diff mbox series

[v3,09/15] ARM: dts: am335x: t335: align GPIO hog names with dtschema

Message ID 20200916155715.21009-10-krzk@kernel.org (mailing list archive)
State New, archived
Headers show
Series ARM: dts: / gpio: Add dtschema for NXP PCA953x and correct dts | expand

Commit Message

Krzysztof Kozlowski Sept. 16, 2020, 3:57 p.m. UTC
The convention for node names is to use hyphens, not underscores.
dtschema for pca95xx expects GPIO hogs to end with 'hog' prefix.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
 arch/arm/boot/dts/am335x-sbc-t335.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

Comments

Tony Lindgren Sept. 25, 2020, 11:37 a.m. UTC | #1
* Krzysztof Kozlowski <krzk@kernel.org> [200916 18:58]:
> The convention for node names is to use hyphens, not underscores.
> dtschema for pca95xx expects GPIO hogs to end with 'hog' prefix.

I'm picking up this too into omap-for-v5.10/dt thanks.

Tony
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/am335x-sbc-t335.dts b/arch/arm/boot/dts/am335x-sbc-t335.dts
index a3f6bc4072d9..81e4453687ba 100644
--- a/arch/arm/boot/dts/am335x-sbc-t335.dts
+++ b/arch/arm/boot/dts/am335x-sbc-t335.dts
@@ -155,13 +155,13 @@ 
 		gpio-controller;
 		#gpio-cells = <2>;
 		reg = <0x26>;
-		dvi_ena {
+		dvi-ena-hog {
 			gpio-hog;
 			gpios = <13 GPIO_ACTIVE_HIGH>;
 			output-high;
 			line-name = "dvi-enable";
 		};
-		lcd_ena {
+		lcd-ena-hog {
 			gpio-hog;
 			gpios = <11 GPIO_ACTIVE_HIGH>;
 			output-high;