| Message ID | 20200927091946.65491-1-f4bug@amsat.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | ssi: Display chip select polarity in monitor 'info qtree' | expand |
On Sun, Sep 27, 2020 at 2:20 AM Philippe Mathieu-Daudé <f4bug@amsat.org> wrote: > > It is sometime useful to verify a device chip select polarity > on a SPI bus. Since we have this information available, display > it in the 'info qtree' monitor output: > > $ qemu-system-arm -M lm3s6965evb -monitor stdio -S > (qemu) info qtree > [...] > dev: pl022, id "" > gpio-out "sysbus-irq" 1 > mmio 0000000040008000/0000000000001000 > bus: ssi > type SSI > dev: ssd0323, id "" > gpio-in "" 1 > gpio-in "ssi-gpio-cs" 1 > chip select polarity: high <--- > dev: ssi-sd, id "" > gpio-in "ssi-gpio-cs" 1 > chip select polarity: low <--- > bus: sd-bus > type sd-bus > dev: sd-card, id "" > spec_version = 2 (0x2) > drive = "sd0" > spi = true > > Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Alistair > --- > hw/ssi/ssi.c | 22 ++++++++++++++++++++++ > 1 file changed, 22 insertions(+) > > diff --git a/hw/ssi/ssi.c b/hw/ssi/ssi.c > index 4278d0e4440..4c9f8d66d23 100644 > --- a/hw/ssi/ssi.c > +++ b/hw/ssi/ssi.c > @@ -17,6 +17,7 @@ > #include "migration/vmstate.h" > #include "qemu/module.h" > #include "qapi/error.h" > +#include "monitor/monitor.h" > #include "qom/object.h" > > struct SSIBus { > @@ -26,10 +27,31 @@ struct SSIBus { > #define TYPE_SSI_BUS "SSI" > OBJECT_DECLARE_SIMPLE_TYPE(SSIBus, SSI_BUS) > > +static void ssi_print_dev(Monitor *mon, DeviceState *dev, int indent) > +{ > + static const char *const polarity_s[] = { > + [SSI_CS_NONE] = "unknown", > + [SSI_CS_LOW] = "low", > + [SSI_CS_HIGH] = "high" > + }; > + SSISlaveClass *ssc = SSI_SLAVE_GET_CLASS(dev); > + > + monitor_printf(mon, "%*schip select polarity: %s\n", > + indent, "", polarity_s[ssc->cs_polarity]); > +} > + > +static void ssi_bus_class_init(ObjectClass *klass, void *data) > +{ > + BusClass *k = BUS_CLASS(klass); > + > + k->print_dev = ssi_print_dev; > +} > + > static const TypeInfo ssi_bus_info = { > .name = TYPE_SSI_BUS, > .parent = TYPE_BUS, > .instance_size = sizeof(SSIBus), > + .class_init = ssi_bus_class_init, > }; > > static void ssi_cs_default(void *opaque, int n, int level) > -- > 2.26.2 > >
On 9/27/20 11:19 AM, Philippe Mathieu-Daudé wrote: > It is sometime useful to verify a device chip select polarity > on a SPI bus. Since we have this information available, display > it in the 'info qtree' monitor output: > > $ qemu-system-arm -M lm3s6965evb -monitor stdio -S > (qemu) info qtree > [...] > dev: pl022, id "" > gpio-out "sysbus-irq" 1 > mmio 0000000040008000/0000000000001000 > bus: ssi > type SSI > dev: ssd0323, id "" > gpio-in "" 1 > gpio-in "ssi-gpio-cs" 1 > chip select polarity: high <--- > dev: ssi-sd, id "" > gpio-in "ssi-gpio-cs" 1 > chip select polarity: low <--- > bus: sd-bus > type sd-bus > dev: sd-card, id "" > spec_version = 2 (0x2) > drive = "sd0" > spi = true > > Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Cédric Le Goater <clg@kaod.org> Tested-by: Cédric Le Goater <clg@kaod.org> Thanks, C. dev: aspeed.spi2-ast2600, id "" gpio-out "sysbus-irq" 2 num-cs = 1 (0x1) inject-failure = false sdram-base = 0 (0x0) mmio 000000001e641000/0000000000000100 mmio 0000000050000000/0000000010000000 bus: spi type SSI dev: aspeed.spi1-ast2600, id "" gpio-out "sysbus-irq" 2 num-cs = 1 (0x1) inject-failure = false sdram-base = 0 (0x0) mmio 000000001e630000/0000000000000100 mmio 0000000030000000/0000000010000000 bus: spi type SSI dev: mx66l1g45g, id "" gpio-in "ssi-gpio-cs" 1 nonvolatile-cfg = 36863 (0x8fff) spansion-cr1nv = 0 (0x0) spansion-cr2nv = 8 (0x8) spansion-cr3nv = 2 (0x2) spansion-cr4nv = 16 (0x10) drive = "mtd2" chip select polarity: low dev: aspeed.fmc-ast2600, id "" gpio-out "sysbus-irq" 3 num-cs = 2 (0x2) inject-failure = false sdram-base = 2147483648 (0x80000000) mmio 000000001e620000/0000000000000100 mmio 0000000020000000/0000000010000000 bus: spi type SSI dev: mx66l1g45g, id "" gpio-in "ssi-gpio-cs" 1 nonvolatile-cfg = 36863 (0x8fff) spansion-cr1nv = 0 (0x0) spansion-cr2nv = 8 (0x8) spansion-cr3nv = 2 (0x2) spansion-cr4nv = 16 (0x10) drive = "mtd1" chip select polarity: low dev: mx66l1g45g, id "" gpio-in "ssi-gpio-cs" 1 nonvolatile-cfg = 36863 (0x8fff) spansion-cr1nv = 0 (0x0) spansion-cr2nv = 8 (0x8) spansion-cr3nv = 2 (0x2) spansion-cr4nv = 16 (0x10) drive = "mtd0" chip select polarity: low
Hi Peter, Can you take this patch via your qemu-arm tree please? (most of SPI boards are ARM based) On 9/27/20 11:19 AM, Philippe Mathieu-Daudé wrote: > It is sometime useful to verify a device chip select polarity > on a SPI bus. Since we have this information available, display > it in the 'info qtree' monitor output: > > $ qemu-system-arm -M lm3s6965evb -monitor stdio -S > (qemu) info qtree > [...] > dev: pl022, id "" > gpio-out "sysbus-irq" 1 > mmio 0000000040008000/0000000000001000 > bus: ssi > type SSI > dev: ssd0323, id "" > gpio-in "" 1 > gpio-in "ssi-gpio-cs" 1 > chip select polarity: high <--- > dev: ssi-sd, id "" > gpio-in "ssi-gpio-cs" 1 > chip select polarity: low <--- > bus: sd-bus > type sd-bus > dev: sd-card, id "" > spec_version = 2 (0x2) > drive = "sd0" > spi = true > > Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> > --- > hw/ssi/ssi.c | 22 ++++++++++++++++++++++ > 1 file changed, 22 insertions(+) > > diff --git a/hw/ssi/ssi.c b/hw/ssi/ssi.c > index 4278d0e4440..4c9f8d66d23 100644 > --- a/hw/ssi/ssi.c > +++ b/hw/ssi/ssi.c > @@ -17,6 +17,7 @@ > #include "migration/vmstate.h" > #include "qemu/module.h" > #include "qapi/error.h" > +#include "monitor/monitor.h" > #include "qom/object.h" > > struct SSIBus { > @@ -26,10 +27,31 @@ struct SSIBus { > #define TYPE_SSI_BUS "SSI" > OBJECT_DECLARE_SIMPLE_TYPE(SSIBus, SSI_BUS) > > +static void ssi_print_dev(Monitor *mon, DeviceState *dev, int indent) > +{ > + static const char *const polarity_s[] = { > + [SSI_CS_NONE] = "unknown", > + [SSI_CS_LOW] = "low", > + [SSI_CS_HIGH] = "high" > + }; > + SSISlaveClass *ssc = SSI_SLAVE_GET_CLASS(dev); > + > + monitor_printf(mon, "%*schip select polarity: %s\n", > + indent, "", polarity_s[ssc->cs_polarity]); > +} > + > +static void ssi_bus_class_init(ObjectClass *klass, void *data) > +{ > + BusClass *k = BUS_CLASS(klass); > + > + k->print_dev = ssi_print_dev; > +} > + > static const TypeInfo ssi_bus_info = { > .name = TYPE_SSI_BUS, > .parent = TYPE_BUS, > .instance_size = sizeof(SSIBus), > + .class_init = ssi_bus_class_init, > }; > > static void ssi_cs_default(void *opaque, int n, int level) >
Cc'ing Markus for "Monitor" tree. On 10/5/20 9:44 AM, Philippe Mathieu-Daudé wrote: > Hi Peter, > > Can you take this patch via your qemu-arm tree please? > (most of SPI boards are ARM based) > > On 9/27/20 11:19 AM, Philippe Mathieu-Daudé wrote: >> It is sometime useful to verify a device chip select polarity >> on a SPI bus. Since we have this information available, display >> it in the 'info qtree' monitor output: >> >> $ qemu-system-arm -M lm3s6965evb -monitor stdio -S >> (qemu) info qtree >> [...] >> dev: pl022, id "" >> gpio-out "sysbus-irq" 1 >> mmio 