) #define LCD_LAYER0_DMA_START_CR_ADR (0x4 * 0x704) +#define LCD_LAYERn_DMA_START_CR_ADR(N) (LCD_LAYER0_DMA_START_CR_ADR + \ + (0x20*N)) #define LCD_LAYER0_DMA_START_CR_SHADOW (0x4 * 0x705) +#define LCD_LAYERn_DMA_START_CR_SHADOW(N) \ + (LCD_LAYER0_DMA_START_CR_SHADOW\ + + (0x20*N)) #define LCD_LAYER0_DMA_CR_LINE_WIDTH (0x4 * 0x706) +#define LCD_LAYERn_DMA_CR_LINE_WIDTH(N) (LCD_LAYER0_DMA_CR_LINE_WIDTH +\ + (0x20*N)) #define LCD_LAYER0_DMA_CR_LINE_VSTRIDE (0x4 * 0x707) +#define LCD_LAYERn_DMA_CR_LINE_VSTRIDE(N) (LCD_LAYER0_DMA_CR_LINE_VSTRIDE\ + + (0x20*N)) #define LCD_LAYER1_DMA_START_CB_ADR (0x4 * 0x708) #define LCD_LAYER1_DMA_START_CB_SHADOW (0x4 * 0x709) #define LCD_LAYER1_DMA_CB_LINE_WIDTH (0x4 * 0x70a) @@ -330,6 +349,7 @@ #define LCD_OUTF_BGR_ORDER (1 << 5) #define LCD_OUTF_Y_ORDER (1 << 6) #define LCD_OUTF_CRCB_ORDER (1 << 7) +#define LCD_OUTF_RGB_CONV_MODE (1 << 14) #define LCD_OUTF_MIPI_RGB_MODE (1 << 18) #define LCD_HSYNC_WIDTH (0x4 * 0x801)

[v2,23/59] drm/kmb: Additional register programming to update_plane

Commit Message

Patch