Message ID | 20200721001606.10781-21-allison.henderson@oracle.com (mailing list archive) |
---|---|
State | Accepted |
Headers | show |
Series | xfs: Delay Ready Attributes | expand |
On Mon, Jul 20, 2020 at 05:16:01PM -0700, Allison Collins wrote: > Invert the rename logic in xfs_attr_leaf_addname to simplify the > delayed attr logic later. > > Signed-off-by: Allison Collins <allison.henderson@oracle.com> > Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> --D > --- > fs/xfs/libxfs/xfs_attr.c | 107 ++++++++++++++++++++++++----------------------- > 1 file changed, 55 insertions(+), 52 deletions(-) > > diff --git a/fs/xfs/libxfs/xfs_attr.c b/fs/xfs/libxfs/xfs_attr.c > index f993af5..ca1e851 100644 > --- a/fs/xfs/libxfs/xfs_attr.c > +++ b/fs/xfs/libxfs/xfs_attr.c > @@ -695,68 +695,71 @@ xfs_attr_leaf_addname( > return error; > } > > - /* > - * If this is an atomic rename operation, we must "flip" the > - * incomplete flags on the "new" and "old" attribute/value pairs > - * so that one disappears and one appears atomically. Then we > - * must remove the "old" attribute/value pair. > - */ > - if (args->op_flags & XFS_DA_OP_RENAME) { > + if (!(args->op_flags & XFS_DA_OP_RENAME)) { > /* > - * In a separate transaction, set the incomplete flag on the > - * "old" attr and clear the incomplete flag on the "new" attr. > - */ > - error = xfs_attr3_leaf_flipflags(args); > - if (error) > - return error; > - /* > - * Commit the flag value change and start the next trans in > - * series. > + * Added a "remote" value, just clear the incomplete flag. > */ > - error = xfs_trans_roll_inode(&args->trans, args->dp); > - if (error) > - return error; > + if (args->rmtblkno > 0) > + error = xfs_attr3_leaf_clearflag(args); > > - /* > - * Dismantle the "old" attribute/value pair by removing > - * a "remote" value (if it exists). > - */ > - xfs_attr_restore_rmt_blk(args); > + return error; > + } > > - if (args->rmtblkno) { > - error = xfs_attr_rmtval_invalidate(args); > - if (error) > - return error; > + /* > + * If this is an atomic rename operation, we must "flip" the incomplete > + * flags on the "new" and "old" attribute/value pairs so that one > + * disappears and one appears atomically. Then we must remove the "old" > + * attribute/value pair. > + * > + * In a separate transaction, set the incomplete flag on the "old" attr > + * and clear the incomplete flag on the "new" attr. > + */ > > - error = xfs_attr_rmtval_remove(args); > - if (error) > - return error; > - } > + error = xfs_attr3_leaf_flipflags(args); > + if (error) > + return error; > + /* > + * Commit the flag value change and start the next trans in series. > + */ > + error = xfs_trans_roll_inode(&args->trans, args->dp); > + if (error) > + return error; > > - /* > - * Read in the block containing the "old" attr, then > - * remove the "old" attr from that block (neat, huh!) > - */ > - error = xfs_attr3_leaf_read(args->trans, args->dp, args->blkno, > - &bp); > + /* > + * Dismantle the "old" attribute/value pair by removing a "remote" value > + * (if it exists). > + */ > + xfs_attr_restore_rmt_blk(args); > + > + if (args->rmtblkno) { > + error = xfs_attr_rmtval_invalidate(args); > if (error) > return error; > > - xfs_attr3_leaf_remove(bp, args); > - > - /* > - * If the result is small enough, shrink it all into the inode. > - */ > - forkoff = xfs_attr_shortform_allfit(bp, dp); > - if (forkoff) > - error = xfs_attr3_leaf_to_shortform(bp, args, forkoff); > - /* bp is gone due to xfs_da_shrink_inode */ > - } else if (args->rmtblkno > 0) { > - /* > - * Added a "remote" value, just clear the incomplete flag. > - */ > - error = xfs_attr3_leaf_clearflag(args); > + error = xfs_attr_rmtval_remove(args); > + if (error) > + return error; > } > + > + /* > + * Read in the block containing the "old" attr, then remove the "old" > + * attr from that block (neat, huh!) > + */ > + error = xfs_attr3_leaf_read(args->trans, args->dp, args->blkno, > + &bp); > + if (error) > + return error; > + > + xfs_attr3_leaf_remove(bp, args); > + > + /* > + * If the result is small enough, shrink it all into the inode. > + */ > + forkoff = xfs_attr_shortform_allfit(bp, dp); > + if (forkoff) > + error = xfs_attr3_leaf_to_shortform(bp, args, forkoff); > + /* bp is gone due to xfs_da_shrink_inode */ > + > return error; > } > > -- > 2.7.4 >
