diff mbox series

[05/11] usb: mtu3: introduce a funtion to check maximum speed

Message ID 1595834101-13094-5-git-send-email-chunfeng.yun@mediatek.com (mailing list archive)
State New, archived
Headers show
Series [01/11] usb: mtu3: remove unnecessary pointer checks | expand

Commit Message

Chunfeng Yun (云春峰) July 27, 2020, 7:14 a.m. UTC 
The max_speed got from DTS may be not supported by the
hardware, so need check it, and assign a proper default
value. And make it clear by introducing a funtion.

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
---
 drivers/usb/mtu3/mtu3_core.c | 48 ++++++++++++++++++++++++++------------------
 1 file changed, 28 insertions(+), 20 deletions(-)
diff mbox series

Patch

diff --git a/drivers/usb/mtu3/mtu3_core.c b/drivers/usb/mtu3/mtu3_core.c
index ece5b3e..9694813 100644
--- a/drivers/usb/mtu3/mtu3_core.c
+++ b/drivers/usb/mtu3/mtu3_core.c
@@ -573,9 +573,6 @@  static void mtu3_set_speed(struct mtu3 *mtu)
 {
 	void __iomem *mbase = mtu->mac_base;
 
-	if (!mtu->is_u3_ip && (mtu->max_speed > USB_SPEED_HIGH))
-		mtu->max_speed = USB_SPEED_HIGH;
-
 	if (mtu->max_speed == USB_SPEED_FULL) {
 		/* disable U3 SS function */
 		mtu3_clrbits(mbase, U3D_USB3_CONFIG, USB3_EN);
@@ -761,6 +758,32 @@  static irqreturn_t mtu3_irq(int irq, void *data)
 	return IRQ_HANDLED;
 }
 
+static void mtu3_check_params(struct mtu3 *mtu)
+{
+	/* check the max_speed parameter */
+	switch (mtu->max_speed) {
+	case USB_SPEED_FULL:
+	case USB_SPEED_HIGH:
+	case USB_SPEED_SUPER:
+	case USB_SPEED_SUPER_PLUS:
+		break;
+	default:
+		dev_err(mtu->dev, "invalid max_speed: %s\n",
+			usb_speed_string(mtu->max_speed));
+		fallthrough;
+	case USB_SPEED_UNKNOWN:
+		/* default as SSP */
+		mtu->max_speed = USB_SPEED_SUPER_PLUS;
+		break;
+	}
+
+	if (!mtu->is_u3_ip && (mtu->max_speed > USB_SPEED_HIGH))
+		mtu->max_speed = USB_SPEED_HIGH;
+
+	dev_info(mtu->dev, "max_speed: %s\n",
+		 usb_speed_string(mtu->max_speed));
+}
+
 static int mtu3_hw_init(struct mtu3 *mtu)
 {
 	u32 value;
@@ -776,6 +799,8 @@  static int mtu3_hw_init(struct mtu3 *mtu)
 	dev_info(mtu->dev, "IP version 0x%x(%s IP)\n", mtu->hw_version,
 		mtu->is_u3_ip ? "U3" : "U2");
 
+	mtu3_check_params(mtu);
+
 	mtu3_device_reset(mtu);
 
 	ret = mtu3_device_enable(mtu);
@@ -857,23 +882,6 @@  int ssusb_gadget_init(struct ssusb_mtk *ssusb)
 	mtu->ssusb = ssusb;
 	mtu->max_speed = usb_get_maximum_speed(dev);
 
-	/* check the max_speed parameter */
-	switch (mtu->max_speed) {
-	case USB_SPEED_FULL:
-	case USB_SPEED_HIGH:
-	case USB_SPEED_SUPER:
-	case USB_SPEED_SUPER_PLUS:
-		break;
-	default:
-		dev_err(dev, "invalid max_speed: %s\n",
-			usb_speed_string(mtu->max_speed));
-		/* fall through */
-	case USB_SPEED_UNKNOWN:
-		/* default as SSP */
-		mtu->max_speed = USB_SPEED_SUPER_PLUS;
-		break;
-	}
-
 	dev_dbg(dev, "mac_base=0x%p, ippc_base=0x%p\n",
 		mtu->mac_base, mtu->ippc_base);