diff mbox series

[v6,4/7] arm64: dts: rk3399pro: vmarc-som: Move common properties into Carrier

Message ID 20200715083418.112003-5-jagan@amarulasolutions.com (mailing list archive)
State New, archived
Headers show
Series ARM: dts: rockchip: Radxa Rock Pi N8 initial support | expand

Commit Message

Jagan Teki July 15, 2020, 8:34 a.m. UTC
Some of gmac, sdmmc node properties are common across rk3288 and
rk3399pro SOM's so move them into Carrier dtsi.

Chosen node is specific to rk3399pro configure SBC, so move it into
RockPI N10 dts.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
Changes for v6:
- spilt of previous version Trivial patch

 .../dts/rockchip-radxa-dalang-carrier.dtsi    | 18 ++++++++++++----
 .../dts/rockchip/rk3399pro-rock-pi-n10.dts    |  4 ++++
 .../dts/rockchip/rk3399pro-vmarc-som.dtsi     | 21 +++++--------------
 3 files changed, 23 insertions(+), 20 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/rockchip-radxa-dalang-carrier.dtsi b/arch/arm/boot/dts/rockchip-radxa-dalang-carrier.dtsi
index 00b200a62263..450e5bb5af0b 100644
--- a/arch/arm/boot/dts/rockchip-radxa-dalang-carrier.dtsi
+++ b/arch/arm/boot/dts/rockchip-radxa-dalang-carrier.dtsi
@@ -8,8 +8,11 @@ 
 #include <dt-bindings/pwm/pwm.h>
 
 / {
-	chosen {
-		stdout-path = "serial2:1500000n8";
+	clkin_gmac: external-gmac-clock {
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+		clock-output-names = "clkin_gmac";
+		#clock-cells = <0>;
 	};
 
 	vcc12v_dcin: vcc12v-dcin-regulator {
@@ -33,6 +36,15 @@  vcc5v0_sys: vcc5v0-sys-regulator {
 };
 
 &gmac {
+	assigned-clock-parents = <&clkin_gmac>;
+	clock_in_out = "input";
+	phy-mode = "rgmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 50000>;
+	tx_delay = <0x28>;
+	rx_delay = <0x11>;
 	status = "okay";
 };
 
@@ -48,10 +60,8 @@  &sdmmc {
 	bus-width = <4>;
 	cap-mmc-highspeed;
 	cap-sd-highspeed;
-	cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
 	disable-wp;
 	vqmmc-supply = <&vccio_sd>;
-	max-frequency = <150000000>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
 	status = "okay";
diff --git a/arch/arm64/boot/dts/rockchip/rk3399pro-rock-pi-n10.dts b/arch/arm64/boot/dts/rockchip/rk3399pro-rock-pi-n10.dts
index 539f4005386d..369de5dc0ebd 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399pro-rock-pi-n10.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399pro-rock-pi-n10.dts
@@ -15,4 +15,8 @@  / {
 	model = "Radxa ROCK Pi N10";
 	compatible = "radxa,rockpi-n10", "vamrs,rk3399pro-vmarc-som",
 		     "rockchip,rk3399pro";
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
 };
diff --git a/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi b/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi
index d8fa8127d9dc..37ed95d5f7e9 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi
@@ -11,13 +11,6 @@ 
 
 / {
 	compatible = "vamrs,rk3399pro-vmarc-som", "rockchip,rk3399pro";
-
-	clkin_gmac: external-gmac-clock {
-		compatible = "fixed-clock";
-		clock-frequency = <125000000>;
-		clock-output-names = "clkin_gmac";
-		#clock-cells = <0>;
-	};
 };
 
 &cpu_l0 {
@@ -42,17 +35,8 @@  &emmc_phy {
 
 &gmac {
 	assigned-clocks = <&cru SCLK_RMII_SRC>;
-	assigned-clock-parents = <&clkin_gmac>;
-	clock_in_out = "input";
 	phy-supply = <&vcc_lan>;
-	phy-mode = "rgmii";
-	pinctrl-names = "default";
-	pinctrl-0 = <&rgmii_pins>;
 	snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
-	snps,reset-active-low;
-	snps,reset-delays-us = <0 10000 50000>;
-	tx_delay = <0x28>;
-	rx_delay = <0x11>;
 };
 
 &i2c0 {
@@ -335,6 +319,11 @@  &sdhci {
 	status = "okay";
 };
 
+&sdmmc {
+	cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
+	max-frequency = <150000000>;
+};
+
 &tsadc {
 	rockchip,hw-tshut-mode = <1>;
 	rockchip,hw-tshut-polarity = <1>;