[v2] gpio: omap: handle pin config bias flags
diff mbox series

Message ID 20200715213738.1640030-1-drew@beagleboard.org
State New
Headers show
Series
  • [v2] gpio: omap: handle pin config bias flags
Related show

Commit Message

Drew Fustini July 15, 2020, 9:37 p.m. UTC
Modify omap_gpio_set_config() to handle pin config bias flags by calling
gpiochip_generic_config().

The pin group for the gpio line must have the corresponding pinconf
properties:

PIN_CONFIG_BIAS_PULL_UP requires "pinctrl-single,bias-pullup"
PIN_CONFIG_BIAS_PULL_DOWN requires "pinctrl-single,bias-pulldown"

This is necessary for pcs_pinconf_set() to find the requested bias
parameter in the PIN_MAP_TYPE_CONFIGS_GROUP pinctrl map.

Acked-by: Grygorii Strashko <grygorii.strashko@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Drew Fustini <drew@beagleboard.org>
---
v2 change:
- simplify handling of -ENOTSUPP return value per Grygorii's suggestion

 drivers/gpio/gpio-omap.c | 17 +++++++++++++----
 1 file changed, 13 insertions(+), 4 deletions(-)

Comments

Linus Walleij July 16, 2020, 8:29 a.m. UTC | #1
On Wed, Jul 15, 2020 at 11:37 PM Drew Fustini <drew@beagleboard.org> wrote:

> Modify omap_gpio_set_config() to handle pin config bias flags by calling
> gpiochip_generic_config().
>
> The pin group for the gpio line must have the corresponding pinconf
> properties:
>
> PIN_CONFIG_BIAS_PULL_UP requires "pinctrl-single,bias-pullup"
> PIN_CONFIG_BIAS_PULL_DOWN requires "pinctrl-single,bias-pulldown"
>
> This is necessary for pcs_pinconf_set() to find the requested bias
> parameter in the PIN_MAP_TYPE_CONFIGS_GROUP pinctrl map.
>
> Acked-by: Grygorii Strashko <grygorii.strashko@ti.com>
> Acked-by: Tony Lindgren <tony@atomide.com>
> Signed-off-by: Drew Fustini <drew@beagleboard.org>

This v2 version applied!

Yours,
Linus Walleij
Drew Fustini July 17, 2020, 12:40 p.m. UTC | #2
On Thu, Jul 16, 2020 at 10:29:30AM +0200, Linus Walleij wrote:
> On Wed, Jul 15, 2020 at 11:37 PM Drew Fustini <drew@beagleboard.org> wrote:
> 
> > Modify omap_gpio_set_config() to handle pin config bias flags by calling
> > gpiochip_generic_config().
> >
> > The pin group for the gpio line must have the corresponding pinconf
> > properties:
> >
> > PIN_CONFIG_BIAS_PULL_UP requires "pinctrl-single,bias-pullup"
> > PIN_CONFIG_BIAS_PULL_DOWN requires "pinctrl-single,bias-pulldown"
> >
> > This is necessary for pcs_pinconf_set() to find the requested bias
> > parameter in the PIN_MAP_TYPE_CONFIGS_GROUP pinctrl map.
> >
> > Acked-by: Grygorii Strashko <grygorii.strashko@ti.com>
> > Acked-by: Tony Lindgren <tony@atomide.com>
> > Signed-off-by: Drew Fustini <drew@beagleboard.org>
> 
> This v2 version applied!
> 
> Yours,
> Linus Walleij

Thanks! 

I'm curious which branch should I look in to find it?

I didn't see it in any of the branches in:
https://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio.git/refs/

-Drew
Drew Fustini July 17, 2020, 12:45 p.m. UTC | #3
On Fri, Jul 17, 2020 at 02:40:48PM +0200, Drew Fustini wrote:
> On Thu, Jul 16, 2020 at 10:29:30AM +0200, Linus Walleij wrote:
> > On Wed, Jul 15, 2020 at 11:37 PM Drew Fustini <drew@beagleboard.org> wrote:
> > 
> > > Modify omap_gpio_set_config() to handle pin config bias flags by calling
> > > gpiochip_generic_config().
> > >
> > > The pin group for the gpio line must have the corresponding pinconf
> > > properties:
> > >
> > > PIN_CONFIG_BIAS_PULL_UP requires "pinctrl-single,bias-pullup"
> > > PIN_CONFIG_BIAS_PULL_DOWN requires "pinctrl-single,bias-pulldown"
> > >
> > > This is necessary for pcs_pinconf_set() to find the requested bias
> > > parameter in the PIN_MAP_TYPE_CONFIGS_GROUP pinctrl map.
> > >
> > > Acked-by: Grygorii Strashko <grygorii.strashko@ti.com>
> > > Acked-by: Tony Lindgren <tony@atomide.com>
> > > Signed-off-by: Drew Fustini <drew@beagleboard.org>
> > 
> > This v2 version applied!
> > 
> > Yours,
> > Linus Walleij
> 
> Thanks! 
> 
> I'm curious which branch should I look in to find it?
> 
> I didn't see it in any of the branches in:
> https://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio.git/refs/
> 
> -Drew

Oh, nevermind.  I found it in linux-pinctrl:
https://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl.git/commit/?h=for-next&id=40e30d26d909af89de2dcd0b4abdd27c47ac2235

Thanks,
Drew
Andy Shevchenko July 17, 2020, 3:15 p.m. UTC | #4
On Thu, Jul 16, 2020 at 12:38 AM Drew Fustini <drew@beagleboard.org> wrote:
>
> Modify omap_gpio_set_config() to handle pin config bias flags by calling
> gpiochip_generic_config().
>
> The pin group for the gpio line must have the corresponding pinconf
> properties:
>
> PIN_CONFIG_BIAS_PULL_UP requires "pinctrl-single,bias-pullup"
> PIN_CONFIG_BIAS_PULL_DOWN requires "pinctrl-single,bias-pulldown"
>
> This is necessary for pcs_pinconf_set() to find the requested bias
> parameter in the PIN_MAP_TYPE_CONFIGS_GROUP pinctrl map.

