@@ -290,6 +290,28 @@ ab8500_ldo_aux8 {
};
};
};
+
+ mcde@a0350000 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&dsi_default_mode>;
+
+ dsi-controller@a0351000 {
+ panel@0 {
+ compatible = "samsung,s6e63m0";
+ reg = <0>;
+ vdd3-supply = <&panel_reg_3v0>;
+ vci-supply = <&panel_reg_1v8>;
+ reset-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>;
+ /* ESD (electrostatic discharge) detection interrupt */
+ interrupt-parent = <&gpio2>;
+ interrupts = <18 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "esd";
+ pinctrl-names = "default";
+ pinctrl-0 = <&display_default_mode>;
+ };
+ };
+ };
};
gpio-keys {
@@ -389,6 +411,40 @@ wl_reg_on: regulator-wl-reg-on {
pinctrl-names = "default";
pinctrl-0 = <&wlan_en_default>;
};
+
+ /* MIC5366 GPIO-controlled regulator */
+ panel_reg_1v8: regulator-panel-1v8 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "panel-fixed-supply";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ /* GPIO219 */
+ gpio = <&gpio6 27 GPIO_ACTIVE_HIGH>;
+
+ startup-delay-us = <200>;
+ enable-active-high;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&panel_reg_default_mode>;
+ };
+
+ /* MIC5366 GPIO-controlled regulator */
+ panel_reg_3v0: regulator-panel-3v0 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "panel-fixed-supply";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ /* GPIO219 */
+ gpio = <&gpio6 27 GPIO_ACTIVE_HIGH>;
+
+ startup-delay-us = <200>;
+ enable-active-high;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&panel_reg_default_mode>;
+ };
};
&pinctrl {
@@ -431,6 +487,41 @@ golden_cfg1 {
};
};
+ mcde {
+ dsi_default_mode: dsi_default {
+ default_mux1 {
+ /* Mux in VSI0 used for DSI TE */
+ function = "lcd";
+ groups =
+ "lcdvsi0_a_1"; /* VSI0 for LCD */
+ };
+ default_cfg1 {
+ pins =
+ "GPIO68_E1"; /* VSI0 */
+ ste,config = <&in_nopull>;
+ };
+ };
+ };
+
+ display {
+ display_default_mode: display_default {
+ golden_cfg1 {
+ pins = "GPIO139_C9"; /* MIPI_DSI0_RESET_N */
+ ste,config = <&gpio_out_lo>;
+ };
+ golden_cfg2 {
+ pins = "GPIO82_C1"; /* LDI_ESD_DET */
+ ste,config = <&gpio_in_pu>;
+ };
+ };
+ panel_reg_default_mode: panel_reg_default {
+ golden_cfg1 {
+ pins = "GPIO219_AG10"; /* LCD_PWR_EN */
+ ste,config = <&gpio_out_lo>;
+ };
+ };
+ };
+
proximity {
proximity_default: proximity_default {
golden_cfg1 {
Add the Samsung S6E63M0 video mode DSI display to the Samsung GT-S8190/Golden mobile phone. Cc: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> --- ChangeLog v1->v2: - Fix name of the GPIO regulator: MIC5336 - Set startup-delay to 200 us - Rename pin configs so they say "golden" - Add a comment for the power line config. --- .../arm/boot/dts/ste-ux500-samsung-golden.dts | 91 +++++++++++++++++++ 1 file changed, 91 insertions(+)