diff mbox series

[v6,7/8] X.509: support OSCCA sm2-with-sm3 certificate verification

Message ID 20200903131242.128665-8-tianjia.zhang@linux.alibaba.com (mailing list archive)
State New, archived
Headers show
Series crpyto: introduce OSCCA certificate and SM2 asymmetric algorithm | expand

Commit Message

tianjia.zhang Sept. 3, 2020, 1:12 p.m. UTC
The digital certificate format based on SM2 crypto algorithm as
specified in GM/T 0015-2012. It was published by State Encryption
Management Bureau, China.

The method of generating Other User Information is defined as
ZA=H256(ENTLA || IDA || a || b || xG || yG || xA || yA), it also
specified in https://tools.ietf.org/html/draft-shen-sm2-ecdsa-02.

The x509 certificate supports sm2-with-sm3 type certificate
verification.  Because certificate verification requires ZA
in addition to tbs data, ZA also depends on elliptic curve
parameters and public key data, so you need to access tbs in sig
and calculate ZA. Finally calculate the digest of the
signature and complete the verification work. The calculation
process of ZA is declared in specifications GM/T 0009-2012
and GM/T 0003.2-2012.

Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Tested-by: Xufeng Zhang <yunbo.xufeng@linux.alibaba.com>
---
 crypto/asymmetric_keys/Makefile          |  1 +
 crypto/asymmetric_keys/public_key.c      |  6 +++
 crypto/asymmetric_keys/public_key_sm2.c  | 61 ++++++++++++++++++++++++
 crypto/asymmetric_keys/x509_public_key.c |  3 ++
 include/crypto/public_key.h              | 15 ++++++
 5 files changed, 86 insertions(+)
 create mode 100644 crypto/asymmetric_keys/public_key_sm2.c