On 7/21/20 4:39 PM, Darrick J. Wong wrote: > On Mon, Jul 20, 2020 at 05:16:01PM -0700, Allison Collins wrote: >> Invert the rename logic in xfs_attr_leaf_addname to simplify the >> delayed attr logic later. >> >> Signed-off-by: Allison Collins <allison.henderson@oracle.com> >> Reviewed-by: Brian Foster <bfoster@redhat.com> > > Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Thanks! Allison > > --D > >> --- >> fs/xfs/libxfs/xfs_attr.c | 107 ++++++++++++++++++++++++----------------------- >> 1 file changed, 55 insertions(+), 52 deletions(-) >> >> diff --git a/fs/xfs/libxfs/xfs_attr.c b/fs/xfs/libxfs/xfs_attr.c >> index f993af5..ca1e851 100644 >> --- a/fs/xfs/libxfs/xfs_attr.c >> +++ b/fs/xfs/libxfs/xfs_attr.c >> @@ -695,68 +695,71 @@ xfs_attr_leaf_addname( >> return error; >> } >> >> - /* >> - * If this is an atomic rename operation, we must "flip" the >> - * incomplete flags on the "new" and "old" attribute/value pairs >> - * so that one disappears and one appears atomically. Then we >> - * must remove the "old" attribute/value pair. >> - */ >> - if (args->op_flags & XFS_DA_OP_RENAME) { >> + if (!(args->op_flags & XFS_DA_OP_RENAME)) { >> /* >> - * In a separate transaction, set the incomplete flag on the >> - * "old" attr and clear the incomplete flag on the "new" attr. >> - */ >> - error = xfs_attr3_leaf_flipflags(args); >> - if (error) >> - return error; >> - /* >> - * Commit the flag value change and start the next trans in >> - * series. >> + * Added a "remote" value, just clear the incomplete flag. >> */ >> - error = xfs_trans_roll_inode(&args->trans, args->dp); >> - if (error) >> - return error; >> + if (args->rmtblkno > 0) >> + error = xfs_attr3_leaf_clearflag(args); >> >> - /* >> - * Dismantle the "old" attribute/value pair by removing >> - * a "remote" value (if it exists). >> - */ >> - xfs_attr_restore_rmt_blk(args); >> + return error; >> + } >> >> - if (args->rmtblkno) { >> - error = xfs_attr_rmtval_invalidate(args); >> - if (error) >> - return error; >> + /* >> + * If this is an atomic rename operation, we must "flip" the incomplete >> + * flags on the "new" and "old" attribute/value pairs so that one >> + * disappears and one appears atomically. Then we must remove the "old" >> + * attribute/value pair. >> + * >> + * In a separate transaction, set the incomplete flag on the "old" attr >> + * and clear the incomplete flag on the "new" attr. >> + */ >> >> - error = xfs_attr_rmtval_remove(args); >> - if (error) >> - return error; >> - } >> + error = xfs_attr3_leaf_flipflags(args); >> + if (error) >> + return error; >> + /* >> + * Commit the flag value change and start the next trans in series. >> + */ >> + error = xfs_trans_roll_inode(&args->trans, args->dp); >> + if (error) >> + return error; >> >> - /* >> - * Read in the block containing the "old" attr, then >> - * remove the "old" attr from that block (neat, huh!) >> - */ >> - error = xfs_attr3_leaf_read(args->trans, args->dp, args->blkno, >> - &bp); >> + /* >> + * Dismantle the "old" attribute/value pair by removing a "remote" value >> + * (if it exists). >> + */ >> + xfs_attr_restore_rmt_blk(args); >> + >> + if (args->rmtblkno) { >> + error = xfs_attr_rmtval_invalidate(args); >> if (error) >> return error; >> >> - xfs_attr3_leaf_remove(bp, args); >> - >> - /* >> - * If the result is small enough, shrink it all into the inode. >> - */ >> - forkoff = xfs_attr_shortform_allfit(bp, dp); >> - if (forkoff) >> - error = xfs_attr3_leaf_to_shortform(bp, args, forkoff); >> - /* bp is gone due to xfs_da_shrink_inode */ >> - } else if (args->rmtblkno > 0) { >> - /* >> - * Added a "remote" value, just clear the incomplete flag. >> - */ >> - error = xfs_attr3_leaf_clearflag(args); >> + error = xfs_attr_rmtval_remove(args); >> + if (error) >> + return