Message ID | 20200820182640.65842-1-chris@chris-wilson.co.uk (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Series | [i-g-t,1/4] i915/perf: 32bit printf cleanup | expand |
On 20/08/2020 20:26, Chris Wilson wrote: > Use PRI[du]64 as necessary for 32bit builds. > > Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Thanks! -Lionel > --- > tests/i915/perf.c | 8 ++++---- > tools/i915-perf/i915_perf_recorder.c | 2 +- > 2 files changed, 5 insertions(+), 5 deletions(-) > > diff --git a/tests/i915/perf.c b/tests/i915/perf.c > index 92edc9f1f..a894fd382 100644 > --- a/tests/i915/perf.c > +++ b/tests/i915/perf.c > @@ -2077,7 +2077,7 @@ test_blocking(uint64_t requested_oa_period, bool set_kernel_hrtimer, uint64_t ke > user_ns = (end_times.tms_utime - start_times.tms_utime) * tick_ns; > kernel_ns = (end_times.tms_stime - start_times.tms_stime) * tick_ns; > > - igt_debug("%d blocking reads during test with %lu Hz OA sampling (expect no more than %d)\n", > + igt_debug("%d blocking reads during test with %"PRIu64" Hz OA sampling (expect no more than %d)\n", > n, NSEC_PER_SEC / oa_period, max_iterations); > igt_debug("%d extra iterations seen, not related to periodic sampling (e.g. context switches)\n", > n_extra_iterations); > @@ -2265,7 +2265,7 @@ test_polling(uint64_t requested_oa_period, bool set_kernel_hrtimer, uint64_t ker > user_ns = (end_times.tms_utime - start_times.tms_utime) * tick_ns; > kernel_ns = (end_times.tms_stime - start_times.tms_stime) * tick_ns; > > - igt_debug("%d non-blocking reads during test with %lu Hz OA sampling (expect no more than %d)\n", > + igt_debug("%d non-blocking reads during test with %"PRIu64" Hz OA sampling (expect no more than %d)\n", > n, NSEC_PER_SEC / oa_period, max_iterations); > igt_debug("%d extra iterations seen, not related to periodic sampling (e.g. context switches)\n", > n_extra_iterations); > @@ -2357,7 +2357,7 @@ num_valid_reports_captured(struct drm_i915_perf_open_param *param, > int64_t start, end; > int num_reports = 0; > > - igt_debug("Expected duration = %lu\n", *duration_ns); > + igt_debug("Expected duration = %"PRId64"\n", *duration_ns); > > stream_fd = __perf_open(drm_fd, param, true); > > @@ -2389,7 +2389,7 @@ num_valid_reports_captured(struct drm_i915_perf_open_param *param, > > *duration_ns = end - start; > > - igt_debug("Actual duration = %lu\n", *duration_ns); > + igt_debug("Actual duration = %"PRIu64"\n", *duration_ns); > > return num_reports; > } > diff --git a/tools/i915-perf/i915_perf_recorder.c b/tools/i915-perf/i915_perf_recorder.c > index 7671f39b4..adc41c29f 100644 > --- a/tools/i915-perf/i915_perf_recorder.c > +++ b/tools/i915-perf/i915_perf_recorder.c > @@ -1001,7 +1001,7 @@ main(int argc, char *argv[]) > } > > ctx.oa_exponent = oa_exponent_for_period(ctx.timestamp_frequency, perf_period); > - fprintf(stdout, "Opening perf stream with metric_id=%lu oa_exponent=%u\n", > + fprintf(stdout, "Opening perf stream with metric_id=%"PRIu64" oa_exponent=%u\n", > ctx.metric_set->perf_oa_metrics_set, ctx.oa_exponent); > > ctx.perf_fd = perf_open(&ctx);
