Message ID | 20200923154024.11417-2-bruno.thomsen@gmail.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Series | [v3,1/2] dt-bindings: fsl: add kamstrup flex concentrator to schema | expand |
On Wed, Sep 23, 2020 at 05:40:24PM +0200, Bruno Thomsen wrote: > This adds support for the OMNIA Flex Concentrator product > from Kamstrup A/S. It's providing radio mesh communication > infrastructure for smart electricity meters. > > Kamstrup OMNIA is a modular and scalable smart grid platform. > > Signed-off-by: Bruno Thomsen <bruno.thomsen@gmail.com> > --- > Changes since version 2: > - Found root cause of Ethernet PHY auto detect issue and created > a mdio patch series that resolves the issue. > https://lore.kernel.org/netdev/20200730195749.4922-1-bruno.thomsen@gmail.com/ > - Ethernet PHY reset is using new MDIO bus reset. > - Ethernet PHY interrupt added. > - Removed SION from a few GPIOs used for Ethernet PHY. > > Changes since version 1: > - Sorted labeling nodes. > - Sorted pinctrl entries. > - Removed deprecated fec phy reset properties. > - Added mdio phy reset properties. > - Disabled phy type auto detection and added note to commit message. > - Fixed two comment typos. > > arch/arm/boot/dts/Makefile | 2 + > .../boot/dts/imx7d-flex-concentrator-mfg.dts | 25 ++ > arch/arm/boot/dts/imx7d-flex-concentrator.dts | 319 ++++++++++++++++++ > 3 files changed, 346 insertions(+) > create mode 100644 arch/arm/boot/dts/imx7d-flex-concentrator-mfg.dts > create mode 100644 arch/arm/boot/dts/imx7d-flex-concentrator.dts > > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile > index 4572db3fa5ae..15be5a2fe831 100644 > --- a/arch/arm/boot/dts/Makefile > +++ b/arch/arm/boot/dts/Makefile > @@ -634,6 +634,8 @@ dtb-$(CONFIG_SOC_IMX7D) += \ > imx7d-colibri-emmc-aster.dtb \ > imx7d-colibri-emmc-eval-v3.dtb \ > imx7d-colibri-eval-v3.dtb \ > + imx7d-flex-concentrator.dtb \ > + imx7d-flex-concentrator-mfg.dtb \ > imx7d-mba7.dtb \ > imx7d-meerkat96.dtb \ > imx7d-nitrogen7.dtb \ > diff --git a/arch/arm/boot/dts/imx7d-flex-concentrator-mfg.dts b/arch/arm/boot/dts/imx7d-flex-concentrator-mfg.dts > new file mode 100644 > index 000000000000..789f0837058f > --- /dev/null > +++ b/arch/arm/boot/dts/imx7d-flex-concentrator-mfg.dts > @@ -0,0 +1,25 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * Device Tree Source for Kamstrup OMNIA Flex Concentrator in > + * manufacturing/debugging mode. > + * > + * Copyright (C) 2020 Kamstrup A/S > + * Author: Bruno Thomsen <bruno.thomsen@gmail.com> > + */ > + > +/dts-v1/; > + > +#include "imx7d-flex-concentrator.dts" > + > +/ { > + model = "Kamstrup OMNIA Flex Concentrator - Manufacturing"; > + compatible = "kam,imx7d-flex-concentrator-mfg", "kam,imx7d-flex-concentrator", "fsl,imx7d"; 'make dtbs_check' reports the following issue: compatible: ['kam,imx7d-flex-concentrator-mfg', 'kam,imx7d-flex-concentrator', 'fsl,imx7d'] is too long I think dropping 'kam,imx7d-flex-concentrator' should fix it. > + > + chosen { > + stdout-path = &uart4; > + }; > +}; > + > +&uart4 { > + status = "okay"; > +}; > diff --git a/arch/arm/boot/dts/imx7d-flex-concentrator.dts b/arch/arm/boot/dts/imx7d-flex-concentrator.dts > new file mode 100644 > index 000000000000..9f73c79253cb > --- /dev/null > +++ b/arch/arm/boot/dts/imx7d-flex-concentrator.dts > @@ -0,0 +1,319 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * Device Tree Source for Kamstrup OMNIA Flex Concentrator. > + * > + * Copyright (C) 2020 Kamstrup A/S > + * Author: Bruno Thomsen <bruno.thomsen@gmail.com> > + */ > + > +/dts-v1/; > + > +#include "imx7d-tqma7.dtsi" > + > +/* Some I2C devices on TQMa7 SoM are not mounted */ > +/delete-node/ &m24c64; > +/delete-node/ &ds1339; > + > +/ { > + model = "Kamstrup OMNIA Flex Concentrator"; > + compatible = "kam,imx7d-flex-concentrator", "fsl,imx7d"; > + > + memory@80000000 { > + device_type = "memory"; > + /* 1024 MB - TQMa7D board configuration */ > + reg = <0x80000000 0x40000000>; > + }; > + > + reg_usb_otg2_vbus: regulator-usb-otg2-vbus { > + compatible = "regulator-fixed"; > + regulator-name = "VBUS_USBOTG2"; > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>; > + enable-active-high; > + }; > + > + reg_vref_1v8: regulator-vref-1v8 { > + compatible = "regulator-fixed"; > + regulator-name = "VCC1V8_REF"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-always-on; > + vin-supply = <&sw2_reg>; > + }; > + > + /* > + * Human Machine Interface consists of 4 dual red/green LEDs. > + * hmi-a-green is controlled directly by the switch-mode power supply. > + * hmi-a-red is not used. > + */ > + gpio-leds { > + compatible = "gpio-leds"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_leds>; > + > + hmi-b-red { gpio-leds: 'hmi-b-green', 'hmi-b-red', 'hmi-c-green', 'hmi-c-red', 'hmi-d-green', 'hmi-d-red' do not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+' From schema: Documentation/devicetree/bindings/leds/leds-gpio.yaml Shawn > + label = "hmi-b:red:provisioning"; > + gpios = <&gpio3 6 GPIO_ACTIVE_HIGH>; > + default-state = "off"; > + }; > + > + hmi-b-green { > + label = "hmi-b:green:operation"; > + gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>; > + default-state = "off"; > + }; > + > + hmi-c-red { > + label = "hmi-c:red:mesh-error"; > + gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>; > + default-state = "off"; > + }; > + > + hmi-c-green { > + label = "hmi-c:green:mesh-activity"; > + gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>; > + default-state = "off"; > + }; > + > + hmi-d-red { > + label = "hmi-d:red:wan-down"; > + gpios = <&gpio2 31 GPIO_ACTIVE_HIGH>; > + default-state = "off"; > + }; > + > + hmi-d-green { > + label = "hmi-d:green:ipsec-up"; > + gpios = <&gpio4 3 GPIO_ACTIVE_HIGH>; > + default-state = "off"; > + }; > + }; > + > + /* > + * Errata e10574 board restart workaround. > + */ > + gpio-restart { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_restart>; > + compatible = "gpio-restart"; > + gpios = <&gpio7 12 GPIO_ACTIVE_LOW>; > + priority = <200>; > + }; > +}; > + > +/* > + * Analog signals > + * ADC1_IN0: SMPS - 5V output monitor (voltage divider: 1/0.2806) > + */ > +&adc1 { > + vref-supply = <®_vref_1v8>; > + status = "okay"; > +}; > + > +&ecspi2 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_ecspi2>; > + num-chipselects = <1>; > + cs-gpios = <&gpio4 23 GPIO_ACTIVE_LOW>; > + status = "okay"; > + > + pcf2127: rtc@0 { > + compatible = "nxp,pcf2127"; > + reg = <0>; > + spi-max-frequency = <2000000>; > + }; > +}; > + > +&ecspi4 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_ecspi4>; > + num-chipselects = <1>; > + cs-gpios = <&gpio3 3 GPIO_ACTIVE_LOW>; > + status = "okay"; > + > + /* > + * ST chip maximum SPI clock frequency is 33 MHz. > + * > + * TCG specification - Section 6.4.1 Clocking: > + * TPM shall support a SPI clock frequency range of 10-24 MHz. > + */ > + st33htph: tpm-tis@0 { > + compatible = "st,st33htpm-spi", "tcg,tpm_tis-spi"; > + reg = <0>; > + spi-max-frequency = <24000000>; > + }; > +}; > + > +&fec1 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_enet1>; > + phy-mode = "rmii"; > + phy-handle = <ðphy>; > + status = "okay"; > + > + /* > + * MDIO bus reset is used to generate PHY device reset before > + * Ethernet PHY type ID auto-detection. Otherwise this communication > + * fails as device does not answer when recommended reset circuit > + * is used. > + */ > + mdio { > + #address-cells = <1>; > + #size-cells = <0>; > + > + reset-delay-us = <100000>; > + reset-post-delay-us = <500000>; > + reset-gpios = <&gpio7 15 GPIO_ACTIVE_LOW>; > + > + /* Microchip/Micrel KSZ8081RNB */ > + ethphy: ethernet-phy@1 { > + compatible = "ethernet-phy-ieee802.3-c22"; > + interrupt-parent = <&gpio1>; > + interrupts = <9 IRQ_TYPE_LEVEL_LOW>; > + reg = <1>; > + }; > + }; > +}; > + > +/* > + * Detection signals for internal USB modules. > + * Used for robust USB plug and play handling such as USB downstream port > + * power-cycle and USB hub reset in case of misbehaving or crashed modules. > + * > + * SMPS - AC input monitor based on zero crossing. > + * Used for last gasp notification. > + */ > +&gpio3 { > + gpio-line-names = "", "", "", "", "", "", "", "", > + "", "", "", "", "smps-ac-monitor", "", "usb-hub-reset", "", > + "", "", "", "", "", "", "", "", > + "", "module-b-detection", "", "module-a-detection", "", "", "", ""; > +}; > + > +/* > + * Tamper IRQ trigger timestamp reading. > + * Used for sealed cover opened/closed notification. > + */ > +&gpio5 { > + gpio-line-names = "", "", "", "", "", "", "", "", > + "", "", "", "", "rtc-tamper-irq", "", "", "", > + "", "", "", "", "", "", "", "", > + "", "", "", "", "", "", "", ""; > +}; > + > +&iomuxc { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_misc>; > + > + pinctrl_ecspi2: ecspi2grp { > + fsl,pins = < > + MX7D_PAD_ECSPI2_MISO__ECSPI2_MISO 0x7c /* X2-15 */ > + MX7D_PAD_ECSPI2_MOSI__ECSPI2_MOSI 0x74 /* X2-18 */ > + MX7D_PAD_ECSPI2_SCLK__ECSPI2_SCLK 0x74 /* X2-13 */ > + MX7D_PAD_ECSPI2_SS0__GPIO4_IO23 0x74 /* X2-20 */ > + /* RTC - Tamper IRQ */ > + MX7D_PAD_SD2_CLK__GPIO5_IO12 0x3c /* X1-92 */ > + >; > + }; > + > + pinctrl_ecspi4: ecspi4grp { > + fsl,pins = < > + MX7D_PAD_LCD_CLK__ECSPI4_MISO 0x7c /* X2-72 */ > + MX7D_PAD_LCD_ENABLE__ECSPI4_MOSI 0x74 /* X2-68 */ > + MX7D_PAD_LCD_HSYNC__ECSPI4_SCLK 0x74 /* X2-76 */ > + MX7D_PAD_LCD_VSYNC__GPIO3_IO3 0x74 /* X2-78 */ > + >; > + }; > + > + pinctrl_enet1: enet1grp { > + fsl,pins = < > + MX7D_PAD_GPIO1_IO10__ENET1_MDIO 0x03 /* X2-48 */ > + MX7D_PAD_GPIO1_IO11__ENET1_MDC 0x03 /* X2-46 */ > + MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0 0x71 /* X2-53 */ > + MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1 0x71 /* X2-55 */ > + MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL 0x71 /* X2-61 */ > + MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0 0x79 /* X2-56 */ > + MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1 0x79 /* X2-58 */ > + MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL 0x79 /* X2-64 */ > + MX7D_PAD_ENET1_RGMII_RXC__ENET1_RX_ER 0x73 /* X2-52 */ > + /* PHY reset: SRE_FAST, DSE_X1 */ > + MX7D_PAD_ENET1_COL__GPIO7_IO15 0x00 /* X1-96 */ > + /* Clock from PHY to MAC: 100kPU */ > + MX7D_PAD_GPIO1_IO12__CCM_ENET_REF_CLK1 0x70 /* X3-4 */ > + /* PHY interrupt: 100kPU, HYS */ > + MX7D_PAD_GPIO1_IO09__GPIO1_IO9 0x78 /* X1-80 */ > + >; > + }; > + > + pinctrl_leds: ledsgrp { > + fsl,pins = < > + MX7D_PAD_LCD_DATA01__GPIO3_IO6 0x14 /* X2-82 */ > + MX7D_PAD_EPDC_BDR0__GPIO2_IO28 0x14 /* X1-82 */ > + MX7D_PAD_EPDC_BDR1__GPIO2_IO29 0x14 /* X1-84 */ > + MX7D_PAD_EPDC_PWR_COM__GPIO2_IO30 0x14 /* X1-86 */ > + MX7D_PAD_EPDC_PWR_STAT__GPIO2_IO31 0x14 /* X1-88 */ > + MX7D_PAD_UART2_TX_DATA__GPIO4_IO3 0x14 /* X1-90 */ > + >; > + }; > + > + pinctrl_misc: miscgrp { > + fsl,pins = < > + /* Module A detection (low = present) */ > + MX7D_PAD_LCD_DATA22__GPIO3_IO27 0x7c /* X2-105 */ > + /* Module B detection (low = present) */ > + MX7D_PAD_LCD_DATA20__GPIO3_IO25 0x7c /* X2-103 */ > + /* SMPS - AC input monitor (high = failure) */ > + MX7D_PAD_LCD_DATA07__GPIO3_IO12 0x7c /* X2-88 */ > + /* USB - Hub reset */ > + MX7D_PAD_LCD_DATA09__GPIO3_IO14 0x74 /* X2-92 */ > + >; > + }; > + > + pinctrl_restart: restartgrp { > + fsl,pins = < > + MX7D_PAD_ENET1_TX_CLK__GPIO7_IO12 0x74 /* X1-94 */ > + >; > + }; > + > + pinctrl_uart4: uart4grp { > + fsl,pins = < > + MX7D_PAD_SAI2_TX_SYNC__UART4_DCE_RX 0x7e /* X3-14 */ > + MX7D_PAD_SAI2_TX_BCLK__UART4_DCE_TX 0x76 /* X3-16 */ > + >; > + }; > +}; > + > +&iomuxc_lpsr { > + pinctrl_usbotg2: usbotg2grp { > + fsl,pins = < > + MX7D_PAD_LPSR_GPIO1_IO06__USB_OTG2_OC 0x5c /* X3-11 */ > + MX7D_PAD_LPSR_GPIO1_IO07__GPIO1_IO7 0x59 /* X3-9 */ > + >; > + }; > + > +}; > + > +&uart4 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_uart4>; > + assigned-clocks = <&clks IMX7D_UART4_ROOT_SRC>; > + assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>; > +}; > + > +&usbotg2 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_usbotg2>; > + vbus-supply = <®_usb_otg2_vbus>; > + srp-disable; > + hnp-disable; > + adp-disable; > + dr_mode = "host"; > + status = "okay"; > +}; > + > +/* > + * External watchdog feature provided by pcf2127. > + */ > +&wdog1 { > + status = "disabled"; > +}; > -- > 2.26.2 >
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 4572db3fa5ae..15be5a2fe831 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -634,6 +634,8 @@ dtb-$(CONFIG_SOC_IMX7D) += \ imx7d-colibri-emmc-aster.dtb \ imx7d-colibri-emmc-eval-v3.dtb \ imx7d-colibri-eval-v3.dtb \ + imx7d-flex-concentrator.dtb \ + imx7d-flex-concentrator-mfg.dtb \ imx7d-mba7.dtb \ imx7d-meerkat96.dtb \ imx7d-nitrogen7.dtb \ diff --git a/arch/arm/boot/dts/imx7d-flex-concentrator-mfg.dts b/arch/arm/boot/dts/imx7d-flex-concentrator-mfg.dts new file mode 100644 index 000000000000..789f0837058f --- /dev/null +++ b/arch/arm/boot/dts/imx7d-flex-concentrator-mfg.dts @@ -0,0 +1,25 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for