Comments

Gilad Ben-Yossef Sept. 13, 2020, 7:12 a.m. UTC | #1
Hi,


On Thu, Sep 3, 2020 at 4:13 PM Tianjia Zhang
<tianjia.zhang@linux.alibaba.com> wrote:
>
> The digital certificate format based on SM2 crypto algorithm as
> specified in GM/T 0015-2012. It was published by State Encryption
> Management Bureau, China.
>
> The method of generating Other User Information is defined as
> ZA=H256(ENTLA || IDA || a || b || xG || yG || xA || yA), it also
> specified in https://tools.ietf.org/html/draft-shen-sm2-ecdsa-02.
>
> The x509 certificate supports sm2-with-sm3 type certificate
> verification.  Because certificate verification requires ZA
> in addition to tbs data, ZA also depends on elliptic curve
> parameters and public key data, so you need to access tbs in sig
> and calculate ZA. Finally calculate the digest of the
> signature and complete the verification work. The calculation
> process of ZA is declared in specifications GM/T 0009-2012
> and GM/T 0003.2-2012.
>
> Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
> Tested-by: Xufeng Zhang <yunbo.xufeng@linux.alibaba.com>
> ---
>  crypto/asymmetric_keys/Makefile          |  1 +
>  crypto/asymmetric_keys/public_key.c      |  6 +++
>  crypto/asymmetric_keys/public_key_sm2.c  | 61 ++++++++++++++++++++++++
>  crypto/asymmetric_keys/x509_public_key.c |  3 ++
>  include/crypto/public_key.h              | 15 ++++++
>  5 files changed, 86 insertions(+)
>  create mode 100644 crypto/asymmetric_keys/public_key_sm2.c
>
> diff --git a/crypto/asymmetric_keys/Makefile b/crypto/asymmetric_keys/Makefile
> index 28b91adba2ae..1a99ea5acb6b 100644
> --- a/crypto/asymmetric_keys/Makefile
> +++ b/crypto/asymmetric_keys/Makefile
> @@ -11,6 +11,7 @@ asymmetric_keys-y := \
>         signature.o
>
>  obj-$(CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE) += public_key.o
> +obj-$(CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE) += public_key_sm2.o
>  obj-$(CONFIG_ASYMMETRIC_TPM_KEY_SUBTYPE) += asym_tpm.o
>
>  #
> diff --git a/crypto/asymmetric_keys/public_key.c b/crypto/asymmetric_keys/public_key.c
> index d8410ffd7f12..1d0492098bbd 100644
> --- a/crypto/asymmetric_keys/public_key.c
> +++ b/crypto/asymmetric_keys/public_key.c
> @@ -299,6 +299,12 @@ int public_key_verify_signature(const struct public_key *pkey,
>         if (ret)
>                 goto error_free_key;
>
> +       if (strcmp(sig->pkey_algo, "sm2") == 0 && sig->data_size) {
> +               ret = cert_sig_digest_update(sig, tfm);
> +               if (ret)
> +                       goto error_free_key;
> +       }
> +
>         sg_init_table(src_sg, 2);
>         sg_set_buf(&src_sg[0], sig->s, sig->s_size);
>         sg_set_buf(&src_sg[1], sig->digest, sig->digest_size);
> diff --git a/crypto/asymmetric_keys/public_key_sm2.c b/crypto/asymmetric_keys/public_key_sm2.c
> new file mode 100644
> index 000000000000..7325cf21dbb4
> --- /dev/null
> +++ b/crypto/asymmetric_keys/public_key_sm2.c
> @@ -0,0 +1,61 @@
> +/* SPDX-License-Identifier: GPL-2.0-or-later */
> +/*
> + * asymmetric public-key algorithm for SM2-with-SM3 certificate
> + * as specified by OSCCA GM/T 0003.1-2012 -- 0003.5-2012 SM2 and
> + * described at https://tools.ietf.org/html/draft-shen-sm2-ecdsa-02
> + *
> + * Copyright (c) 2020, Alibaba Group.
> + * Authors: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
> + */
> +
> +#include <crypto/sm3_base.h>
> +#include <crypto/sm2.h>
> +#include <crypto/public_key.h>
> +
> +#if IS_REACHABLE(CONFIG_CRYPTO_SM2)
> +
> +int cert_sig_digest_update(const struct public_key_signature *sig,
> +                               struct crypto_akcipher *tfm_pkey)
> +{
> +       struct crypto_shash *tfm;
> +       struct shash_desc *desc;
> +       size_t desc_size;
> +       unsigned char dgst[SM3_DIGEST_SIZE];
> +       int ret;
> +
> +       BUG_ON(!sig->data);
> +
> +       ret = sm2_compute_z_digest(tfm_pkey, SM2_DEFAULT_USERID,
> +                                       SM2_DEFAULT_USERID_LEN, dgst);
> +       if (ret)
> +               return ret;
> +
> +       tfm = crypto_alloc_shash(sig->hash_algo, 0, 0);
> +       if (IS_ERR(tfm))
> +               return PTR_ERR(tfm);
> +
> +       desc_size = crypto_shash_descsize(tfm) + sizeof(*desc);
> +       desc = kzalloc(desc_size, GFP_KERNEL);
> +       if (!desc)
> +               goto error_free_tfm;
> +
> +       desc->tfm = tfm;
> +
> +       ret = crypto_shash_init(desc);
> +       if (ret < 0)
> +               goto error_free_desc;
> +
> +       ret = crypto_shash_update(desc, dgst, SM3_DIGEST_SIZE);
> +       if (ret < 0)
> +               goto error_free_desc;
> +
> +       ret = crypto_shash_finup(desc, sig->data, sig->data_size, sig->digest);

It looks like you are doing a separate init, update, finup every time
- I would consider using crypto_shash_digest() in one go.

In fact, considering the fact that you are allocating a tfm just for
this use and then releasing it, I would consider switching to
crypto_shash_tfm_digest() and dropping the kzalloc all together.

This should simplify the code a bit.