On Fri, Aug 21, 2020 at 12:45:23AM +0300, Lionel Landwerlin wrote: > On 20/08/2020 20:26, Chris Wilson wrote: > > Use PRI[du]64 as necessary for 32bit builds. > > > > Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> > > Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> > Was this for just 1/4 or the whole series? This one is for the whole series: Reviewed-by: Petri Latvala <petri.latvala@intel.com> > > Thanks! > > -Lionel > > > --- > > tests/i915/perf.c | 8 ++++---- > > tools/i915-perf/i915_perf_recorder.c | 2 +- > > 2 files changed, 5 insertions(+), 5 deletions(-) > > > > diff --git a/tests/i915/perf.c b/tests/i915/perf.c > > index 92edc9f1f..a894fd382 100644 > > --- a/tests/i915/perf.c > > +++ b/tests/i915/perf.c > > @@ -2077,7 +2077,7 @@ test_blocking(uint64_t requested_oa_period, bool set_kernel_hrtimer, uint64_t ke > > user_ns = (end_times.tms_utime - start_times.tms_utime) * tick_ns; > > kernel_ns = (end_times.tms_stime - start_times.tms_stime) * tick_ns; > > - igt_debug("%d blocking reads during test with %lu Hz OA sampling (expect no more than %d)\n", > > + igt_debug("%d blocking reads during test with %"PRIu64" Hz OA sampling (expect no more than %d)\n", > > n, NSEC_PER_SEC / oa_period, max_iterations); > > igt_debug("%d extra iterations seen, not related to periodic sampling (e.g. context switches)\n", > > n_extra_iterations); > > @@ -2265,7 +2265,7 @@ test_polling(uint64_t requested_oa_period, bool set_kernel_hrtimer, uint64_t ker > > user_ns = (end_times.tms_utime - start_times.tms_utime) * tick_ns; > > kernel_ns = (end_times.tms_stime - start_times.tms_stime) * tick_ns; > > - igt_debug("%d non-blocking reads during test with %lu Hz OA sampling (expect no more than %d)\n", > > + igt_debug("%d non-blocking reads during test with %"PRIu64" Hz OA sampling (expect no more than %d)\n", > > n, NSEC_PER_SEC / oa_period, max_iterations); > > igt_debug("%d extra iterations seen, not related to periodic sampling (e.g. context switches)\n", > > n_extra_iterations); > > @@ -2357,7 +2357,7 @@ num_valid_reports_captured(struct drm_i915_perf_open_param *param, > > int64_t start, end; > > int num_reports = 0; > > - igt_debug("Expected duration = %lu\n", *duration_ns); > > + igt_debug("Expected duration = %"PRId64"\n", *duration_ns); > > stream_fd = __perf_open(drm_fd, param, true); > > @@ -2389,7 +2389,7 @@ num_valid_reports_captured(struct drm_i915_perf_open_param *param, > > *duration_ns = end - start; > > - igt_debug("Actual duration = %lu\n", *duration_ns); > > + igt_debug("Actual duration = %"PRIu64"\n", *duration_ns); > > return num_reports; > > } > > diff --git a/tools/i915-perf/i915_perf_recorder.c b/tools/i915-perf/i915_perf_recorder.c > > index 7671f39b4..adc41c29f 100644 > > --- a/tools/i915-perf/i915_perf_recorder.c > > +++ b/tools/i915-perf/i915_perf_recorder.c > > @@ -1001,7 +1001,7 @@ main(int argc, char *argv[]) > > } > > ctx.oa_exponent = oa_exponent_for_period(ctx.timestamp_frequency, perf_period); > > - fprintf(stdout, "Opening perf stream with metric_id=%lu oa_exponent=%u\n", > > + fprintf(stdout, "Opening perf stream with metric_id=%"PRIu64" oa_exponent=%u\n", > > ctx.metric_set->perf_oa_metrics_set, ctx.oa_exponent); > > ctx.perf_fd = perf_open(&ctx); > > > _______________________________________________ > igt-dev mailing list > igt-dev@lists.freedesktop.org > https://lists.freedesktop.org/mailman/listinfo/igt-dev