Kamstrup OMNIA Flex Concentrator in + * manufacturing/debugging mode. + * + * Copyright (C) 2020 Kamstrup A/S + * Author: Bruno Thomsen <bruno.thomsen@gmail.com> + */ + +/dts-v1/; + +#include "imx7d-flex-concentrator.dts" + +/ { + model = "Kamstrup OMNIA Flex Concentrator - Manufacturing"; + compatible = "kam,imx7d-flex-concentrator-mfg", "kam,imx7d-flex-concentrator", "fsl,imx7d"; + + chosen { + stdout-path = &uart4; + }; +}; + +&uart4 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx7d-flex-concentrator.dts b/arch/arm/boot/dts/imx7d-flex-concentrator.dts new file mode 100644 index 000000000000..9f73c79253cb --- /dev/null +++ b/arch/arm/boot/dts/imx7d-flex-concentrator.dts @@ -0,0 +1,319 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for Kamstrup OMNIA Flex Concentrator. + * + * Copyright (C) 2020 Kamstrup A/S + * Author: Bruno Thomsen <bruno.thomsen@gmail.com> + */ + +/dts-v1/; + +#include "imx7d-tqma7.dtsi" + +/* Some I2C devices on TQMa7 SoM are not mounted */ +/delete-node/ &m24c64; +/delete-node/ &ds1339; + +/ { + model = "Kamstrup OMNIA Flex Concentrator"; + compatible = "kam,imx7d-flex-concentrator", "fsl,imx7d"; + + memory@80000000 { + device_type = "memory"; + /* 1024 MB - TQMa7D board configuration */ + reg = <0x80000000 0x40000000>; + }; + + reg_usb_otg2_vbus: regulator-usb-otg2-vbus { + compatible = "regulator-fixed"; + regulator-name = "VBUS_USBOTG2"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_vref_1v8: regulator-vref-1v8 { + compatible = "regulator-fixed"; + regulator-name = "VCC1V8_REF"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + vin-supply = <&sw2_reg>; + }; + + /* + * Human Machine Interface consists of 4 dual red/green LEDs. + * hmi-a-green is controlled directly by the switch-mode power supply. + * hmi-a-red is not used. + */ + gpio-leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_leds>; + + hmi-b-red { + label = "hmi-b:red:provisioning"; + gpios = <&gpio3 6 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + hmi-b-green { + label = "hmi-b:green:operation"; + gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + hmi-c-red { + label = "hmi-c:red:mesh-error"; + gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + hmi-c-green { + label = "hmi-c:green:mesh-activity"; + gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + hmi-d-red { + label = "hmi-d:red:wan-down"; + gpios = <&gpio2 31 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + hmi-d-green { + label = "hmi-d:green:ipsec-up"; + gpios = <&gpio4 3 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + }; + + /* + * Errata e10574 board restart workaround. + */ + gpio-restart { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_restart>; + compatible = "gpio-restart"; + gpios = <&gpio7 12 GPIO_ACTIVE_LOW>; + priority = <200>; + }; +}; + +/* + * Analog signals + * ADC1_IN0: SMPS - 5V output monitor (voltage divider: 1/0.2806) + */ +&adc1 { + vref-supply = <®_vref_1v8>; + status = "okay"; +}; + +&ecspi2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi2>; + num-chipselects = <1>; + cs-gpios = <&gpio4 23 GPIO_ACTIVE_LOW>; + status = "okay"; + + pcf2127: rtc@0 { + compatible = "nxp,pcf2127"; + reg = <0>; + spi-max-frequency = <2000000>; + }; +}; + +&ecspi4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi4>; + num-chipselects = <1>; + cs-gpios = <&gpio3 3 GPIO_ACTIVE_LOW>; + status = "okay"; + + /* + * ST chip maximum SPI clock frequency is 33 MHz. + * + * TCG specification - Section 6.4.1 Clocking: + * TPM shall support a SPI clock frequency range of 10-24 MHz. + */ + st33htph: tpm-tis@0 { + compatible = "st,st33htpm-spi", "tcg,tpm_tis-spi"; + reg = <0>; + spi-max-frequency = <24000000>; + }; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet1>; + phy-mode = "rmii"; + phy-handle = <ðphy>; + status = "okay"; + + /* + * MDIO bus reset is used to generate PHY device reset before + * Ethernet PHY type ID auto-detection. Otherwise this communication + * fails as device does not answer when recommended reset circuit + * is used. + */ + mdio { + #address-cells = <1>; + #size-cells = <0>; + + reset-delay-us = <100000>; + reset-post-delay-us = <500000>; + reset-gpios = <&gpio7 15 GPIO_ACTIVE_LOW>; + + /* Microchip/Micrel KSZ8081RNB */ + ethphy: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + interrupt-parent = <&gpio1>; + interrupts = <9 IRQ_TYPE_LEVEL_LOW>; + reg = <1>; + }; + }; +}; + +/* + * Detection signals for internal USB modules. + * Used for robust USB plug and play handling such as USB downstream port + * power-cycle and USB hub reset in case of misbehaving or crashed modules. + * + * SMPS - AC input monitor based on zero crossing. + * Used for last gasp notification. + */ +&gpio3 { + gpio-line-names = "", "", "", "", "", "", "", "", + "", "", "", "", "smps-ac-monitor", "", "usb-hub-reset", "", + "", "", "", "", "", "", "", "", + "", "module-b-detection", "", "module-a-detection", "", "", "", ""; +}; + +/* + * Tamper IRQ trigger timestamp reading. + * Used for sealed cover opened/closed notification. + */ +&gpio5 { + gpio-line-names = "", "", "", "", "", "", "", "", + "", "", "", "", "rtc-tamper-irq", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", ""; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_misc>; + + pinctrl_ecspi2: ecspi2grp { + fsl,pins = < + MX7D_PAD_ECSPI2_MISO__ECSPI2_MISO 0x7c /* X2-15 */ + MX7D_PAD_ECSPI2_MOSI__ECSPI2_MOSI 0x74 /* X2-18 */ + MX7D_PAD_ECSPI2_SCLK__ECSPI2_SCLK 0x74 /* X2-13 */ + MX7D_PAD_ECSPI2_SS0__GPIO4_IO23 0x74 /* X2-20 */ + /* RTC - Tamper IRQ */ + MX7D_PAD_SD2_CLK__GPIO5_IO12 0x3c /* X1-92 */ + >; + }; + + pinctrl_ecspi4: ecspi4grp { + fsl,pins = < + MX7D_PAD_LCD_CLK__ECSPI4_MISO 0x7c /* X2-72 */ + MX7D_PAD_LCD_ENABLE__ECSPI4_MOSI 0x74 /* X2-68 */ + MX7D_PAD_LCD_HSYNC__ECSPI4_SCLK 0x74 /* X2-76 */ + MX7D_PAD_LCD_VSYNC__GPIO3_IO3 0x74 /* X2-78 */ + >; + }; + + pinctrl_enet1: enet1grp { + fsl,pins = < + MX7D_PAD_GPIO1_IO10__ENET1_MDIO 0x03 /* X2-48 */ + MX7D_PAD_GPIO1_IO11__ENET1_MDC 0x03 /* X2-46 */ + MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0 0x71 /* X2-53 */ + MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1 0x71 /* X2-55 */ + MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL 0x71 /* X2-61 */ + MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0 0x79 /* X2-56 */ + MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1 0x79 /* X2-58 */ + MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL 0x79 /* X2-64 */ + MX7D_PAD_ENET1_RGMII_RXC__ENET1_RX_ER 0x73 /* X2-52 */ + /* PHY reset: SRE_FAST, DSE_X1 */ + MX7D_PAD_ENET1_COL__GPIO7_IO15 0x00 /* X1-96 */ + /* Clock from PHY to MAC: 100kPU */ + MX7D_PAD_GPIO1_IO12__CCM_ENET_REF_CLK1 0x70 /* X3-4 */ + /* PHY interrupt: 100kPU, HYS */ + MX7D_PAD_GPIO1_IO09__GPIO1_IO9 0x78 /* X1-80 */ + >; + }; + + pinctrl_leds: ledsgrp { + fsl,pins = < + MX7D_PAD_LCD_DATA01__GPIO3_IO6 0x14 /* X2-82 */ + MX7D_PAD_EPDC_BDR0__GPIO2_IO28 0x14 /* X1-82 */ + MX7D_PAD_EPDC_BDR1__GPIO2_IO29 0x14 /* X1-84 */ + MX7D_PAD_EPDC_PWR_COM__GPIO2_IO30 0x14 /* X1-86 */ + MX7D_PAD_EPDC_PWR_STAT__GPIO2_IO31 0x14 /* X1-88 */ + MX7D_PAD_UART2_TX_DATA__GPIO4_IO3 0x14 /* X1-90 */ + >; + }; + + pinctrl_misc: miscgrp { + fsl,pins = < + /* Module A detection (low = present) */ + MX7D_PAD_LCD_DATA22__GPIO3_IO27 0x7c /* X2-105 */ + /* Module B detection (low = present) */ + MX7D_PAD_LCD_DATA20__GPIO3_IO25 0x7c /* X2-103 */ + /* SMPS - AC input monitor (high = failure) */ + MX7D_PAD_LCD_DATA07__GPIO3_IO12 0x7c /* X2-88 */ + /* USB - Hub reset */ + MX7D_PAD_LCD_DATA09__GPIO3_IO14 0x74 /* X2-92 */ + >; + }; + + pinctrl_restart: restartgrp { + fsl,pins = < + MX7D_PAD_ENET1_TX_CLK__GPIO7_IO12 0x74 /* X1-94 */ + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX7D_PAD_SAI2_TX_SYNC__UART4_DCE_RX 0x7e /* X3-14 */ + MX7D_PAD_SAI2_TX_BCLK__UART4_DCE_TX 0x76 /* X3-16 */ + >; + }; +}; + +&iomuxc_lpsr { + pinctrl_usbotg2: usbotg2grp { + fsl,pins = < + MX7D_PAD_LPSR_GPIO1_IO06__USB_OTG2_OC 0x5c /* X3-11 */ + MX7D_PAD_LPSR_GPIO1_IO07__GPIO1_IO7 0x59 /* X3-9 */ + >; + }; + +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + assigned-clocks = <&clks IMX7D_UART4_ROOT_SRC>; + assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>; +}; + +&usbotg2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg2>; + vbus-supply = <®_usb_otg2_vbus>; + srp-disable; + hnp-disable; + adp-disable; + dr_mode = "host"; + status = "okay"; +}; + +/* + * External watchdog feature provided by pcf2127. + */ +&wdog1 { + status = "disabled"; +};
This adds support for the OMNIA Flex Concentrator product from Kamstrup A/S. It's providing radio mesh communication infrastructure for smart electricity meters. Kamstrup OMNIA is a modular and scalable smart grid platform. Signed-off-by: Bruno Thomsen <bruno.thomsen@gmail.com> --- Changes since version 2: - Found root cause of Ethernet PHY auto detect issue and created a mdio patch series that resolves the issue. https://lore.kernel.org/netdev/20200730195749.4922-1-bruno.thomsen@gmail.com/ - Ethernet PHY reset is using new MDIO bus reset. - Ethernet PHY interrupt added. - Removed SION from a few GPIOs used for Ethernet PHY. Changes since version 1: - Sorted labeling nodes. - Sorted pinctrl entries. - Removed deprecated fec phy reset properties. - Added mdio phy reset properties. - Disabled phy type auto detection and added note to commit message. - Fixed two comment typos. arch/arm/boot/dts/Makefile | 2 + .../boot/dts/imx7d-flex-concentrator-mfg.dts | 25 ++ arch/arm/boot/dts/imx7d-flex-concentrator.dts | 319 ++++++++++++++++++ 3 files changed, 346 insertions(+) create mode 100644 arch/arm/boot/dts/imx7d-flex-concentrator-mfg.dts create mode 100644 arch/arm/boot/dts/imx7d-flex-concentrator.dts