Other than that I don't have anything smart to say :-)

Gilad
tianjia.zhang Sept. 14, 2020, 6:34 a.m. UTC | #2
Hi Gilad,

On 9/13/20 3:12 PM, Gilad Ben-Yossef wrote:
> Hi,
> 
> 
> On Thu, Sep 3, 2020 at 4:13 PM Tianjia Zhang
> <tianjia.zhang@linux.alibaba.com> wrote:
>>
>> The digital certificate format based on SM2 crypto algorithm as
>> specified in GM/T 0015-2012. It was published by State Encryption
>> Management Bureau, China.
>>
>> The method of generating Other User Information is defined as
>> ZA=H256(ENTLA || IDA || a || b || xG || yG || xA || yA), it also
>> specified in https://tools.ietf.org/html/draft-shen-sm2-ecdsa-02.
>>
>> The x509 certificate supports sm2-with-sm3 type certificate
>> verification.  Because certificate verification requires ZA
>> in addition to tbs data, ZA also depends on elliptic curve
>> parameters and public key data, so you need to access tbs in sig
>> and calculate ZA. Finally calculate the digest of the
>> signature and complete the verification work. The calculation
>> process of ZA is declared in specifications GM/T 0009-2012
>> and GM/T 0003.2-2012.
>>
>> Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
>> Tested-by: Xufeng Zhang <yunbo.xufeng@linux.alibaba.com>
>> ---
>>   crypto/asymmetric_keys/Makefile          |  1 +
>>   crypto/asymmetric_keys/public_key.c      |  6 +++
>>   crypto/asymmetric_keys/public_key_sm2.c  | 61 ++++++++++++++++++++++++
>>   crypto/asymmetric_keys/x509_public_key.c |  3 ++
>>   include/crypto/public_key.h              | 15 ++++++
>>   5 files changed, 86 insertions(+)
>>   create mode 100644 crypto/asymmetric_keys/public_key_sm2.c
>>
>> diff --git a/crypto/asymmetric_keys/Makefile b/crypto/asymmetric_keys/Makefile
>> index 28b91adba2ae..1a99ea5acb6b 100644
>> --- a/crypto/asymmetric_keys/Makefile
>> +++ b/crypto/asymmetric_keys/Makefile
>> @@ -11,6 +11,7 @@ asymmetric_keys-y := \
>>          signature.o
>>
>>   obj-$(CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE) += public_key.o
>> +obj-$(CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE) += public_key_sm2.o
>>   obj-$(CONFIG_ASYMMETRIC_TPM_KEY_SUBTYPE) += asym_tpm.o
>>
>>   #
>> diff --git a/crypto/asymmetric_keys/public_key.c b/crypto/asymmetric_keys/public_key.c
>> index d8410ffd7f12..1d0492098bbd 100644
>> --- a/crypto/asymmetric_keys/public_key.c
>> +++ b/crypto/asymmetric_keys/public_key.c
>> @@ -299,6 +299,12 @@ int public_key_verify_signature(const struct public_key *pkey,
>>          if (ret)
>>                  goto error_free_key;
>>
>> +       if (strcmp(sig->pkey_algo, "sm2") == 0 && sig->data_size) {
>> +               ret = cert_sig_digest_update(sig, tfm);
>> +               if (ret)
>> +                       goto error_free_key;
>> +       }
>> +
>>          sg_init_table(src_sg, 2);
>>          sg_set_buf(&src_sg[0], sig->s, sig->s_size);
>>          sg_set_buf(&src_sg[1], sig->digest, sig->digest_size);
>> diff --git a/crypto/asymmetric_keys/public_key_sm2.c b/crypto/asymmetric_keys/public_key_sm2.c
>> new file mode 100644
>> index 000000000000..7325cf21dbb4
>> --- /dev/null
>> +++ b/crypto/asymmetric_keys/public_key_sm2.c
>> @@ -0,0 +1,61 @@
>> +/* SPDX-License-Identifier: GPL-2.0-or-later */
>> +/*
>> + * asymmetric public-key algorithm for SM2-with-SM3 certificate
>> + * as specified by OSCCA GM/T 0003.1-2012 -- 0003.5-2012 SM2 and
>> + * described at https://tools.ietf.org/html/draft-shen-sm2-ecdsa-02
>> + *
>> + * Copyright (c) 2020, Alibaba Group.
>> + * Authors: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
>> + */
>> +
>> +#include <crypto/sm3_base.h>
>> +#include <crypto/sm2.h>
>> +#include <crypto/public_key.h>
>> +
>> +#if IS_REACHABLE(CONFIG_CRYPTO_SM2)
>> +
>> +int cert_sig_digest_update(const struct public_key_signature *sig,
>> +                               struct crypto_akcipher *tfm_pkey)
>> +{
>> +       struct crypto_shash *tfm;
>> +       struct shash_desc *desc;
>> +       size_t desc_size;
>> +       unsigned char dgst[SM3_DIGEST_SIZE];
>> +       int ret;
>> +
>> +       BUG_ON(!sig->data);
>> +
>> +       ret = sm2_compute_z_digest(tfm_pkey, SM2_DEFAULT_USERID,
>> +                                       SM2_DEFAULT_USERID_LEN, dgst);
>> +       if (ret)
>> +               return ret;
>> +
>> +       tfm = crypto_alloc_shash(sig->hash_algo, 0, 0);
>> +       if (IS_ERR(tfm))
>> +               return PTR_ERR(tfm);
>> +
>> +       desc_size = crypto_shash_descsize(tfm) + sizeof(*desc);
>> +       desc = kzalloc(desc_size, GFP_KERNEL);
>> +       if (!desc)
>> +               goto error_free_tfm;
>> +
>> +       desc->tfm = tfm;
>> +
>> +       ret = crypto_shash_init(desc);
>> +       if (ret < 0)
>> +               goto error_free_desc;
>> +
>> +       ret = crypto_shash_update(desc, dgst, SM3_DIGEST_SIZE);
>> +       if (ret < 0)
>> +               goto error_free_desc;
>> +
>> +       ret = crypto_shash_finup(desc, sig->data, sig->data_size, sig->digest);
> 
> It looks like you are doing a separate init, update, finup every time
> - I would consider using crypto_shash_digest() in one go.
> 
> In fact, considering the fact that you are allocating a tfm just for
> this use and then releasing it, I would consider switching to
> crypto_shash_tfm_digest() and dropping the kzalloc all together.
> 
> This should simplify the code a bit.
> 
> Other than that I don't have anything smart to say :-)
> 
> Gilad
> 