On 21/08/2020 10:54, Petri Latvala wrote: > On Fri, Aug 21, 2020 at 12:45:23AM +0300, Lionel Landwerlin wrote: >> On 20/08/2020 20:26, Chris Wilson wrote: >>> Use PRI[du]64 as necessary for 32bit builds. >>> >>> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> >> Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> >> > Was this for just 1/4 or the whole series? Just for this patch. -Lionel > > This one is for the whole series: > Reviewed-by: Petri Latvala <petri.latvala@intel.com> > > > >> Thanks! >> >> -Lionel >> >>> --- >>> tests/i915/perf.c | 8 ++++---- >>> tools/i915-perf/i915_perf_recorder.c | 2 +- >>> 2 files changed, 5 insertions(+), 5 deletions(-) >>> >>> diff --git a/tests/i915/perf.c b/tests/i915/perf.c >>> index 92edc9f1f..a894fd382 100644 >>> --- a/tests/i915/perf.c >>> +++ b/tests/i915/perf.c >>> @@ -2077,7 +2077,7 @@ test_blocking(uint64_t requested_oa_period, bool set_kernel_hrtimer, uint64_t ke >>> user_ns = (end_times.tms_utime - start_times.tms_utime) * tick_ns; >>> kernel_ns = (end_times.tms_stime - start_times.tms_stime) * tick_ns; >>> - igt_debug("%d blocking reads during test with %lu Hz OA sampling (expect no more than %d)\n", >>> + igt_debug("%d blocking reads during test with %"PRIu64" Hz OA sampling (expect no more than %d)\n", >>> n, NSEC_PER_SEC / oa_period, max_iterations); >>> igt_debug("%d extra iterations seen, not related to periodic sampling (e.g. context switches)\n", >>> n_extra_iterations); >>> @@ -2265,7 +2265,7 @@ test_polling(uint64_t requested_oa_period, bool set_kernel_hrtimer, uint64_t ker >>> user_ns = (end_times.tms_utime - start_times.tms_utime) * tick_ns; >>> kernel_ns = (end_times.tms_stime - start_times.tms_stime) * tick_ns; >>> - igt_debug("%d non-blocking reads during test with %lu Hz OA sampling (expect no more than %d)\n", >>> + igt_debug("%d non-blocking reads during test with %"PRIu64" Hz OA sampling (expect no more than %d)\n", >>> n, NSEC_PER_SEC / oa_period, max_iterations); >>> igt_debug("%d extra iterations seen, not related to periodic sampling (e.g. context switches)\n", >>> n_extra_iterations); >>> @@ -2357,7 +2357,7 @@ num_valid_reports_captured(struct drm_i915_perf_open_param *param, >>> int64_t start, end; >>> int num_reports = 0; >>> - igt_debug("Expected duration = %lu\n", *duration_ns); >>> + igt_debug("Expected duration = %"PRId64"\n", *duration_ns); >>> stream_fd = __perf_open(drm_fd, param, true); >>> @@ -2389,7 +2389,7 @@ num_valid_reports_captured(struct drm_i915_perf_open_param *param, >>> *duration_ns = end - start; >>> - igt_debug("Actual duration = %lu\n", *duration_ns); >>> + igt_debug("Actual duration = %"PRIu64"\n", *duration_ns); >>> return num_reports; >>> } >>> diff --git a/tools/i915-perf/i915_perf_recorder.c b/tools/i915-perf/i915_perf_recorder.c >>> index 7671f39b4..adc41c29f 100644 >>> --- a/tools/i915-perf/i915_perf_recorder.c >>> +++ b/tools/i915-perf/i915_perf_recorder.c >>> @@ -1001,7 +1001,7 @@ main(int argc, char *argv[]) >>> } >>> ctx.oa_exponent = oa_exponent_for_period(ctx.timestamp_frequency, perf_period); >>> - fprintf(stdout, "Opening perf stream with metric_id=%lu oa_exponent=%u\n", >>> + fprintf(stdout, "Opening perf stream with metric_id=%"PRIu64" oa_exponent=%u\n", >>> ctx.metric_set->perf_oa_metrics_set, ctx.oa_exponent); >>> ctx.perf_fd = perf_open(&ctx); >> >> _______________________________________________ >> igt-dev mailing list >> igt-dev@lists.freedesktop.org >> https://lists.freedesktop.org/mailman/listinfo/igt-dev
