diff mbox series

[V11,1/4] drm/i915/dsi: Add details about TE in get_config

Message ID 20200916053318.14270-2-vandita.kulkarni@intel.com (mailing list archive)
State New, archived
Headers show
Series Add support for mipi dsi cmd mode | expand

Commit Message

Kulkarni, Vandita Sept. 16, 2020, 5:33 a.m. UTC 
We need details about enabling TE on which port
before we enable TE through vblank enable path.
This is based on the configuration that we receive
from the VBT wrt ports, dual_link.

Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
---
 drivers/gpu/drm/i915/display/icl_dsi.c | 30 +++++++++++++++-----------
 1 file changed, 18 insertions(+), 12 deletions(-)
diff mbox series

Patch

diff --git a/drivers/gpu/drm/i915/display/icl_dsi.c b/drivers/gpu/drm/i915/display/icl_dsi.c
index 520715b7d5b5..2789020e20db 100644
--- a/drivers/gpu/drm/i915/display/icl_dsi.c
+++ b/drivers/gpu/drm/i915/display/icl_dsi.c
@@ -1447,6 +1447,18 @@  static bool gen11_dsi_is_periodic_cmd_mode(struct intel_dsi *intel_dsi)
 	return (val & DSI_PERIODIC_FRAME_UPDATE_ENABLE);
 }
 
+static void gen11_dsi_get_cmd_mode_config(struct intel_dsi *intel_dsi,
+					  struct intel_crtc_state *pipe_config)
+{
+	if (intel_dsi->ports == (BIT(PORT_B) | BIT(PORT_A)))
+		pipe_config->mode_flags |= I915_MODE_FLAG_DSI_USE_TE1 |
+					    I915_MODE_FLAG_DSI_USE_TE0;
+	else if (intel_dsi->ports == BIT(PORT_B))
+		pipe_config->mode_flags |= I915_MODE_FLAG_DSI_USE_TE1;
+	else
+		pipe_config->mode_flags |= I915_MODE_FLAG_DSI_USE_TE0;
+}
+
 static void gen11_dsi_get_config(struct intel_encoder *encoder,
 				 struct intel_crtc_state *pipe_config)
 {
@@ -1468,6 +1480,10 @@  static void gen11_dsi_get_config(struct intel_encoder *encoder,
 	pipe_config->output_types |= BIT(INTEL_OUTPUT_DSI);
 	pipe_config->pipe_bpp = bdw_get_pipemisc_bpp(crtc);
 
+	/* Get the details on which TE should be enabled */
+	if (is_cmd_mode(intel_dsi))
+		gen11_dsi_get_cmd_mode_config(intel_dsi, pipe_config);
+
 	if (gen11_dsi_is_periodic_cmd_mode(intel_dsi))
 		pipe_config->mode_flags |= I915_MODE_FLAG_DSI_PERIODIC_CMD_MODE;
 }
@@ -1562,18 +1578,8 @@  static int gen11_dsi_compute_config(struct intel_encoder *encoder,
 	 * receive TE from the slave if
 	 * dual link is enabled
 	 */
-	if (is_cmd_mode(intel_dsi)) {
-		if (intel_dsi->ports == (BIT(PORT_B) | BIT(PORT_A)))
-			pipe_config->mode_flags |=
-						I915_MODE_FLAG_DSI_USE_TE1 |
-						I915_MODE_FLAG_DSI_USE_TE0;
-		else if (intel_dsi->ports == BIT(PORT_B))
-			pipe_config->mode_flags |=
-						I915_MODE_FLAG_DSI_USE_TE1;
-		else
-			pipe_config->mode_flags |=
-						I915_MODE_FLAG_DSI_USE_TE0;
-	}
+	if (is_cmd_mode(intel_dsi))
+		gen11_dsi_get_cmd_mode_config(intel_dsi, pipe_config);
 
 	return 0;
 }