The hash calculation here includes two parts of data, 'dgst' and 
'sig->data'. The last call is 'finup()' not 'final()'. I understand that 
it should not be possible to use 'crypto_shash_tfm_digest()' This kind 
of function is simplified.

If a new scope is added, the assignment of desc can be optimized, as 
follows:
```
do {
     SHASH_DESC_ON_STACK(desc, tfm);
     desc->tfm = tfm;

     /* ... */
} while (0);
```
However, the kernel code may not accept this style. What is your opinion?

Thanks,
Tianjia
Gilad Ben-Yossef Sept. 16, 2020, 8:01 a.m. UTC | #3
On Mon, Sep 14, 2020 at 9:34 AM Tianjia Zhang
<tianjia.zhang@linux.alibaba.com> wrote:
>
> Hi Gilad,
>
> On 9/13/20 3:12 PM, Gilad Ben-Yossef wrote:
> > Hi,
> >
> >
> > On Thu, Sep 3, 2020 at 4:13 PM Tianjia Zhang
> > <tianjia.zhang@linux.alibaba.com> wrote:
> >>
> >> The digital certificate format based on SM2 crypto algorithm as
> >> specified in GM/T 0015-2012. It was published by State Encryption
> >> Management Bureau, China.
> >>
> >> The method of generating Other User Information is defined as
> >> ZA=H256(ENTLA || IDA || a || b || xG || yG || xA || yA), it also
> >> specified in https://tools.ietf.org/html/draft-shen-sm2-ecdsa-02.
> >>
> >> The x509 certificate supports sm2-with-sm3 type certificate
> >> verification.  Because certificate verification requires ZA
> >> in addition to tbs data, ZA also depends on elliptic curve
> >> parameters and public key data, so you need to access tbs in sig
> >> and calculate ZA. Finally calculate the digest of the
> >> signature and complete the verification work. The calculation
> >> process of ZA is declared in specifications GM/T 0009-2012
> >> and GM/T 0003.2-2012.
> >>
> >> Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
> >> Tested-by: Xufeng Zhang <yunbo.xufeng@linux.alibaba.com>
> >> ---
> >>   crypto/asymmetric_keys/Makefile          |  1 +
> >>   crypto/asymmetric_keys/public_key.c      |  6 +++
> >>   crypto/asymmetric_keys/public_key_sm2.c  | 61 ++++++++++++++++++++++++
> >>   crypto/asymmetric_keys/x509_public_key.c |  3 ++
> >>   include/crypto/public_key.h              | 15 ++++++
> >>   5 files changed, 86 insertions(+)
> >>   create mode 100644 crypto/asymmetric_keys/public_key_sm2.c
> >>
> >> diff --git a/crypto/asymmetric_keys/Makefile b/crypto/asymmetric_keys/Makefile
> >> index 28b91adba2ae..1a99ea5acb6b 100644
> >> --- a/crypto/asymmetric_keys/Makefile
> >> +++ b/crypto/asymmetric_keys/Makefile
> >> @@ -11,6 +11,7 @@ asymmetric_keys-y := \
> >>          signature.o
> >>
> >>   obj-$(CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE) += public_key.o
> >> +obj-$(CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE) += public_key_sm2.o
> >>   obj-$(CONFIG_ASYMMETRIC_TPM_KEY_SUBTYPE) += asym_tpm.o
> >>
> >>   #
> >> diff --git a/crypto/asymmetric_keys/public_key.c b/crypto/asymmetric_keys/public_key.c
> >> index d8410ffd7f12..1d0492098bbd 100644
> >> --- a/crypto/asymmetric_keys/public_key.c
> >> +++ b/crypto/asymmetric_keys/public_key.c
> >> @@ -299,6 +299,12 @@ int public_key_verify_signature(const struct public_key *pkey,
> >>          if (ret)
> >>                  goto error_free_key;
> >>
> >> +       if (strcmp(sig->pkey_algo, "sm2") == 0 && sig->data_size) {
> >> +               ret = cert_sig_digest_update(sig, tfm);
> >> +               if (ret)