...

> +       if ((pinconf_to_config_param(config) == PIN_CONFIG_BIAS_DISABLE) ||
> +           (pinconf_to_config_param(config) == PIN_CONFIG_BIAS_PULL_UP) ||
> +           (pinconf_to_config_param(config) == PIN_CONFIG_BIAS_PULL_DOWN))
> +       {
> +               ret = gpiochip_generic_config(chip, offset, config);
> +       }
> +       else if (pinconf_to_config_param(config) == PIN_CONFIG_INPUT_DEBOUNCE)
> +       {
> +               debounce = pinconf_to_config_argument(config);
> +               ret = omap_gpio_debounce(chip, offset, debounce);
> +       }

It's a rather strange indentation of the curly braces. Don't you run checkpatch?
Drew Fustini July 17, 2020, 7:42 p.m. UTC | #5
On Fri, Jul 17, 2020 at 08:56:45PM +0200, Drew Fustini wrote:
> On Fri, Jul 17, 2020, 17:15 Andy Shevchenko <andy.shevchenko@gmail.com>
> wrote:
> 
> > On Thu, Jul 16, 2020 at 12:38 AM Drew Fustini <drew@beagleboard.org>
> > wrote:
> > >
> > > Modify omap_gpio_set_config() to handle pin config bias flags by calling
> > > gpiochip_generic_config().
> > >
> > > The pin group for the gpio line must have the corresponding pinconf
> > > properties:
> > >
> > > PIN_CONFIG_BIAS_PULL_UP requires "pinctrl-single,bias-pullup"
> > > PIN_CONFIG_BIAS_PULL_DOWN requires "pinctrl-single,bias-pulldown"
> > >
> > > This is necessary for pcs_pinconf_set() to find the requested bias
> > > parameter in the PIN_MAP_TYPE_CONFIGS_GROUP pinctrl map.
> >
> > ...
> >
> > > +       if ((pinconf_to_config_param(config) == PIN_CONFIG_BIAS_DISABLE)
> > ||
> > > +           (pinconf_to_config_param(config) == PIN_CONFIG_BIAS_PULL_UP)
> > ||
> > > +           (pinconf_to_config_param(config) ==
> > PIN_CONFIG_BIAS_PULL_DOWN))
> > > +       {
> > > +               ret = gpiochip_generic_config(chip, offset, config);
> > > +       }
> > > +       else if (pinconf_to_config_param(config) ==
> > PIN_CONFIG_INPUT_DEBOUNCE)
> > > +       {
> > > +               debounce = pinconf_to_config_argument(config);
> > > +               ret = omap_gpio_debounce(chip, offset, debounce);
> > > +       }
> >
> > It's a rather strange indentation of the curly braces. Don't you run
> > checkpatch?
> >
> > --
> > With Best Regards,
> > Andy Shevchenko
> >
> 
> Thanks for pointing that out.  I should have caught that.
> 
> Linus - I submitted a v2 with the braces fixed.  Please let me know if I
> should send a patch just for the braces on top of what is already in
> for-next.
> 
> Thanks,
> Drew

Sorry for the noise.  I failed to realize that I had already sent v2
(regarding the handling of the return value).  I have now submitted v3
patch [0] to fix the braces formatting that Andy pointed out.

thanks,
drew

[0] https://lore.kernel.org/linux-omap/20200717194043.1774643-1-drew@beagleboard.org/
Linus Walleij July 20, 2020, 2:05 p.m. UTC | #6
On Fri, Jul 17, 2020 at 9:42 PM Drew Fustini <drew@beagleboard.org> wrote:

> Sorry for the noise.  I failed to realize that I had already sent v2
> (regarding the handling of the return value).  I have now submitted v3
> patch [0] to fix the braces formatting that Andy pointed out.

Oh, OK I applied the v3 instead. To the GPIO tree.

Yours,
Linus Walleij

Patch
diff mbox series

diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c
index b8e2ecc3eade..eba303cff7cb 100644
--- a/drivers/gpio/gpio-omap.c
+++ b/drivers/gpio/gpio-omap.c
@@ -896,12 +896,21 @@  static int omap_gpio_set_config(struct gpio_chip *chip, unsigned offset,
 				unsigned long config)
 {
 	u32 debounce;
+	int ret = -ENOTSUPP;
 
-	if (pinconf_to_config_param(config) != PIN_CONFIG_INPUT_DEBOUNCE)
-		return -ENOTSUPP;
+	if ((pinconf_to_config_param(config) == PIN_CONFIG_BIAS_DISABLE) ||
+	    (pinconf_to_config_param(config) == PIN_CONFIG_BIAS_PULL_UP) ||
+	    (pinconf_to_config_param(config) == PIN_CONFIG_BIAS_PULL_DOWN))
+	{
+		ret = gpiochip_generic_config(chip, offset, config);
+	}
+	else if (pinconf_to_config_param(config) == PIN_CONFIG_INPUT_DEBOUNCE)
+	{
+		debounce = pinconf_to_config_argument(config);
+		ret = omap_gpio_debounce(chip, offset, debounce);
+	}
 
-	debounce = pinconf_to_config_argument(config);
-	return omap_gpio_debounce(chip, offset, debounce);
+	return ret;
 }
 
 static void omap_gpio_set(struct gpio_chip *chip, unsigned offset, int value)