diff mbox series

[v9,07/11] drm/i915: Make hardware readout work on i915.

Message ID 20200924184624.20522-7-manasi.d.navare@intel.com (mailing list archive)
State New, archived
Headers show
Series [v9,01/11] HAX to make DSC work on the icelake test system | expand

Commit Message

Navare, Manasi Sept. 24, 2020, 6:46 p.m. UTC 
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

Unfortunately I have no way to test this, but it should be correct
if the bios sets up bigjoiner in a sane way.

Skip iterating over bigjoiner slaves, only the master has the state we
care about.

Add the width of the bigjoiner slave to the reconstructed fb.

Hide the bigjoiner slave to userspace, and double the mode on bigjoiner
master.

And last, disable bigjoiner slave from primary if reconstruction fails.

v2:
* Manual Rebase (Manasi)

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
---
 drivers/gpu/drm/i915/display/intel_display.c | 64 +++++++++++++++++++-
 1 file changed, 62 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
index 7dfaeb8a759a..98c70f057344 100644
--- a/drivers/gpu/drm/i915/display/intel_display.c
+++ b/drivers/gpu/drm/i915/display/intel_display.c
@@ -3608,6 +3608,8 @@  intel_find_initial_plane_obj(struct intel_crtc *intel_crtc,
 	struct intel_plane *intel_plane = to_intel_plane(primary);
 	struct intel_plane_state *intel_state =
 		to_intel_plane_state(plane_state);
+	 struct intel_crtc_state *crtc_state =
+		 to_intel_crtc_state(intel_crtc->base.state);
 	struct drm_framebuffer *fb;
 	struct i915_vma *vma;
 
@@ -3630,7 +3632,7 @@  intel_find_initial_plane_obj(struct intel_crtc *intel_crtc,
 		if (c == &intel_crtc->base)
 			continue;
 
-		if (!to_intel_crtc(c)->active)
+		if (!to_intel_crtc_state(c->state)->uapi.active)
 			continue;
 
 		state = to_intel_plane_state(c->primary->state);
@@ -3652,6 +3654,11 @@  intel_find_initial_plane_obj(struct intel_crtc *intel_crtc,
 	 * pretend the BIOS never had it enabled.
 	 */
 	intel_plane_disable_noatomic(intel_crtc, intel_plane);
+	if (crtc_state->bigjoiner) {
+		struct intel_crtc *slave =
+			crtc_state->bigjoiner_linked_crtc;
+		intel_plane_disable_noatomic(slave, to_intel_plane(slave->base.primary));
+	}
 
 	return;
 
@@ -10627,6 +10634,7 @@  static void
 skl_get_initial_plane_config(struct intel_crtc *crtc,
 			     struct intel_initial_plane_config *plane_config)
 {
+	struct intel_crtc_state *crtc_state = to_intel_crtc_state(crtc->base.state);
 	struct drm_device *dev = crtc->base.dev;
 	struct drm_i915_private *dev_priv = to_i915(dev);
 	struct intel_plane *plane = to_intel_plane(crtc->base.primary);
@@ -10735,6 +10743,18 @@  skl_get_initial_plane_config(struct intel_crtc *crtc,
 	fb->height = ((val >> 16) & 0xffff) + 1;
 	fb->width = ((val >> 0) & 0xffff) + 1;
 
+	/* add bigjoiner slave as well, if the fb stretches both */
+	if (crtc_state->bigjoiner) {
+		enum pipe bigjoiner_pipe = crtc_state->bigjoiner_linked_crtc->pipe;
+
+		if (fb->width == crtc_state->pipe_src_w &&
+		    (intel_de_read(dev_priv, PLANE_SURF(pipe, plane_id)) & 0xfffff000) == plane_config->base) {
+			val = intel_de_read(dev_priv, PLANE_SIZE(bigjoiner_pipe, plane_id));
+			fb->height += ((val >> 16) & 0xfff) + 1;
+			fb->width += ((val >> 0) & 0x1fff) + 1;
+		}
+	}
+
 	val = intel_de_read(dev_priv, PLANE_STRIDE(pipe, plane_id));
 	stride_mult = skl_plane_stride_mult(fb, 0, DRM_MODE_ROTATE_0);
 	fb->pitches[0] = (val & 0x3ff) * stride_mult;
@@ -18577,7 +18597,8 @@  static void intel_sanitize_crtc(struct intel_crtc *crtc,
 
 	/* Adjust the state of the output pipe according to whether we
 	 * have active connectors/encoders. */
-	if (crtc_state->hw.active && !intel_crtc_has_encoders(crtc))
+	if (crtc_state->hw.active && !intel_crtc_has_encoders(crtc) &&
+	    !crtc_state->bigjoiner_slave)
 		intel_crtc_disable_noatomic(crtc, ctx);
 
 	if (crtc_state->hw.active || HAS_GMCH(dev_priv)) {
@@ -18854,6 +18875,9 @@  static void intel_modeset_readout_hw_state(struct drm_device *dev)
 		struct intel_plane *plane;
 		int min_cdclk = 0;
 
+		if (crtc_state->bigjoiner_slave)
+			continue;
+
 		if (crtc_state->hw.active) {
 			struct drm_display_mode mode;
 
@@ -18878,6 +18902,9 @@  static void intel_modeset_readout_hw_state(struct drm_device *dev)
 			mode.hdisplay = crtc_state->pipe_src_w;
 			mode.vdisplay = crtc_state->pipe_src_h;
 
+			if (crtc_state->bigjoiner)
+				mode.hdisplay *= 2;
+
 			intel_crtc_compute_pixel_rate(crtc_state);
 
 			intel_crtc_update_active_timings(crtc_state);
@@ -18928,6 +18955,39 @@  static void intel_modeset_readout_hw_state(struct drm_device *dev)
 		intel_bw_crtc_update(bw_state, crtc_state);
 
 		intel_pipe_config_sanity_check(dev_priv, crtc_state);
+
+		/* discard our incomplete slave state, copy it from master */
+		if (crtc_state->bigjoiner && crtc_state->hw.active) {
+			struct intel_crtc *slave = crtc_state->bigjoiner_linked_crtc;
+			struct intel_crtc_state *slave_crtc_state =
+				to_intel_crtc_state(slave->base.state);
+
+			copy_bigjoiner_crtc_state(slave_crtc_state, crtc_state);
+			slave->base.mode = crtc->base.mode;
+
+			cdclk_state->min_cdclk[slave->pipe] = min_cdclk;
+			cdclk_state->min_voltage_level[slave->pipe] =
+				crtc_state->min_voltage_level;
+
+			for_each_intel_plane_on_crtc(&dev_priv->drm, slave, plane) {
+				const struct intel_plane_state *plane_state =
+					to_intel_plane_state(plane->base.state);
+
+				/*
+				 * FIXME don't have the fb yet, so can't
+				 * use intel_plane_data_rate() :(
+				 */
+				if (plane_state->uapi.visible)
+					crtc_state->data_rate[plane->id] =
+						4 * crtc_state->pixel_rate;
+				else
+					crtc_state->data_rate[plane->id] = 0;
+			}
+
+			intel_bw_crtc_update(bw_state, slave_crtc_state);
+			drm_calc_timestamping_constants(&slave->base,
+							&slave_crtc_state->hw.adjusted_mode);
+		}
 	}
 }