> >> +                       goto error_free_key;
> >> +       }
> >> +
> >>          sg_init_table(src_sg, 2);
> >>          sg_set_buf(&src_sg[0], sig->s, sig->s_size);
> >>          sg_set_buf(&src_sg[1], sig->digest, sig->digest_size);
> >> diff --git a/crypto/asymmetric_keys/public_key_sm2.c b/crypto/asymmetric_keys/public_key_sm2.c
> >> new file mode 100644
> >> index 000000000000..7325cf21dbb4
> >> --- /dev/null
> >> +++ b/crypto/asymmetric_keys/public_key_sm2.c
> >> @@ -0,0 +1,61 @@
> >> +/* SPDX-License-Identifier: GPL-2.0-or-later */
> >> +/*
> >> + * asymmetric public-key algorithm for SM2-with-SM3 certificate
> >> + * as specified by OSCCA GM/T 0003.1-2012 -- 0003.5-2012 SM2 and
> >> + * described at https://tools.ietf.org/html/draft-shen-sm2-ecdsa-02
> >> + *
> >> + * Copyright (c) 2020, Alibaba Group.
> >> + * Authors: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
> >> + */
> >> +
> >> +#include <crypto/sm3_base.h>
> >> +#include <crypto/sm2.h>
> >> +#include <crypto/public_key.h>
> >> +
> >> +#if IS_REACHABLE(CONFIG_CRYPTO_SM2)
> >> +
> >> +int cert_sig_digest_update(const struct public_key_signature *sig,
> >> +                               struct crypto_akcipher *tfm_pkey)
> >> +{
> >> +       struct crypto_shash *tfm;
> >> +       struct shash_desc *desc;
> >> +       size_t desc_size;
> >> +       unsigned char dgst[SM3_DIGEST_SIZE];
> >> +       int ret;
> >> +
> >> +       BUG_ON(!sig->data);
> >> +
> >> +       ret = sm2_compute_z_digest(tfm_pkey, SM2_DEFAULT_USERID,
> >> +                                       SM2_DEFAULT_USERID_LEN, dgst);
> >> +       if (ret)
> >> +               return ret;
> >> +
> >> +       tfm = crypto_alloc_shash(sig->hash_algo, 0, 0);
> >> +       if (IS_ERR(tfm))
> >> +               return PTR_ERR(tfm);
> >> +
> >> +       desc_size = crypto_shash_descsize(tfm) + sizeof(*desc);
> >> +       desc = kzalloc(desc_size, GFP_KERNEL);
> >> +       if (!desc)
> >> +               goto error_free_tfm;
> >> +
> >> +       desc->tfm = tfm;
> >> +
> >> +       ret = crypto_shash_init(desc);
> >> +       if (ret < 0)
> >> +               goto error_free_desc;
> >> +
> >> +       ret = crypto_shash_update(desc, dgst, SM3_DIGEST_SIZE);
> >> +       if (ret < 0)
> >> +               goto error_free_desc;
> >> +
> >> +       ret = crypto_shash_finup(desc, sig->data, sig->data_size, sig->digest);
> >
> > It looks like you are doing a separate init, update, finup every time
> > - I would consider using crypto_shash_digest() in one go.
> >
> > In fact, considering the fact that you are allocating a tfm just for
> > this use and then releasing it, I would consider switching to
> > crypto_shash_tfm_digest() and dropping the kzalloc all together.
> >
> > This should simplify the code a bit.
> >
> > Other than that I don't have anything smart to say :-)
> >
> > Gilad
> >
>
> The hash calculation here includes two parts of data, 'dgst' and
> 'sig->data'. The last call is 'finup()' not 'final()'. I understand that
> it should not be possible to use 'crypto_shash_tfm_digest()' This kind
> of function is simplified.
>
> If a new scope is added, the assignment of desc can be optimized, as
> follows:
> ```
> do {
>      SHASH_DESC_ON_STACK(desc, tfm);
>      desc->tfm = tfm;
>
>      /* ... */
> } while (0);
> ```
> However, the kernel code may not accept this style. What is your opinion?

