[2/2] ASoC: fsl_asrc: always use internal ratio
diff mbox series

Message ID 20200716145201.186270-3-arnaud.ferraris@collabora.com
State New
Headers show
  • ASoC: fsl_asrc: improve clock selection and quality
Related show

Commit Message

Arnaud Ferraris July 16, 2020, 2:52 p.m. UTC
Even though the current driver calculates the dividers to be used
depending on the clocks and sample rates, enabling the internal ratio
can lead to noticeable improvements in the audio quality, based on my

As stated in the documentation, "When USRx=1 and IDRx=0, ASRC internal
measured ratio will be used", so setting this bit even when not in
"Ideal Ratio" mode still makes sense.

Signed-off-by: Arnaud Ferraris <arnaud.ferraris@collabora.com>
 sound/soc/fsl/fsl_asrc.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff mbox series

diff --git a/sound/soc/fsl/fsl_asrc.c b/sound/soc/fsl/fsl_asrc.c
index bfd35b9c0781..cc0f70c9140f 100644
--- a/sound/soc/fsl/fsl_asrc.c
+++ b/sound/soc/fsl/fsl_asrc.c
@@ -465,7 +465,7 @@  static int fsl_asrc_config_pair(struct fsl_asrc_pair *pair, bool use_ideal_rate)
 	regmap_update_bits(asrc->regmap, REG_ASRCTR,
 			   ASRCTR_ATSi_MASK(index), ASRCTR_ATS(index));
 	regmap_update_bits(asrc->regmap, REG_ASRCTR,
-			   ASRCTR_USRi_MASK(index), 0);
+			   ASRCTR_USRi_MASK(index), ASRCTR_USR(index));
 	/* Set the input and output clock sources */
 	regmap_update_bits(asrc->regmap, REG_ASRCSR,
@@ -507,8 +507,7 @@  static int fsl_asrc_config_pair(struct fsl_asrc_pair *pair, bool use_ideal_rate)
 	/* Enable Ideal Ratio mode */
 	regmap_update_bits(asrc->regmap, REG_ASRCTR,
-			   ASRCTR_IDRi_MASK(index) | ASRCTR_USRi_MASK(index),
-			   ASRCTR_IDR(index) | ASRCTR_USR(index));
+			   ASRCTR_IDRi_MASK(index), ASRCTR_IDR(index);
 	fsl_asrc_sel_proc(inrate, outrate, &pre_proc, &post_proc);