diff --git a/tests/i915/perf.c b/tests/i915/perf.c index 92edc9f1f..a894fd382 100644 --- a/tests/i915/perf.c +++ b/tests/i915/perf.c @@ -2077,7 +2077,7 @@ test_blocking(uint64_t requested_oa_period, bool set_kernel_hrtimer, uint64_t ke user_ns = (end_times.tms_utime - start_times.tms_utime) * tick_ns; kernel_ns = (end_times.tms_stime - start_times.tms_stime) * tick_ns; - igt_debug("%d blocking reads during test with %lu Hz OA sampling (expect no more than %d)\n", + igt_debug("%d blocking reads during test with %"PRIu64" Hz OA sampling (expect no more than %d)\n", n, NSEC_PER_SEC / oa_period, max_iterations); igt_debug("%d extra iterations seen, not related to periodic sampling (e.g. context switches)\n", n_extra_iterations); @@ -2265,7 +2265,7 @@ test_polling(uint64_t requested_oa_period, bool set_kernel_hrtimer, uint64_t ker user_ns = (end_times.tms_utime - start_times.tms_utime) * tick_ns; kernel_ns = (end_times.tms_stime - start_times.tms_stime) * tick_ns; - igt_debug("%d non-blocking reads during test with %lu Hz OA sampling (expect no more than %d)\n", + igt_debug("%d non-blocking reads during test with %"PRIu64" Hz OA sampling (expect no more than %d)\n", n, NSEC_PER_SEC / oa_period, max_iterations); igt_debug("%d extra iterations seen, not related to periodic sampling (e.g. context switches)\n", n_extra_iterations); @@ -2357,7 +2357,7 @@ num_valid_reports_captured(struct drm_i915_perf_open_param *param, int64_t start, end; int num_reports = 0; - igt_debug("Expected duration = %lu\n", *duration_ns); + igt_debug("Expected duration = %"PRId64"\n", *duration_ns); stream_fd = __perf_open(drm_fd, param, true); @@ -2389,7 +2389,7 @@ num_valid_reports_captured(struct drm_i915_perf_open_param *param, *duration_ns = end - start; - igt_debug("Actual duration = %lu\n", *duration_ns); + igt_debug("Actual duration = %"PRIu64"\n", *duration_ns); return num_reports; } diff --git a/tools/i915-perf/i915_perf_recorder.c b/tools/i915-perf/i915_perf_recorder.c index 7671f39b4..adc41c29f 100644 --- a/tools/i915-perf/i915_perf_recorder.c +++ b/tools/i915-perf/i915_perf_recorder.c @@ -1001,7 +1001,7 @@ main(int argc, char *argv[]) } ctx.oa_exponent = oa_exponent_for_period(ctx.timestamp_frequency, perf_period); - fprintf(stdout, "Opening perf stream with metric_id=%lu oa_exponent=%u\n", + fprintf(stdout, "Opening perf stream with metric_id=%"PRIu64" oa_exponent=%u\n", ctx.metric_set->perf_oa_metrics_set, ctx.oa_exponent); ctx.perf_fd = perf_open(&ctx);
Use PRI[du]64 as necessary for 32bit builds. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> --- tests/i915/perf.c | 8 ++++---- tools/i915-perf/i915_perf_recorder.c | 2 +- 2 files changed, 5 insertions(+), 5 deletions(-)