diff mbox series

pwm: rockchip: Keep enabled PWMs running while probing

Message ID 20200918204825.4744-1-simon@simonsouth.net (mailing list archive)
State New, archived
Headers show
Series pwm: rockchip: Keep enabled PWMs running while probing | expand

Commit Message

Simon South Sept. 18, 2020, 8:48 p.m. UTC
Following commit cfc4c189bc70 ("pwm: Read initial hardware state at
request time") the Rockchip PWM driver can no longer assume a device's
pwm_state structure has been populated after a call to pwmchip_add().
Consequently, the test in rockchip_pwm_probe() intended to prevent the
driver from stopping PWM devices already enabled by the bootloader no
longer functions reliably and this can lead to the kernel hanging
during startup, particularly on devices like the Pinebook Pro that use
a PWM-controlled backlight for their display.

Avoid this by querying the device directly at probe time to determine
whether or not it is enabled.

Signed-off-by: Simon South <simon@simonsouth.net>
---
 drivers/pwm/pwm-rockchip.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

Comments

Heiko Stübner Sept. 19, 2020, 8:35 a.m. UTC | #1
Hi Simon,

Am Freitag, 18. September 2020, 22:48:25 CEST schrieb Simon South:
> Following commit cfc4c189bc70 ("pwm: Read initial hardware state at
> request time") the Rockchip PWM driver can no longer assume a device's
> pwm_state structure has been populated after a call to pwmchip_add().
> Consequently, the test in rockchip_pwm_probe() intended to prevent the
> driver from stopping PWM devices already enabled by the bootloader no
> longer functions reliably and this can lead to the kernel hanging
> during startup, particularly on devices like the Pinebook Pro that use
> a PWM-controlled backlight for their display.
> 
> Avoid this by querying the device directly at probe time to determine
> whether or not it is enabled.
> 
> Signed-off-by: Simon South <simon@simonsouth.net>

On first glance this looks like a good catch but there is a bit of
housekeeping missing.

The patch should get a fixes tag like
Fixes: cfc4c189bc70 ("pwm: Read initial hardware state at request time")

Can you resend the patch and include relevant other parties like you get
from  'scripts/get_maintainer.pl -f drivers/pwm/pwm-rockchip.c' like

Thierry Reding <thierry.reding@gmail.com> (maintainer:PWM SUBSYSTEM)
"Uwe Kleine-König" <u.kleine-koenig@pengutronix.de> (reviewer:PWM SUBSYSTEM)
Lee Jones <lee.jones@linaro.org> (maintainer:PWM SUBSYSTEM)
linux-pwm@vger.kernel.org (open list:PWM SUBSYSTEM)


Thanks
Heiko

> ---
>  drivers/pwm/pwm-rockchip.c | 5 ++++-
>  1 file changed, 4 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/pwm/pwm-rockchip.c b/drivers/pwm/pwm-rockchip.c
> index eb8c9cb645a6..098e94335cb5 100644
> --- a/drivers/pwm/pwm-rockchip.c
> +++ b/drivers/pwm/pwm-rockchip.c
> @@ -288,6 +288,7 @@ static int rockchip_pwm_probe(struct platform_device *pdev)
>  	const struct of_device_id *id;
>  	struct rockchip_pwm_chip *pc;
>  	struct resource *r;
> +	u32 enable_conf, ctrl;
>  	int ret, count;
>  
>  	id = of_match_device(rockchip_pwm_dt_ids, &pdev->dev);
> @@ -362,7 +363,9 @@ static int rockchip_pwm_probe(struct platform_device *pdev)
>  	}
>  
>  	/* Keep the PWM clk enabled if the PWM appears to be up and running. */
> -	if (!pwm_is_enabled(pc->chip.pwms))
> +	enable_conf = pc->data->enable_conf;
> +	ctrl = readl_relaxed(pc->base + pc->data->regs.ctrl);
> +	if ((ctrl & enable_conf) != enable_conf)
>  		clk_disable(pc->clk);
>  
>  	return 0;
>
diff mbox series

Patch

diff --git a/drivers/pwm/pwm-rockchip.c b/drivers/pwm/pwm-rockchip.c
index eb8c9cb645a6..098e94335cb5 100644
--- a/drivers/pwm/pwm-rockchip.c
+++ b/drivers/pwm/pwm-rockchip.c
@@ -288,6 +288,7 @@  static int rockchip_pwm_probe(struct platform_device *pdev)
 	const struct of_device_id *id;
 	struct rockchip_pwm_chip *pc;
 	struct resource *r;
+	u32 enable_conf, ctrl;
 	int ret, count;
 
 	id = of_match_device(rockchip_pwm_dt_ids, &pdev->dev);
@@ -362,7 +363,9 @@  static int rockchip_pwm_probe(struct platform_device *pdev)
 	}
 
 	/* Keep the PWM clk enabled if the PWM appears to be up and running. */
-	if (!pwm_is_enabled(pc->chip.pwms))
+	enable_conf = pc->data->enable_conf;
+	ctrl = readl_relaxed(pc->base + pc->data->regs.ctrl);
+	if ((ctrl & enable_conf) != enable_conf)
 		clk_disable(pc->clk);
 
 	return 0;