No, you are right. I've indeed missed that it's a finup() and not a
final(). If the size of data was big enough it might have been worth
going to the async. hash interface and creating a scatter list for
this but I suspect it is not justified with the data sizes we are
dealing with there.

So:

Reviewed-by: Gilad Ben-Yossef <gilad@benyossef.com>

Thanks,
Gilad
diff mbox series

Patch

diff --git a/crypto/asymmetric_keys/Makefile b/crypto/asymmetric_keys/Makefile
index 28b91adba2ae..1a99ea5acb6b 100644
--- a/crypto/asymmetric_keys/Makefile
+++ b/crypto/asymmetric_keys/Makefile
@@ -11,6 +11,7 @@  asymmetric_keys-y := \
 	signature.o
 
 obj-$(CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE) += public_key.o
+obj-$(CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE) += public_key_sm2.o
 obj-$(CONFIG_ASYMMETRIC_TPM_KEY_SUBTYPE) += asym_tpm.o
 
 #
diff --git a/crypto/asymmetric_keys/public_key.c b/crypto/asymmetric_keys/public_key.c
index d8410ffd7f12..1d0492098bbd 100644
--- a/crypto/asymmetric_keys/public_key.c
+++ b/crypto/asymmetric_keys/public_key.c
@@ -299,6 +299,12 @@  int public_key_verify_signature(const struct public_key *pkey,
 	if (ret)
 		goto error_free_key;
 
