| Message ID | 20200909175946.395313-18-jic23@kernel.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | dt-bindings:iio:adc: Another set of yaml conversions. | expand |
On Wed, Sep 09, 2020 at 06:59:43PM +0100, Jonathan Cameron wrote: > From: Jonathan Cameron <Jonathan.Cameron@huawei.com> > > Very simple binding. I've changed the example to use the node > name threshold-detector@0 as sensor@0 seemed too generic. > > Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> > Cc: Vladimir Barinov <vladimir.barinov@cogentembedded.com> > --- > .../devicetree/bindings/iio/adc/hi8435.txt | 21 -------- > .../bindings/iio/adc/holt,hi8435.yaml | 49 +++++++++++++++++++ > 2 files changed, 49 insertions(+), 21 deletions(-) > > diff --git a/Documentation/devicetree/bindings/iio/adc/hi8435.txt b/Documentation/devicetree/bindings/iio/adc/hi8435.txt > deleted file mode 100644 > index 3b0348c5e516..000000000000 > --- a/Documentation/devicetree/bindings/iio/adc/hi8435.txt > +++ /dev/null > @@ -1,21 +0,0 @@ > -Holt Integrated Circuits HI-8435 threshold detector bindings > - > -Required properties: > - - compatible: should be "holt,hi8435" > - - reg: spi chip select number for the device > - > -Recommended properties: > - - spi-max-frequency: definition as per > - Documentation/devicetree/bindings/spi/spi-bus.txt > - > -Optional properties: > - - gpios: GPIO used for controlling the reset pin > - > -Example: > -sensor@0 { > - compatible = "holt,hi8435"; > - reg = <0>; > - gpios = <&gpio6 1 0>; > - > - spi-max-frequency = <1000000>; > -}; > diff --git a/Documentation/devicetree/bindings/iio/adc/holt,hi8435.yaml b/Documentation/devicetree/bindings/iio/adc/holt,hi8435.yaml > new file mode 100644 > index 000000000000..a35cf3876b86 > --- /dev/null > +++ b/Documentation/devicetree/bindings/iio/adc/holt,hi8435.yaml > @@ -0,0 +1,49 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/iio/adc/holt,hi8435.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Holt Integrated Circuits HI-8435 SPI threshold detector > + > +maintainers: > + - Vladimir Barinov <vladimir.barinov@cogentembedded.com> > + > +description: | > + Datasheet: http://www.holtic.com/documents/427-hi-8435_v-rev-lpdf.do > + > +properties: > + compatible: > + const: holt,hi8435 > + > + reg: > + maxItems: 1 > + > + gpios: > + description: > + GPIO used for controlling the reset pin maxItems: 1 With that, Reviewed-by: Rob Herring <robh@kernel.org> > + > + spi-max-frequency: true > + > + "#io-channel-cells": > + const: 1 > + > +required: > + - compatible > + - reg > + > +additionalProperties: false > + > +examples: > + - | > + spi { > + #address-cells = <1>; > + #size-cells = <0>; > + threshold-detector@0 { > + compatible = "holt,hi8435"; > + reg = <0>; > + gpios = <&gpio6 1 0>; > + spi-max-frequency = <1000000>; > + }; > + }; > +... > -- > 2.28.0 >
On Tue, 15 Sep 2020 13:17:59 -0600 Rob Herring <robh@kernel.org> wrote: > On Wed, Sep 09, 2020 at 06:59:43PM +0100, Jonathan Cameron wrote: > > From: Jonathan Cameron <Jonathan.Cameron@huawei.com> > > > > Very simple binding. I've changed the example to use the node > > name threshold-detector@0 as sensor@0 seemed too generic. > > > > Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> > > Cc: Vladimir Barinov <vladimir.barinov@cogentembedded.com> > > --- > > .../devicetree/bindings/iio/adc/hi8435.txt | 21 -------- > > .../bindings/iio/adc/holt,hi8435.yaml | 49 +++++++++++++++++++ > > 2 files changed, 49 insertions(+), 21 deletions(-) > > > > diff --git a/Documentation/devicetree/bindings/iio/adc/hi8435.txt b/Documentation/devicetree/bindings/iio/adc/hi8435.txt > > deleted file mode 100644 > > index 3b0348c5e516..000000000000 > > --- a/Documentation/devicetree/bindings/iio/adc/hi8435.txt > > +++ /dev/null > > @@ -1,21 +0,0 @@ > > -Holt Integrated Circuits HI-8435 threshold