error; >> } >> + >> + /* >> + * Read in the block containing the "old" attr, then remove the "old" >> + * attr from that block (neat, huh!) >> + */ >> + error = xfs_attr3_leaf_read(args->trans, args->dp, args->blkno, >> + &bp); >> + if (error) >> + return error; >> + >> + xfs_attr3_leaf_remove(bp, args); >> + >> + /* >> + * If the result is small enough, shrink it all into the inode. >> + */ >> + forkoff = xfs_attr_shortform_allfit(bp, dp); >> + if (forkoff) >> + error = xfs_attr3_leaf_to_shortform(bp, args, forkoff); >> + /* bp is gone due to xfs_da_shrink_inode */ >> + >> return error; >> } >> >> -- >> 2.7.4 >>
diff --git a/fs/xfs/libxfs/xfs_attr.c b/fs/xfs/libxfs/xfs_attr.c index f993af5..ca1e851 100644 --- a/fs/xfs/libxfs/xfs_attr.c +++ b/fs/xfs/libxfs/xfs_attr.c @@ -695,68 +695,71 @@ xfs_attr_leaf_addname( return error; } - /* - * If this is an atomic rename operation, we must "flip" the - * incomplete flags on the "new" and "old" attribute/value pairs - * so that one disappears and one appears atomically. Then we - * must remove the "old" attribute/value pair. - */ - if (args->op_flags & XFS_DA_OP_RENAME) { + if (!(args->op_flags & XFS_DA_OP_RENAME)) { /* - * In a separate transaction, set the incomplete flag on the - * "old" attr and clear the incomplete flag on the "new" attr. - */ - error = xfs_attr3_leaf_flipflags(args); - if (error) - return error; - /* - * Commit the flag value change and start the next trans in - * series. + * Added a "remote" value, just clear the incomplete flag. */ - error = xfs_trans_roll_inode(&args->trans, args->dp); - if (error) - return error; + if (args->rmtblkno > 0) + error = xfs_attr3_leaf_clearflag(args); - /* - * Dismantle the "old" attribute/value pair by removing - * a "remote" value (if it exists). - */ - xfs_attr_restore_rmt_blk(args); + return error; + } - if (args->rmtblkno) { - error = xfs_attr_rmtval_invalidate(args); - if (error) - return error; + /* + * If this is an atomic rename operation, we must "flip" the incomplete + * flags on the "new" and "old" attribute/value pairs so that one + * disappears and one appears atomically. Then we must remove the "old" + * attribute/value pair. + * + * In a separate transaction, set the incomplete flag on the "old" attr + * and clear the incomplete flag on the "new" attr. + */ - error = xfs_attr_rmtval_remove(args); - if (error) - return error; - } + error = xfs_attr3_leaf_flipflags(args); + if (error) + return error; + /* + * Commit the flag value change and start the next trans in series. + */ + error = xfs_trans_roll_inode(&args->trans, args->dp); + if (error) + return error; - /* - * Read in the block containing the "old" attr, then - * remove the "old" attr from that block (neat, huh!) - */ - error = xfs_attr3_leaf_read(args->trans, args->dp, args->blkno, - &bp); + /* + * Dismantle the "old" attribute/value pair by removing a "remote" value + * (if it exists). + */ + xfs_attr_restore_rmt_blk(args); + + if (args->rmtblkno) { + error = xfs_attr_rmtval_invalidate(args); if (error) return error; - xfs_attr3_leaf_remove(bp, args); - - /* - * If the result is small enough, shrink it all into the inode. - */ - forkoff = xfs_attr_shortform_allfit(bp, dp); - if (forkoff) - error = xfs_attr3_leaf_to_shortform(bp, args, forkoff); - /* bp is gone due to xfs_da_shrink_inode */ - } else if (args->rmtblkno > 0) { - /* - * Added a "remote" value, just clear the incomplete flag. - */ - error = xfs_attr3_leaf_clearflag(args); + error = xfs_attr_rmtval_remove(args); + if (error) + return error; } + + /* + * Read in the block containing the "old" attr, then remove the "old" + * attr from that block (neat, huh!) + */ + error = xfs_attr3_leaf_read(args->trans, args->dp, args->blkno, + &bp); + if (error) + return error; + + xfs_attr3_leaf_remove(bp, args); + + /* + * If the result is small enough, shrink it all into the inode. + */ + forkoff = xfs_attr_shortform_allfit(bp, dp); + if (forkoff) + error = xfs_attr3_leaf_to_shortform(bp, args, forkoff); + /* bp is gone due to xfs_da_shrink_inode */ + return error; }