+	if (strcmp(sig->pkey_algo, "sm2") == 0 && sig->data_size) {
+		ret = cert_sig_digest_update(sig, tfm);
+		if (ret)
+			goto error_free_key;
+	}
+
 	sg_init_table(src_sg, 2);
 	sg_set_buf(&src_sg[0], sig->s, sig->s_size);
 	sg_set_buf(&src_sg[1], sig->digest, sig->digest_size);
diff --git a/crypto/asymmetric_keys/public_key_sm2.c b/crypto/asymmetric_keys/public_key_sm2.c
new file mode 100644
index 000000000000..7325cf21dbb4
--- /dev/null
+++ b/crypto/asymmetric_keys/public_key_sm2.c
@@ -0,0 +1,61 @@ 
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * asymmetric public-key algorithm for SM2-with-SM3 certificate
+ * as specified by OSCCA GM/T 0003.1-2012 -- 0003.5-2012 SM2 and
+ * described at https://tools.ietf.org/html/draft-shen-sm2-ecdsa-02
+ *
+ * Copyright (c) 2020, Alibaba Group.
+ * Authors: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
+ */
+
+#include <crypto/sm3_base.h>
+#include <crypto/sm2.h>
+#include <crypto/public_key.h>
+
+#if IS_REACHABLE(CONFIG_CRYPTO_SM2)
+
+int cert_sig_digest_update(const struct public_key_signature *sig,
+				struct crypto_akcipher *tfm_pkey)
+{
+	struct crypto_shash *tfm;
+	struct shash_desc *desc;
+	size_t desc_size;
+	unsigned char dgst[SM3_DIGEST_SIZE];
+	int ret;
+
+	BUG_ON(!sig->data);
+
+	ret = sm2_compute_z_digest(tfm_pkey, SM2_DEFAULT_USERID,
+					SM2_DEFAULT_USERID_LEN, dgst);
+	if (ret)
+		return ret;
+
+	tfm = crypto_alloc_shash(sig->hash_algo, 0, 0);
+	if (IS_ERR(tfm))
+		return PTR_ERR(tfm);
+
+	desc_size = crypto_shash_descsize(tfm) + sizeof(*desc);
+	desc = kzalloc(desc_size, GFP_KERNEL);
+	if (!desc)
+		goto error_free_tfm;
+
+	desc->tfm = tfm;
+
+	ret = crypto_shash_init(desc);
+	if (ret < 0)
+		goto error_free_desc;
+
+	ret = crypto_shash_update(desc, dgst, SM3_DIGEST_SIZE);
+	if (ret < 0)
+		goto error_free_desc;
+
+	ret = crypto_shash_finup(desc, sig->data, sig->data_size, sig->digest);
+
+error_free_desc:
+	kfree(desc);
+error_free_tfm:
+	crypto_free_shash(tfm);
+	return ret;
+}
+
+#endif /* ! IS_REACHABLE(CONFIG_CRYPTO_SM2) */
diff --git a/crypto/asymmetric_keys/x509_public_key.c b/crypto/asymmetric_keys/x509_public_key.c
index d964cc82b69c..ae450eb8be14 100644
--- a/crypto/asymmetric_keys/x509_public_key.c
+++ b/crypto/asymmetric_keys/x509_public_key.c
@@ -30,6 +30,9 @@  int x509_get_sig_params(struct x509_certificate *cert)
 
 	pr_devel("==>%s()\n", __func__);
 
+	sig->data = cert->tbs;
+	sig->data_size = cert->tbs_size;
+
 	if (!cert->pub->pkey_algo)
 		cert->unsupported_key = true;
 
diff --git a/include/crypto/public_key.h b/include/crypto/public_key.h
index 11f535cfb810..02a6dbe5c366 100644
--- a/include/crypto/public_key.h
+++ b/include/crypto/public_key.h
@@ -12,6 +12,7 @@ 
 
 #include <linux/keyctl.h>
 #include <linux/oid_registry.h>
+#include <crypto/akcipher.h>
 
 /*
  * Cryptographic data for the public-key subtype of the asymmetric key type.
@@ -44,6 +45,8 @@  struct public_key_signature {
 	const char *pkey_algo;
 	const char *hash_algo;
 	const char *encoding;
+	const void *data;
+	unsigned int data_size;
 };
 
 extern void public_key_signature_free(struct public_key_signature *sig);
@@ -81,4 +84,16 @@  extern int verify_signature(const struct key *,
 int public_key_verify_signature(const struct public_key *pkey,
 				const struct public_key_signature *sig);
 
+#if IS_REACHABLE(CONFIG_CRYPTO_SM2)
+int cert_sig_digest_update(const struct public_key_signature *sig,
+				struct crypto_akcipher *tfm_pkey);
+#else
+static inline
+int cert_sig_digest_update(const struct public_key_signature *sig,
+				struct crypto_akcipher *tfm_pkey)
+{
+	return -ENOTSUPP;
+}
+#endif
+
 #endif /* _LINUX_PUBLIC_KEY_H */