0000000040008000/0000000000001000 >> bus: ssi >> type SSI >> dev: ssd0323, id "" >> gpio-in "" 1 >> gpio-in "ssi-gpio-cs" 1 >> chip select polarity: high <--- >> dev: ssi-sd, id "" >> gpio-in "ssi-gpio-cs" 1 >> chip select polarity: low <--- >> bus: sd-bus >> type sd-bus >> dev: sd-card, id "" >> spec_version = 2 (0x2) >> drive = "sd0" >> spi = true >> >> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> >> --- >> hw/ssi/ssi.c | 22 ++++++++++++++++++++++ >> 1 file changed, 22 insertions(+) >> >> diff --git a/hw/ssi/ssi.c b/hw/ssi/ssi.c >> index 4278d0e4440..4c9f8d66d23 100644 >> --- a/hw/ssi/ssi.c >> +++ b/hw/ssi/ssi.c >> @@ -17,6 +17,7 @@ >> #include "migration/vmstate.h" >> #include "qemu/module.h" >> #include "qapi/error.h" >> +#include "monitor/monitor.h" >> #include "qom/object.h" >> >> struct SSIBus { >> @@ -26,10 +27,31 @@ struct SSIBus { >> #define TYPE_SSI_BUS "SSI" >> OBJECT_DECLARE_SIMPLE_TYPE(SSIBus, SSI_BUS) >> >> +static void ssi_print_dev(Monitor *mon, DeviceState *dev, int indent) >> +{ >> + static const char *const polarity_s[] = { >> + [SSI_CS_NONE] = "unknown", >> + [SSI_CS_LOW] = "low", >> + [SSI_CS_HIGH] = "high" >> + }; >> + SSISlaveClass *ssc = SSI_SLAVE_GET_CLASS(dev); >> + >> + monitor_printf(mon, "%*schip select polarity: %s\n", >> + indent, "", polarity_s[ssc->cs_polarity]); >> +} >> + >> +static void ssi_bus_class_init(ObjectClass *klass, void *data) >> +{ >> + BusClass *k = BUS_CLASS(klass); >> + >> + k->print_dev = ssi_print_dev; >> +} >> + >> static const TypeInfo ssi_bus_info = { >> .name = TYPE_SSI_BUS, >> .parent = TYPE_BUS, >> .instance_size = sizeof(SSIBus), >> + .class_init = ssi_bus_class_init, >> }; >> >> static void ssi_cs_default(void *opaque, int n, int level) >> >
diff --git a/hw/ssi/ssi.c b/hw/ssi/ssi.c index 4278d0e4440..4c9f8d66d23 100644 --- a/hw/ssi/ssi.c +++ b/hw/ssi/ssi.c @@ -17,6 +17,7 @@ #include "migration/vmstate.h" #include "qemu/module.h" #include "qapi/error.h" +#include "monitor/monitor.h" #include "qom/object.h" struct SSIBus { @@ -26,10 +27,31 @@ struct SSIBus { #define TYPE_SSI_BUS "SSI" OBJECT_DECLARE_SIMPLE_TYPE(SSIBus, SSI_BUS) +static void ssi_print_dev(Monitor *mon, DeviceState *dev, int indent) +{ + static const char *const polarity_s[] = { + [SSI_CS_NONE] = "unknown", + [SSI_CS_LOW] = "low", + [SSI_CS_HIGH] = "high" + }; + SSISlaveClass *ssc = SSI_SLAVE_GET_CLASS(dev); + + monitor_printf(mon, "%*schip select polarity: %s\n", + indent, "", polarity_s[ssc->cs_polarity]); +} + +static void ssi_bus_class_init(ObjectClass *klass, void *data) +{ + BusClass *k = BUS_CLASS(klass); + + k->print_dev = ssi_print_dev; +} + static const TypeInfo ssi_bus_info = { .name = TYPE_SSI_BUS, .parent = TYPE_BUS, .instance_size = sizeof(SSIBus), + .class_init = ssi_bus_class_init, }; static void ssi_cs_default(void *opaque, int n, int level)
It is sometime useful to verify a device chip select polarity on a SPI bus. Since we have this information available, display it in the 'info qtree' monitor output: $ qemu-system-arm -M lm3s6965evb -monitor stdio -S (qemu) info qtree [...] dev: pl022, id "" gpio-out "sysbus-irq" 1 mmio 0000000040008000/0000000000001000 bus: ssi type SSI dev: ssd0323, id "" gpio-in "" 1 gpio-in "ssi-gpio-cs" 1 chip select polarity: high <--- dev: ssi-sd, id "" gpio-in "ssi-gpio-cs" 1 chip select polarity: low <--- bus: sd-bus type sd-bus dev: sd-card, id "" spec_version = 2 (0x2) drive = "sd0" spi = true Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> --- hw/ssi/ssi.c | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+)