detector bindings > > - > > -Required properties: > > - - compatible: should be "holt,hi8435" > > - - reg: spi chip select number for the device > > - > > -Recommended properties: > > - - spi-max-frequency: definition as per > > - Documentation/devicetree/bindings/spi/spi-bus.txt > > - > > -Optional properties: > > - - gpios: GPIO used for controlling the reset pin > > - > > -Example: > > -sensor@0 { > > - compatible = "holt,hi8435"; > > - reg = <0>; > > - gpios = <&gpio6 1 0>; > > - > > - spi-max-frequency = <1000000>; > > -}; > > diff --git a/Documentation/devicetree/bindings/iio/adc/holt,hi8435.yaml b/Documentation/devicetree/bindings/iio/adc/holt,hi8435.yaml > > new file mode 100644 > > index 000000000000..a35cf3876b86 > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/iio/adc/holt,hi8435.yaml > > @@ -0,0 +1,49 @@ > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > > +%YAML 1.2 > > +--- > > +$id: http://devicetree.org/schemas/iio/adc/holt,hi8435.yaml# > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > + > > +title: Holt Integrated Circuits HI-8435 SPI threshold detector > > + > > +maintainers: > > + - Vladimir Barinov <vladimir.barinov@cogentembedded.com> > > + > > +description: | > > + Datasheet: http://www.holtic.com/documents/427-hi-8435_v-rev-lpdf.do > > + > > +properties: > > + compatible: > > + const: holt,hi8435 > > + > > + reg: > > + maxItems: 1 > > + > > + gpios: > > + description: > > + GPIO used for controlling the reset pin > > maxItems: 1 done > > With that, > > Reviewed-by: Rob Herring <robh@kernel.org> Applied. Thanks, Jonathan > > > + > > + spi-max-frequency: true > > + > > + "#io-channel-cells": > > + const: 1 > > + > > +required: > > + - compatible > > + - reg > > + > > +additionalProperties: false > > + > > +examples: > > + - | > > + spi { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + threshold-detector@0 { > > + compatible = "holt,hi8435"; > > + reg = <0>; > > + gpios = <&gpio6 1 0>; > > + spi-max-frequency = <1000000>; > > + }; > > + }; > > +... > > -- > > 2.28.0 > >
diff --git a/Documentation/devicetree/bindings/iio/adc/hi8435.txt b/Documentation/devicetree/bindings/iio/adc/hi8435.txt deleted file mode 100644 index 3b0348c5e516..000000000000 --- a/Documentation/devicetree/bindings/iio/adc/hi8435.txt +++ /dev/null @@ -1,21 +0,0 @@ -Holt Integrated Circuits HI-8435 threshold detector bindings - -Required properties: - - compatible: should be "holt,hi8435" - - reg: spi chip select number for the device - -Recommended properties: - - spi-max-frequency: definition as per - Documentation/devicetree/bindings/spi/spi-bus.txt - -Optional properties: - - gpios: GPIO used for controlling the reset pin - -Example: -sensor@0 { - compatible = "holt,hi8435"; - reg = <0>; - gpios = <&gpio6 1 0>; - - spi-max-frequency = <1000000>; -}; diff --git a/Documentation/devicetree/bindings/iio/adc/holt,hi8435.yaml b/Documentation/devicetree/bindings/iio/adc/holt,hi8435.yaml new file mode 100644 index 000000000000..a35cf3876b86 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/holt,hi8435.yaml @@ -0,0 +1,49 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/holt,hi8435.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Holt Integrated Circuits HI-8435 SPI threshold detector + +maintainers: + - Vladimir Barinov <vladimir.barinov@cogentembedded.com> + +description: | + Datasheet: http://www.holtic.com/documents/427-hi-8435_v-rev-lpdf.do + +properties: + compatible: + const: holt,hi8435 + + reg: + maxItems: 1 + + gpios: + description: + GPIO used for controlling the reset pin + + spi-max-frequency: true + + "#io-channel-cells": + const: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + threshold-detector@0 { + compatible = "holt,hi8435"; + reg = <0>; + gpios = <&gpio6 1 0>; + spi-max-frequency = <1000000>; + }; + }; +...