Message ID | 20200828195808.27975-5-luca@lucaceresoli.net (mailing list archive) |
---|---|
State | Superseded, archived |
Headers | show |
Series | [v3,1/5] fpga manager: xilinx-spi: remove stray comment | expand |
On 8/28/20 12:58 PM, Luca Ceresoli wrote: > When the DONE pin does not go high after programming to confirm programming > success, the INIT_B pin provides some info on the reason. Use it if > available to provide a more explanatory error message. > > Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> This patch set looks good to me. Thanks Tom Reviewed-by: Tom Rix <trix@redhat.com>
diff --git a/drivers/fpga/xilinx-spi.c b/drivers/fpga/xilinx-spi.c index 9488c8fbaefd..c2e0a42cd4f2 100644 --- a/drivers/fpga/xilinx-spi.c +++ b/drivers/fpga/xilinx-spi.c @@ -195,7 +195,21 @@ static int xilinx_spi_write_complete(struct fpga_manager *mgr, return 0; } - dev_err(&mgr->dev, "Timeout after config data transfer\n"); + if (conf->init_b) { + ret = gpiod_get_value(conf->init_b); + + if (ret < 0) { + dev_err(&mgr->dev, "Error reading INIT_B (%d)\n", ret); + return ret; + } + + dev_err(&mgr->dev, + ret ? "CRC error or invalid device\n" + : "Missing sync word or incomplete bitstream\n"); + } else { + dev_err(&mgr->dev, "Timeout after config data transfer\n"); + } + return -ETIMEDOUT; }
When the DONE pin does not go high after programming to confirm programming success, the INIT_B pin provides some info on the reason. Use it if available to provide a more explanatory error message. Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> --- Changes in v3: none. Changes in v2: - also check for gpiod_get_value() errors (Tom Rix) --- drivers/fpga/xilinx-spi.c | 16 +++++++++++++++- 1 file changed, 15 insertions(+), 1 deletion(-)